Body-Solid SFID325 Pro Clubline Adjustable Bench Owner’s Manual
- June 5, 2024
- BODY SOLID
Table of Contents
Body-Solid SFID325 Pro Clubline Adjustable Bench Owner’s Manual
Assembly Instructions
**Be careful to assemble all components in the sequence they are
presented.**
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of
step 2.
-
A. Attach rear leg (C) to mainframe (A) as shown using:
two 18 (Hex Bolt M12 X 105mm)
four 23 (Flat Washer 12mm)
two 27 (Nylon Lock Nut M12) -
B. Attach two End Cap (16) to Back Pad Support structure (B) handle as shown using:
two 16 (End Cap Ø25)
two 29 (spring washer 6mm) -
C. Attach two End Cap (16) to Seat Support Structure (D) handle as shown using:
two 16 (End Cap Ø25)
two 29 (spring washer 6mm) -
D. Attach two End Cap (17) to mainframe (A) front handle as shown using:
one 17 (End Cap Ø30)
one 26 (spring washer 8mm)
Above shows STEP 1 assembled and completed.
Be careful to assemble all components in the sequence they are
presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of
step 2.
-
A. Attach Back Pad (8) with Pad Wrap (9) to Back Pad Structure (E) as shown using:
four 20 (hex bolt M8 x 55 mm)
four 26 (spring washer 8mm)
four 25 (flat washer 8mm) -
B. Attach Seat Pad (7) to Seat Pad Structure (F) as shown using:
two 21 (hex bolt M8 x 21 mm)
two 26 (spring washer 8mm)
**two 25 (flat washer 8mm)
Above shows STEP 2 assembled and completed.
**
SFID325 Hardware
( Actual Size Shown)
-
(18) HEX BOLT 12mm X 105mm PARTIAL THREAD QTY. 2
-
(19) HEX BOLT M8 X 60mm PARTIAL THREAD QTY. 2
-
(20) HEX BOLT M8 X 55mm PARTIAL THREAD QTY. 4
-
(21) HEX BOLT M8 X 25mm PARTIAL THREAD QTY. 2
-
(22) ROUND ALLEN HEAD M8 X 15mm FULL THREAD BOLT QTY. 8
-
(27) NYLON LOCK NUT 12mm QTY. 2
-
(28) NYLON LOCK NUT 8mm QTY. 2
-
(23) FLAT WASHER 12mm QTY.4
-
(24) BIG FLAT WASHER 8mm QTY. 8
-
(25) FLAT WASHER 8mm QTY. 10
-
(26) SPRING WASHER 8mm QTY. 15
-
(29) SPRING WASHER 8mm QTY. 4
Main frame Parts List
| Part# | Qty | Description |
|---|---|---|
| 1 | 2 | shaft |
| 2 | 4 | Long Bushing |
| 3 | 10 | Short Bushing |
| 4 | 2 | Bushing Φ30 |
| 5 | 1 | Seat Pad Structure Shaft |
| 6 | 1 | Main Pivot Shaft |
| 7 | 1 | Seat Pad |
| 8 | 1 | Back Pad |
| 9 | 1 | Pad Wrap |
| 10 | 1 | Back Frame Support Tubing |
| 11 | 2 | Back Pad Structure End Cap |
| 12 | 2 | Transfer Wheel |
| 13 | 1 | Front Handle Foam Grip |
| 14 | 4 | Side Handle Foam Grip |
| 15 | 4 | Plug |
| 16 | 4 | End Cap Φ25 |
| 17 | 2 | End Cap Φ30 |
| 18 | 2 | Hex Bolt M12 X 105mm |
| 19 | 4 | Hex Bolt M8 X 60mm |
| 20 | 2 | Hex Bolt M8 X 55mm |
| 21 | 8 | Hex Bolt M8 X 25mm |
| 22 | 4 | Round Allen Head Bolt M8 X 15mm |
| 23 | 8 | Flat Washer 12mm |
| 24 | 10 | Big Flat Washer 8mm |
| 25 | 14 | Flat Washer 8mm |
| 26 | 2 | Spring Washer 8mm |
| 27 | 2 | Nylon Lock Nut M12 |
| 28 | 4 | Nylon Lock Nut M8 |
| 29 | 2 | Spring Washer 6mm |
| 30 | 1 | Spring Washer 10mm |
| 31 | 1 | Round Allen Head Bolt M10 X 20mm |
| 32 | 1 | Back Pad Rubber Stopper |
| A | 1 | Bottom Frame |
| B | 1 | Rear Frame |
| C | 1 | Rear Leg |
| D | 1 | Seat Pad Support Frame |
| E | 1 | Back Pad Frame |
| F | 1 | Seat Pad Board |
SFID325 Exploded View
© Copyright 2010. Body-Solid. All rights reserved. Body-Solid reserves the
right to change design and specifications when we feel it will improve the
product.
Body-Solid machines maintain several patented and patent pending features and
designs. All rights reserved on all design patents and utility patents.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>