nVent LENTON RBTSB13545J Horizontal Pouring Basin Owner’s Manual
- June 15, 2024
- nVent LENTON
Table of Contents
nVent LENTON RBTSB13545J Horizontal Pouring Basin
Product Information
Specifications
- Catalog Number: RBTSB13545J
- Material: Graphite
- Diameter: 76 mm
- Length 1: 342 mm
- Length 2: 76 mm
- Width: 76 mm
- Height 1: 152 mm
- Height 2: 114 mm
- Unit Weight: 5.81 kg
Features:
- Made from heat-resistant graphite
- Durable, reusable, and long-lasting
- Designed for use with T-Series and B-Series horizontal top fill sleeves
Additional Product Details:
RBTSA pouring basins require one RBW341 pouring basin frame. RBTSB and
RBTSC pouring basins require one RBW341 pouring basin frame and two RBS5000
bolt retainers (all sold separately). Prior to installation, please read and
understand all of the detailed instructions and safety notices provided in the
nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Sizes not shown
may be available by special order. Contact your nVent LENTON representative
for more information.
Diagrams:
Contact Information:
- Europa Netherlands: +31 800-0200135
- France: +33 800 901 793
- Europa Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: +86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Brands:
Our powerful portfolio of brands:
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
Disclaimer:
All trademarks and brands mentioned above are the property of their
respective owners. nVent reserves the right to change specifications without
notice.
Product Usage Instructions
Step 1: Gather Required Materials
To use the RBTSB13545J pouring basin, you will need the following
materials:
- RBTSA pouring basin frame (sold separately)
- RBS5000 bolt retainers (two required for RBTSB and RBTSC pouring basins, sold separately)
Step 2: Read Safety Instructions
Prior to installation, it is essential to read and understand all of the
detailed instructions and safety notices provided in the nVent LENTON Cadweld
Rebar Splicing System Instruction Manual. Ensure you are familiar with the
safety precautions and recommended practices.
Step 3: Install Pouring Basin
Follow these steps to install the RBTSB13545J pouring basin:
- Position the RBTSB13545J pouring basin in the desired location on the T-Series or B-Series horizontal top fill sleeve.
- If using RBTSB or RBTSC pouring basins, ensure you have one RBW341 pouring basin frame and two RBS5000 bolt retainers ready.
- Attach the RBW341 pouring basin frame to the pouring basin according to the frame’s instructions.
- If using RBTSB or RBTSC pouring basins, secure the pouring basin to the sleeve using the two RBS5000 bolt retainers.
- Double-check that the pouring basin is securely attached and aligned properly.
Step 4: Special Orders
If the required size is not shown, you may be able to place a special
order. Contact your nVent LENTON representative for more information on how to
proceed with special orders.
Frequently Asked Questions (FAQ)
- Q: Are RBTSB13545J pouring basins compatible with all sleeve types?
- A: RBTSB13545J pouring basins are designed specifically for use with T-Series and B-Series horizontal top fill sleeves.
- Q: Can I reuse the RBTSB13545J pouring basin?
- A: Yes, RBTSB13545J pouring basins are durable, re-usable, and long-lasting.
- Q: Where can I find the nVent LENTON Cadweld Rebar Splicing System Instruction Manual?
- A: The nVent LENTON Cadweld Rebar Splicing System Instruction Manual should be included with your purchase. Please refer to the manual for detailed installation instructions and safety information.
HORIZONTAL POURING BASIN, TOP FILL, 90°, 76 MM DIA, 342 MM
CATALOG NUMBER
RBTSB13545J
90 degree top fill horizontal pouring basins are used when structural
interferences are directly above the tap hole in the sleeve.
FEATURES
- Made from heat-resistant graphite
- Durable, reusable and long-lasting
- Designed for use with T-Series and B-Series horizontal top-fill sleeves
PRODUCT ATTRIBUTES
- Material: Graphite
- Diameter: 76 mm
- Length 1: 342 mm
- Length 2: 76 mm
- Width: 76 mm
- Height 1: 152 mm
- Height 2: 114 mm
- Unit Weight: 5,81 kg
ADDITIONAL PRODUCT DETAILS
RBTSA pouring basins require one RBW341 pouring basin frame. RBTSB and RBTSC
pouring basins require one RBW341 pouring basin frame and two RBS5000 bolt
retainers (all sold separately). Prior to installation, please read and
understand all of the detailed instructions and safety notices provided in the
nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Sizes not shown
may be available by special order. Contact your nVent LENTON representative
for more information.
DIAGRAMS
NOTICE
- nVent products should be installed and used only as directed in the product instruction sheets and materials.
- nVent training program. Instruction sheets are available at www.nVent.com and from our sales representatives.
- nVent customer service. Improper installation, incorrect use, incorrect application or any other failure to follow.
- nVent instructions and warnings completely may lead to product malfunction, property damage, injury serious injury and death, and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
-
Shanghai:
+ 86 21 2412 1618/19 -
Sydney:
+61 2 9751 8500
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
Our powerful portfolio of brands: CADDY ERICO HOFFMAN RAYCHEM SCHROFF
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>