Body-Solid GSCL360 Leverage Squat/Calf Raise Machine Instruction Manual
- June 9, 2024
- BODY SOLID
Table of Contents
GSCL360 Leverage Squat/Calf Raise Machine
Instruction Manual
GSCL360 Leverage Squat/Calf Raise Machine
HARDWARE ILLUSTRATION SHEET
| Qty.
---|---
A1. M12x100 HEX HEAD BOLT| [12PCS]
A2. M10x100 HEX HEAD BOLT| [2PCS]
A3. M10x70 CARRIAGE BOLT| [2PCS]
A4. M8x70 HEX HEAD BOLT| [2PCS]
A5. M8x65 HEX HEAD BOLT| [2PCS]
A6. M8x40 HEX HEAD BOLT| [4PCS]
A7.3/8″x2 3/4″ HEX HEAD BOLT (pre-installed)| [4PCS]
A8. M12x25 HEX HEAD BOLT (pre-installed)| [2PCS]
A9. M12x70 HEX HEAD BOLT (pre-installed)| [2PCS]
A10. M10x16 ROUND BOLT (pre-installed)| [10PCS]
B1. M12 NYLON LOCK NUT| [12PCS]
B2. M10 NYLON LOCK NUT| [4PCS]
B3. 3/8″ NYLON LOCK NUT (pre-installed)| [4PCS]
C1. M12 (I.D) WASHER (4 are pre-installed)| [28PCS]
C2. M10 (I.D) WASHER (10 are pre-installed)| [16PCS]
C3. M8 (I.D) WASHER| [8PCS]
C4. M8 SPRING WASHER| [8PCS]
C5. 3/8″ (I.D) WASHER (pre-installed)| [8PCS]
C6. M20 (I.D) WASHER (pre-installed)| [2PCS]
C7. M12 SPRING WASHER (pre-installed)| [2PCS]
PARTS ILLUSTRATION SHEET
| Qty.
---|---
D1. 2″x2″ PLASTIC COVER (9310-020)| [2PCS]
D2. 50×50 END CAP (9211-087)| [2PCS]
D4. 25×50 END CAP (9211-086)| [8PCS]
D5. Ø1″ ROUND END CAP (9211-021)| [2PCS]
D6. Ø49.5 ROUND END CAP (9211-074)| [4PCS]
D7. 50×75 FOOT CAP (9211-025)| [5PCS]
D8. Ø60 ROUND END CAP (9211-075)| [2PCS]
D9. 50×75 RUBBER DOUNT (9212-011)| [1PCS]
D10. Ø90x10t RUBBER DOUNT (9310-016)| [4PCS]
D11. NON SKID TAPE (9630-003)| [2PCS]
D12. Ø20×1.5x70L STEEL SPRINGS (8840-012)| [1PCS]
D13. STORAGE PIN (8220-086)| [1PCS]
D14. OILITE BUSHING Ø20xØ26 (8520-003) (pre-installed)| [2PCS]
E1. BEARING 6004zz (pre-installed)| [4PCS]
PARTS ILLUSTRATION SHEET
Assembly Step 1
Assembly Step 2