OOWOKS 20W Spiral Wall Lamp Instruction Manual
- August 30, 2024
- OOWOKS
Table of Contents
OOWOKS 20W Spiral Wall Lamp
INSTRUCTION MANUAL
Important
If you have questions about installation, visit the website https://goecolighting.fr/ for an installation video.
To fully enjoy your new lamps and to maximize it’s efficiency,please read and store all installation,care and safety instructions and any other attached information brochures detailing special product features.
IMPORTANT!
Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
WARNING!
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Safety Directions
Please read this information carefully before installing or using this product.Please keep this user manual for further reference.
1. The lamps may only be installed by authorized and qualified technicians
according the valid regulations for electrical installation.
2. The manufacturer does not accept any responsibility for injuries or damage
resulting from improper use of the light.
3. Maintenance of the lights is limited to the surfaces.When doing this,no
moisture must come in to contact with any areas of the terminal connections or
mains voltage control parts.Use the light only in d ry areas.Do not use it for
professional purposes.
4. Warning! Before drilling the mounting holes,make sure that no gas,water or
electricity pipes and wires can be drilled through or damaged in your chosen
mounting location.
5. When mounting the wall or ceiling fixture,ensu re that the attachment
material is suitable for the subsurface and that this surface is capable of
carrying the weight of the fixture.The manufacturer is not liable for improper
installation of the item on the relevant subsurface.
6. lf you give the light to someone else, also hand over this instruction
sheet and all attached documents.
7. Before first use,check that the i llu mi na nt is firmly seated in its
socket,check that a II safety and decorative panels are in perfect condition,
and make sure that they are correctly held in place.
8. lf silicon sleeves are provided for the light,these must be placed over
the mains connection wires to protect against heat.
9. Do not install the light on a damp or conductive subsurface.
10. Protective covers and end covers for mains voltage control parts must always be mounted.
11. Please make sure that no cables get damaged during the installation work.
12. Attention! During operation,lamp parts and illuminants can reach
temperatures of more than 60°C.Do not touch du ring operation!
13. Do not look directly into the light source (illuminant,LED,etc)
14. In order to prevent haza rds,a damaged exterior flexible cable belonging
to this light should be replaced only by the manufacturer,his service
center,or a comparable specialist.
15. Keep the light out of the reach of children.
PART LIST
INSTRUCTION
Installation:
Follow these steps to install the product:
- Refer to the installation video on the website https://goecolighting.fr/
- Identify the mounting location
- Securely mount the product using the provided hardware
- Connect the power source
Operation:
To operate the product:
- Turn on the power source
- Use the included remote control to adjust brightness and color temperature
- Ensure proper ventilation around the product for optimal performance
Specifications:
- Model: XYZ-1000
- Power Consumption: 50W
- Color Temperature: 5000K
- Lumens: 5000lm
- Material: Aluminum
Maintenance:
To maintain the product:
- Regularly clean the surface with a soft, dry cloth
- Avoid using harsh chemicals or abrasive materials
- Inspect for any damage or loose connections periodically
Explanation of Symbols
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment.
The product complies with the currently valid European directives.Voluntary declaration by distributors and manufacturers that the products are in conformity with the laws and directives of the EU.
Caution: Danger of an electric shock
This light must be connected to the earthed conquctor-terminal with the earthed conductor (green-yellow wire)
The Green Dot is a license symbol used on packaging in some European markets which shows that a fee has been paid to fund the recycling of that packaging when it becomes waste.
The lights have a protection class rating of “IP20” and are solely intended for use in interior areas of private households.
Should install the luminaire indoor.
The manufacturer /dealer hereby shows that the product complies with the German packaging guidelines.
The manufacturer /dealer hereby shows that the product complies with the France packaging guidelines.
The recycling code shows what material the packaging is made of and thus defines the recycling cycle into which it is returned. In this case “20” – corrugated board.
WARRANTY PROVISIONS
In addition to the statutory warranty, We grants a warranty pursuant to the following provisions to you for specific products as well. Your statutory rights in particular regarding guarantee and consumer protection are not limited by this in any manner.
1. Products for which a warranty is granted are marked with the corresponding
print on the packaging.
2. The warranty period is one year. The warranty periods shall commence on
the date of purchase of the product by the first end customer. Please keep the
purchasing voucher as evidence.
3. The warranty shall apply to any products purchased by the end customer in
the territory of the European Union or UK.
4. In case of defects due to material and/or manufacturing errors, free
removal of defects shall be provided if they a re asserted during the warranty
period.
5. In case of warranty, please contact the us through the channel you
purchased the product from. Visit website https://goecolighting.fr/ also
could more help.
6. Warranty claims shall be excluded at minor deviations from the target
properties that are not relevant for the product’s value and suita billity for
use, as well as in case of defects caused by abusive or improper treatment,
environmental influences (moisture, heat, overvoltage, dust, current or mains
fluctuations,oxidised surfaces/flash rust pollshed away specifically in
coastal regions,etc.) and in case of damage to breakable components (e.g.
glass) or consumables (e.g, batteries
Frequently Asked Questions (FAQ):
Q: Can I use this product outdoors?
A: This product is designed for indoor use only.
Q: How do I reset the product?
A: To reset the product, turn it off, disconnect from power, wait for 10 seconds, and then reconnect and turn it back on.
Q: What should I do if the product malfunctions?
A: If you encounter any issues with the product, refer to the troubleshooting section in the user manual or contact customer support for assistance.