DURAVIT Tulum Single Lever Basin And Bidet Mixer Instructions
- June 13, 2024
- DURAVIT
Table of Contents
- DURAVIT Tulum Single Lever Basin And Bidet Mixer
- Product Information
- Product Usage Instructions
- Explanation of the key words and symbols
- Technical data
- Safety instructions
- Mounting instructions
- Montage, Installation
- Bedienung, Operation
- Care&maintenance
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DURAVIT Tulum Single Lever Basin And Bidet Mixer
Product Information
-
Product Name: Tulum
-
Model Numbers: TU1010 0010, TU1011 0010, TU1020 0010, TU1021
0010, TU1010 0020, TU1011 0020, TU1020 0020, TU1021 0020, TU1040 0020, TU2400 0010 -
Languages: Arabic, Danish, German, English, Spanish, French, Italian, Dutch, Portuguese, Russian, Polish, Swedish, Norwegian, Finnish, Romanian, Croatian, Hungarian, Slovak, Czech
Product Usage Instructions
Target readership and qualifications
The Tulum product may only be installed by a qualified plumber.
Technical data
- Operating pressure: max. 1.0 MPa
- Recommended Test pressure: 0.3 – 0.5 MPa
- Hot water temperature: 1.6 MPa
Safety instructions
Cut and crushing injuries: Wear gloves when installing the product. Observe the local installation regulations and any country-specific standards at all times. Equalize pressure differences between cold and hot water connections. Observe the manufacturer’s instructions for installation with continuous flow heaters.
Mounting instructions
- Flushing and siliconising (diagram 01): Flush the pipes according to the applicable standards before mounting the tap unit. Enclose pipes with silicone that does not contain acetic acid to prevent tap unit malfunction and water damage.
These instructions are part of the Duravit product and must be read carefully and kept available at all times.
Target readership and qualifications
The product may only be installed by a qualified plumber.
Explanation of the key words and symbols
NOTICE
- Addresses practices not related to physical injury.
- Link to the mounting instructions in this section
- Prompt for inspection (e.g. for scratches)
- Prompt to inspect
- for leaks and leak-tightness
- Prompt to wear gloves
Technical data
- Operating pressure max. 1.0 MPa
- Recommended 0.3 – 0.5 MPa
- Test pressure 1.6 MPa 1 MPa = 10 bar = 145 PSI
- Hot water temperature max. 60 °C
Safety instructions
Cut and crushing injuries
Wear gloves when installing the product.
Product and/or property damage
- Observe the local installation regulations and any country-specific standards at all times.
- Equalise pressure differences between cold and hot water connections.
- Observe the manufacturer’s instructions for installation with continuous flow heaters.
Mounting instructions
Flushing and siliconising (diagram 01)
NOTICE
-
Tap unit malfunction due to dirty pipes
Flush the pipes according to the applicable standards before mounting the tap unit. -
Water damage
Enclose pipes with silicone that does not contain acetic acid.
Montage, Installation
Bedienung, Operation
Care&maintenance
DURAVIT AG
P.O. Box 240 Werderstr. 36
78132 Hornberg Germany
Phone +49 78 33 70 0 Fax +49 78 33 70 289
info@duravit.com
www.duravit.com
Order no. 57774/22.03.1 All illustrated products are subject to technical changes and design modifications.