YESOUL WB1 Weight Bench Installation Guide

WB1
YESOUL Weight Bench
Before using this product,
care fully read and properly keep this manual. Product model: YS-WB1
Item NO.: WB1
YESOUL Weight Bench
WB1 Product Manual

Specifications

Installation diagram

1, pallet pad(1)
2, pallet support (1)
3, cushion (1)
4, dumbbell rack (1)
5, foam tube (2)
6, front bracket (1)
7, the front bottom tube (1)
8, carriage bolt M860，flat washer with cover nut (2)
9, cotton，pipe plugs (6)
10, Mei twist M10100 (1)
11, hexagonal bolt M1070 flat washer，nut (1)
12, hexagonal bolt M1070 flat washer，nut (5)
13, seat cushion (1)
14, crosshead bolt M614 (8)| 15, connecting pieces (2)
16, bolt Ø1070(3)
17, hexagonal bolt M10140, flat washer，locknut (1)
18, the lower main frame (1)
19, hexagonal bolt M816 (3)
20, sliding seat (1)
21, pull the M16 (2)
22, backrest (1)
23, backrest fixed tube (2)
24, phillips head bolt M6*40 (4)
25, support frame (1)
26, inner hexagon cross wrench 5# (1)
27, wrench 14- 17mm (2)
28, the bottom tube (1)
---|---

Installation steps

Step 1
Front bracket (6) and front bottom tube (7) Use carriage bolt M8*60, flat washer, with cover nut (8) Connection fixed

Step 2
Place the seat cushion (13) and the front bracket (6), Bolt M1070, flat washer, nut (12), and the front bracket (1), Bolt M1070, flat washer, nut (11) Connection fixed
Insert pin Ø10*70(16)

Step 3
Seat frame (13) and lower main frame (18), connecting piece (15)
Use hexagon bolts M1070，flat washers, nuts (12) Connection fixed
Insert pin Ø1070(16)

Step 4

1. First put the sliding seat (20) into the lower main frame (18) Twist the pin M16 (21) hole position is good
2. Use the bolt M8*16 (19) for the rear bottom tube (28) and the lower main frame (18)
   Connection fixed

Step 5
Support frame (25) and sliding seat (20)
Bolt M10*70, flat washer, nut (12)
Connection fixed

Step 6
The backrest fixed tube (23) and the lower main frame (18), the support frame (25) Bolt M10*140,flat washer,locknut(17) Connection fixed

Step 7

1. The seat cushion (3) and the cushion frame (13) with bolts M6*14 (14)
2. The backrest (22) and the backrest fixed pipe (23) With bolts M6*40 (24)
   Connection fixed

Step 8
Pallet pad (1) and pallet (2)
With bolt M6*14 (14)
Connection fixed

Step 9
Insert the pallet (2) into the front bracket (6)
Let pull pin M16 (21) to the hole

Step 10

1. The dumbbell frame (4) and the front bracket (6)
   Bolt M10*65, flat washer, nut (12) Connection fixed

2. Use the twisted M10*100 (10) through the front bracket (6)
   Fixed dumbbell rack (4)

Step 11

1. Insert the foam tube (5) into the dumbbell rack (4)
2. insert foam, pipe plug (9) into the foam frame (5)

Make sure you check sgain for safety.
Is the bolt botl in place?
The installstion is complete

Safety knowledge

1. Before assembling and using the trainng equipment，it is very important to read carefuly all the contents of the instruction manual.Only the correct installation，mainenance and use of the trainng equipment can achieve a safe and effective training effect .It is importantt to ensure that all users are familiar with all the warnings and precautions of the trainng equipment.
2. Before using the training equipment,the user should consult a doctor acording to his own physical condition to prevent health or safety accdients during the training process so that normal training can not be carried out.If fhe user is undergoing medication and the treatment afects heart rate, blood pressure,and cholestero lindicators, be sure to follow the doctor’s advice before training.
3. Be aware of your physical condition at all times.Incorrect or excessive training can be detrimental to your health .If you have the followng symptoms(including headache,chest,irregular heartbeat, shortness of breath, dizziness,nausea etc.) ,please stop  training immediately and continue training only after the doctor has checked and confrmed that there is no problem.
4. Keep your children and pets away from this training equipment whihch is available for adults only.
5. Please place the training equipment in a solid, flat place,and place a protectvie layer on the floor and carpet surface to prevent ground damage. For your safety please ensure that the distance between the perimeter of the training equipment and each  obstacle is not less than 0.5M.
6. Before using the training equipment，please check that al l screws and nuts that need to be locked are locked to ensure that they can be used later.
7. The safe use of the training equipment can only be ensured by frequent repair and maintenance of areas that are prone to damage ,wear and breakage.
8. Please ensure that the equipment is used in the manner specifed in the manual.When defective parts are found during assembly and repair，or noise is e mitted during use，please stop operation and use immediately.Ensure that all dlirectionsare resolved before proceeding.
9. When using the training equip ment, wear suitable training clothes and avoid wearing large clothes. Large clothes may be stuck by the machine,hinder operation and may be trapped on the equipment and can not be moved.
10. The training equipment is not suitable for medical equipment.
11. Be careful not to hurt your backwhile lifting or moving the training equipment .Use the correct method of movement,or with the assistance of others.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>