Body-Solid GAR75 Corner Storage Stand Owner’s Manual
- May 15, 2024
- BODY SOLID
Table of Contents
Body-Solid GAR75 Corner Storage Stand
Warning, Safety & Maintenance
Be sure that all users carefully read and understand all warning, safety and maintenance labels on the machine before each use. Failure to do so may result in death or serious injury. You must retain this Owner’s Manual and be sure all warning labels are legible and intact. Replacement Owner’s Manuals and warning labels are available from your local Body-Solid dealer. If you have any questions about the operation, set or maintenance of this machine please call our customer service department at 1 (800) 556-3113.
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each
workout. Check that all nuts, bolts, screws and pop pins are in place and
fully tightened. Also, before use, check cables for signs of wear. Replace all
worn parts immediately. Never use the machine if any parts are damaged or
missing.
FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.
Keep clear of the cables and all moving parts when the machine is in use.
Always make sure all Snap Links are closed when doing cable/pulley/strap
exercises. Exercise with care. Perform your exercises at a smooth moderate
pace; never perform jerky or uncoordinated movements that may cause injury. It
is recommended that you work out with a training partner. Do not allow
children or minors to play on or around this equipment. If unsure of the
proper use of equipment, call your local Body-Solid distributor or the Body-
Solid customer service centre at 1-800-556-3113.
WARNING: Consult your physician before starting your exercise program.
For your safety, do not begin any exercise program without proper instruction.
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete physical
examination from your physician.When using exercise equipment, you should
always take basic precautions, including the following:
Read all instructions before using the GAR75. These instructions are written
to ensure your safety and to protect the unit.
- Do not remove any safety labels from the machine.
- Do not allow children on or near the equipment.
- Use the equipment only for its intended purpose as described in this guide. Do not use accessory attachments that are not recommended by the manufacturer. Such attachments might cause injuries.
- Wear proper exercise clothing and shoes for your workout, no loose clothing.
- Keep hands, limbs, loose clothing, and long hair well out of the way of all moving parts.
- Use care when getting on or off the unit.
- Do not overexert yourself or work to exhaustion.
- If you feel any pain or abnormal symptoms, stop your workout immediately and consult your physician.
- Never operate the unit when it has been dropped or damaged. Return the equipment to a service centre for examination and repair.
- Never drop or insert objects into any opening in the equipment.
- Always check the unit and its cables before each use. Make sure that all fasteners and cables are secure and in good working condition.
- Do not use the equipment outdoors or near water.
Personal Safety During Assembly
- Before beginning assembly, please take the time to read the instructions thoroughly.
- Read each step in the assembly instructions and follow the steps in sequence. Do not skip ahead.
- If you skip ahead, you may learn later that you have to disassemble components and that you may have damaged the equipment.
- Assemble and operate the GAR75 on a solid, level surface. Locate the unit a few feet from the walls or furniture to provide easy access.
- The GAR75 is designed for your enjoyment. By following these precautions and using common sense, you will have many safe and pleasurable hours of healthful exercise with your Body-Solid Corner Accessory Rack.
- After assembly, you should check all functions to ensure correct operation. If you experience problems, first recheck the assembly instructions to locate any possible errors made during assembly. If you are unable to correct the problem, call the dealer from whom you purchased the machine or call 1-800-556-3113 for the dealer nearest you.
Obtaining Service
Please use this Owner’s Manual to make sure that all parts have been included
in your shipment. When ordering parts, you must use the part number and
description from this Owner’s Manual. Use only
Body-Solid replacement parts when servicing this machine. Failure to do so
will void your warranty and could result in personal injury. For information
about product operation or service, check out the official Body-Solid website
at www.bodysolid.com or contact an authorized
Body-Solid dealer or a Body-Solid factory-authorized service company or
contact the Body-Solid customer service at one of the following:
Toll Free: 1-800-556-3113
Phone: 1-708-427-3555
Fax: 1-708-427-3556
Hours: M-F 8:30-5:00 CST
E-Mail: service@bodysolid.com
Or write to Body-Solid, Inc.
Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Retain this Owner’s Manual for future reference. If you need to order replacement parts please be prepared to provide the following information when contacting us so that we can assist you better.
- Model Number
- Place of Purchase
- Serial Number (S/N)
- Part # and Description
Preparation
Thank you for purchasing the GAR75. This bench is part of the Body-Solid line of quality strength training machines, which lets you target specific muscle groups to achieve better muscle tone and overall body conditioning. To maximize your use of the equipment please study this Owner’s Manual thoroughly.
Required Tools
The basic tools that you must obtain before assembling the GAR75 include but
are not limited to:
- Metric Allen Key Set
- Standard Allen Key Set
- Standard Wrench Set
- Metric Wrench Set
- Adjustable Wrench
- Screwdriver (standard and/or phillips)
Installation Requirements
Follow these installation requirements when assembling the GAR75: Set up the
GAR75 on a solid, flat surface. A smooth, flat surface under the machine helps
keep it level. A level machine has fewer malfunctions. Provide ample space
around the machine. Open space around the machine allows for easier access.
Insert all bolts in the same direction. For aesthetic purposes, insert all
bolts in the same direction unless specified (in text or illustrations) to do
otherwise. Leave room for adjustments. Tighten fasteners such as bolts, nuts,
and screws so the unit is stable, but leave room for adjustments. Do not fully
tighten fasteners until instructed in the assembly steps to do so. Fill out
and mail the warranty card.
Assembly Tips
Read all “Notes” on each page before beginning each step. While you may be
able to assemble the GAR75 using the illustrations only, important safety
notes and other tips are included in the text. Some pieces may have extra
holes that you will not use. Use only those holes indicated in the
instructions and illustrations.
NOTE: With so many assembled parts, proper alignment and adjustment are
critical. While tightening the nuts and bolts, be sure to leave room for
adjustments.
NOTE: The bottles that are marked “Poison” are your touch-up paint. Keep
away from children.
CAUTION: Obtain assistance! If you feel like you can’t assemble the GAR75
by yourself then do not attempt to do so as this could result in injury.
Review the installation requirements before proceeding with the following
steps.
Body-Solid continually seeks ways to improve the performance, specifications and product manuals to ensure that only superior products are released from our factories. Please take the time to carefully read through this manual thoroughly. Instructions contained in this document are not intended to cover all details or variations possible with Body-Solid equipment or to cover every contingency that may be met in conjunction with the installation, operation, maintenance or troubleshooting of the equipment. Even though we have prepared this manual with extreme care, neither the publisher nor the author can accept responsibility for any errors in, or omission from, the information given. Should additional information be required, or should situations arise that are not covered by this manual, the matter should be directed to your local Body- Solid representative or the Service Department at Body-Solid Inc. in Forest Park, Illinois.
GAR75 Hardware Illustration
Part# Qty Description
STEP 1
Be careful to assemble all components in the sequence they are presented.
NOTE
Wrench-tighten ALL hardware at the end of STEP 1B. Some components may be pre-
assembled. Nylon lock nuts will not fully screw onto bolts, they must be
wrench tightened to fully go on.
Attach Bottom Tray (A) to Uprights (C, D, E) using
- 5 – (#1) M8x45mm Socket Head Cap Screw
- 5 – (#2) M8 Flat Washer
- 5 – (#3) M8 Barrel Nut
- 1B. Attach three Trays (B) to Uprights (C, D, E) using:
- 15 – (#1) M8x45mm Socket Head Cap Screw
- 15 – (#2) M8 Flat Washer
- 15 – (#3) M8 Barrel Nut
STEP 2
Be careful to assemble all components in the sequence they are presented.
NOTE
Wrench-tighten ALL hardware at the end of STEP 2A. Some components may be pre-
assembled. Nylon lock nuts will not fully screw onto bolts, they must be
wrench tightened to fully go on.
Attach four Hooks (F) to Uprights (C, E) using
- 4 – (#1) M8x45mm Socket Head Cap Screw
- 4 – (#2) M8 Flat Washer
- 4 – (#3) M8 Barrel Nut
**GAR75 Exploded View
**
900 S. Des Plaines Ave.
Forest Park, IL 60130
Phone:(708)427-3555
Fax:(708)427-3556
Hours: M-F 8:30 – 5:00 CST
www.bodysolid.com
Copyright 2009. Body-Solid. All rights reserved. Body-Solid reserves the right to change design and specifications when we feel it will improve the product. Body-solid machines maintain several patented and patent-pending features and designs. All rights reserved on all design patents and utility patents.