nVent LENTON RBF15 Filler Material Owner’s Manual
- June 16, 2024
- nVent LENTON
Table of Contents
nVent LENTON RBF15 Filler Material
Product Information
Specifications
- Product Name: nVent LENTON Cadweld Filler Material
- Catalog Number: RBF15
- Filler Material Weight: 0.19 kg
Product Description
The nVent LENTON Cadweld filler material is a proprietary blend of iron and
aluminum. It is designed to be used in conjunction with the nVent LENTON
Cadweld Rebar Splicing System. Each bag of filler material is specifically
sized for a particular pouring basin, sleeve, and reinforcing steel
combination. The bag also contains a tube of starting powder, which is used to
initiate the exothermic reaction during the splicing process.
Features
- Non-explosive
- Not subject to spontaneous ignition
- Supplied in heavy-duty plastic bags for durability
Additional Product Details
Prior to installation, it is important to thoroughly read and understand all
of the detailed instructions and safety notices provided in the nVent LENTON
Cadweld Rebar Splicing System Instruction Manual.
WARNING
nVent products should only be installed and used as indicated in nVent’s
product instruction sheets and training materials. Failure to follow these
instructions and warnings may result in product malfunction, property damage,
serious bodily injury, and even death. It may also void your warranty.
Instruction sheets can be found at www.nvent.com or
obtained from your nVent customer service representative.
Contact Information
If you have any questions or need further assistance, please contact our
customer service representatives:
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Brands
Our powerful portfolio of brands includes nVent, CADDY, ERICO, HOFFMAN,
RAYCHEM, SCHROFF, and TRACER. All trademarks belong to their respective
owners.
Disclaimer
nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Prepare the Rebar Splicing System
- Ensure you have the correct pouring basin, sleeve, and reinforcing steel combination for the specific bag of filler material.
- Read the nVent LENTON Cadweld Rebar Splicing System Instruction Manual for detailed instructions on preparing the system.
Step 2: Open the Bag
Carefully open the heavy-duty plastic bag containing the filler material.
Ensure not to damage the tube of starting powder inside.
Step 3: Mix the Filler Material
Pour the filler material into a clean, dry container. Use a non-metallic tool
to thoroughly mix the iron and aluminum blend.
Step 4: Initiate the Exothermic Reaction
Take the tube of starting powder and carefully open it. Follow the
instructions provided in the nVent LENTON Cadweld Rebar Splicing System
Instruction Manual to initiate the exothermic reaction using the starting
powder.
Step 5: Apply the Filler Material
Quickly and evenly pour the mixed filler material into the pouring basin,
ensuring it covers the sleeve and reinforcing steel. Use a trowel or similar
tool to level and compact the filler material as required.
Step 6: Allow the Filler Material to Cure
Follow the recommended curing time provided in the nVent LENTON Cadweld Rebar
Splicing System Instruction Manual before proceeding with further construction
activities.
FILLER MATERIAL, 0.19 KG
Description
CATALOG NUMBER
RBF15
The nVent LENTON Cadweld filler material is a proprietary blend of iron and aluminum. Each bag of filler material is sized for a specific pouring basin, sleeve and reinforcing steel combination and contains a tube of starting powder used to initiate the exothermic reaction.
FEATURES
- Non-explosive
- Not subject to spontaneous ignition
- Supplied in heavy-duty plastic bags
PRODUCT ATTRIBUTES
- Unit Weight: 0.190 kg
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
Frequently Asked Questions
-
Q: Where can I find the nVent LENTON Cadweld Rebar Splicing System Instruction Manual?
A: The instruction manual can be found on the nVent website at www.nvent.com or obtained from your nVent customer service representative. -
Q: Can I use the filler material with any pouring basin, sleeve, and reinforcing steel combination?
A: No, each bag of filler material is specifically sized for a particular combination. Ensure you have the correct components for the specific bag of filler material. -
Q: Is the filler material flammable?
A: No, the filler material is non-explosive and not subject to spontaneous ignition.
Contact Information
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>