Body-Solid SPRSS Power Rack Strap Safeties Owner’s Manual
- June 4, 2024
- BODY SOLID
Table of Contents
Body-Solid SPRSS Power Rack Strap Safeties
Warning, Safety & Maintenance
Be sure that all users carefully read and understand all warning, safety and maintenance labels on the machine before each use. Failure to do so may result in death or serious injury.
It is imperative that you retain this Owner’s Manual and be sure all warning labels are legible and intact. Replacement Owner’s Manuals and warning labels are available from your local Body-Solid dealer.
If you have any questions about the operation, set up or maintenance of this machine please call our customer servicedepartment at 1 800-556-3113.
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
Inspect equipment before each workout. Check that all nuts, bolts, screws and
pop pins are in place and fully tightened. Also, before use, check cables for
sign of wear. Replace all worn arts immediatel . Never use machine if any
parts are dama ed or missin .
FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURUY
Keep clear of the cables and all moving parts when machine is in use.
Always make sure all Snap Links are closed when doing cable/pulley/strap
exercises.
Exercise with care. Perform your exercises at a smooth moderate pace; never
perform jerky or uncoordinated movements that may cause injury.
It is recommended that you workout with a training partner.
Do not allow children or minors to play on or around this equipment.
If unsure of proper use of equipment, call your local Body-Solid distributor
or the
Body-Solid customer service center at 1 -800-556-311 3.
WARNING: Consult your physician before starting your exercise program.
For your own safety, do not begin any exercise program without proper
instruction.
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete physicaln examination from your physician.
When using exercise equipment, you mshould alw ays take basic precautions, including the following:
-
Read all instructions before using the SPRSS.
These instructions are written to ensure your safety and to protect the unit. -
Do not remove any safety labels from the machine.
-
Do not allow children on or near the equipment.
-
Use the equipment only for its intended purpose as described in this guide. Do not use accessory attachments that are not recommended by the manufacturer. Such attachments might cause injuries.
-
Wear proper exercise clothing and shoes for your workout, no loose clothing.
-
Keep hands, limbs, loose clothing, and long hair well out of the way of all moving parts.
-
Use care when getting on or off the unit.
-
Do not overexert yourself or work to exhaustion.
-
If you feel any pain or abnormal symptoms, stop your workout immediately and consult your physician.
-
Never operate unit when it has been dropped or damaged. Return the equipment to a service center for examination and repair.
-
Never drop or insert objects into any opening in the equipment.
-
Always check the unit and its cables before each use. Make sure that all fasteners and cables are secure and in good working condition.
-
Do not use the equipment outdoors or near water.
Personal Safety During Assembly
-
Before beginning assembly, please take the time to read the instructions thoroughly.
-
Read each step in the assembly instructions and follow the steps in sequence. Do not skip ahead.
If you skip ahead, you may learn later that you have to disassemble components and that you may have damaged the equipment. -
Assemble and operate the SPRSS on a solid, level surface. Locate the unit a few feet from the walls or furniture to provide easy access.
The SPRSS is designed for your enjoyment. By following these precautions and using common sense, you will have many safe and pleasurable hours of healthful exercise with your Body-Solid Strap Safety System.
After assembly, you should check all functions to ensure correct operation. If you experience problems, first recheck the assembly instructions to locate any possible errors made during assembly. If you are unable to correct the problem, call the dealer from whom you purchased the machine or call 1-800-556-3113 for the dealer nearest you.
Obtaining Service
Please use this Owner’s Manual to make sure that all parts have been included in your shipment. When ordering parts, you must use the part number and description from this Owner’s Manual. Use only Body-Solid replacement parts when servicing this machine. Failure to do so will void your warranty and could result in personal injury.
For information about product operation or service, check out the official Body-Solid website at www.bodysolid.com or contact an authorized Body-Solid dealer or a Body-Solid factory-authorized service company or contact Body-Solid customer service at one of the following:
Toll Free: 1-800-556-3113
Phone: 1-708-427-3555
Fax: 1-708-427-3556
Hours: M-F 8:30-5:00 CST
E-Mail: service@bodysolid.com
Or write to: Body-Solid, Inc.
Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Retain this Ow ner’s Manual for future
reference. If you need to order replacement parts please be prepared to
provide the follow ing information w hen contacting us so that w e can assist
you better.
- Model Number
- Place of Purchase
- Serial Number (S/N)
- Part # and Description
Preparation
Thank you for purchasing the SPRSS. This Product is part of the Body-Solid line of quality strength training machines, which lets you target specific muscle groups to achieve better muscle tone and overall body conditioning. To maximize your use of the equipment please study this Owner’s Manual thoroughly
Required Tools
The basic tools that you must obtain before assembling
the SPRSS include but are not limited to:
- Standard Wrench Set
- Metric Wrench Set
- Adjustable Wrench
Installation Requirements
Follow these installation requirements when assembling the SPRSS:Set up the
SPRSS on a solid, flat surface.
A smooth, flat surface under the machine helps keep it level. A level machine
has fewer malfunctions.
Provide ample space around the machine. Open space around the machine allows for easier access.
Insert all bolts in the same direction. For aesthetic purposes, insert all bolts in the same direction unless specified (in text or illustrations) to do otherwise.
Leave room for adjustments. Tighten fasteners such as bolts, nuts, and screws so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly steps to do so.
Fill out and mail the warranty card.
Assembly Tips
Read all “Notes” on each page before beginning each step.
While you may be able to assemble the SPRSS using the illustrations only, important safety notes and other tips are included in the text.
Some pieces may have extra holes that you will not use.
Use only those holes indicated in the instructions and illustrations.
NOTE: With so many assembled parts, proper alignment and adjustment is critical. While tightening the nuts and bolts, be sure to leave room for adjustments.
CAUTION: Obtain assistance! If you feel like you can’t assemble the SPRSS by yourself then do not attempt to do so as this could result in injury. Review the installation requirements before proceeding with the following steps.
Body-Solid continually seeks ways to improve the performance, specifications and product manuals in order to ensure that only superior products are released from our factories. Please take the time to carefully read through this manual thoroughly. Instructions contained in this document are not intended to cover all details or variations possible with Body-Solid equipment, or to cover every contingency that may be met in conjunction with installation, operation, maintenance or troubleshooting of the equipment. Even though we have prepared this manual with extreme care, neither the publisher nor the author can accept responsibility for any errors in, or omission from, the information given. Should additional information be required, or should situations arise that are not covered by this manual, the matter should be directed to your local Body-Solid representative, or the Service Department at Body-Solid Inc. in Forest Park, Illinois.
SPRSS Hardw are Illustration
SPRSS Parts & Hardw are List
| Part# | Qty | Description |
|---|---|---|
| A | 4 | STEEL BRACKET |
| 1 | 4 | M16x115mm HEX HEAD BOLT |
| 2 | 8 | M16 WASHER |
| 3 | 4 | NYLON LOCK NUT |
| 4 | 4 | QUICK RELEASE PIN |
| 5 | 2 | SAFETY STRAP |
Assembly Instructions
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardw are in this step. Wrench tighten ALL hardw are at the
end until the
last step. Some components may be pre-assembled.
**1A.** Attach Steel Brackets (A) to the Uprights of the Power Rack
using Quick Release Pin (4).
**1B.** Attach Safety Traps (5) to the Steel Brackets using:
4 – (#1) M16x115mm Hex Head Bolt
8 – (#2) M16 Flat Washer
4 – (#3) M16 Nylon Lock Nut
Installation Instructions
SPRSS Exploded View
PLEASE WRITE YOUR SERIAL NUMBER IN THE BOXES BELOW
1900 S. Des Plaines Ave.
Forest Park, IL 60130
Phone:(708)427-3555
Fax:(708)427-3556
Hours: M-F 8:30 – 5:00 CST
Copyright 2009. Body-Solid. All rights reserved. Body-Solid reserves the
right to change design and specifications when we feel it will improve the
product.
Body-Solid machines maintain several patented and patent pending features
and designs. All rights reserved on all design patents and utility patents.
Documents / Resources
|
Body-Solid SPRSS Power Rack Strap
Safeties
[pdf] Owner's Manual
SPRSS Power Rack Strap Safeties, SPRSS Strap Safeties, Power Rack Strap
Safeties, SPRSS, Strap Safeties, Rack Strap Safeties, Power Rack
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>