YESOUL MP1 Mini Bike User Manual
- June 14, 2024
- YESOUL
Table of Contents
MP1
YESOUL MINI BIKE
Before using this product,
carefully read and
properly keep this manual.
Product model: YS-CMP1
Item NO. :MP1
YESOUL MINI BIKE
MP1 Product Manual
SPECIFICATIONS
Product Name | YESOUL MINI BIKE MP1 |
---|---|
Product Model | YS-CMPI |
Item No. | MP1 |
Net Weight | 8.6kg |
Gross Weight | 10kg |
Maximum Weight Capacity | 120kg |
Carton size | 570mmx320mmx240mm |
Product Size | 645mmx420mmx310mm |
Power supply | 1×1.5 V AAA |
Supporting software version | iOS 9.0 or higher, Android 5.0 or higher |
Sensing system connection | Bluetooth |
PRECAUTIONS
Failure to observe these warnings could result in physical injury or damage to the device.
- Use the device indoors on a level surface. Keep the device away from moisture and dust.
- Make sure that the pedals are on tight. Loose pedals will slowly come undone. Using the bike with loose pedals can damage the threads on the crank arms.
- The device has sealed bearings and is maintenance free. Lubricants are not necessary and can actually damage the bike.
- Do not place the bike in a location where it will be in contact with direct sunlight or where it will be exposed to high temperatures or excessive humidity.
- Do not stand on the pedals. The device was not designed to be used while standing.
- The exerciser won’t come with batteries, please purchase one batteries by yourself. (The battery model: AAA( NO.7) battery 1.5V *1)
LIST OF SPARE PARTS
NO. | Description | Quantity |
---|---|---|
1 | Main body | 1 |
2 | Rear stabilizer | 1 |
3 | Front stabilizer | 1 |
4 | Right pedal | 1 |
5 | Left pedal | 1 |
6 | Display | 1 |
7 | Screw | 4 |
8 | Spanner | 1 |
Step 1
Assemble the rear stabilizer (2) with main body (1) by screw (7) and
spanner(8).
Step 2
Assamble the front stabilizer (3) with the main body(1) by screw(7) and
spanner(8).
Step 3
When installing Parts 4 and part5, Please use the spanner to turn the pedals
in the same direction.
Note: The pedals must be locked.
Safety tips:
Reverse riding is not recommended, as it is likely to loosen pedals.
After reverse riding, check whether the pedals are locked, in order to avoid
safety issues arising from loose pedals.
Step 4
Connect the electronic watch as shown in the figure on the right and then
connect the induction wires.
Step 5
If you need to replace the battery, please open the battery cover, take out
the old battery, and then insert a new battery into the battery slot.
DISPLAY INSTRUCTION
The Function Button
MODE
(Press this key to select and lock the specific functions required. Long press
this key for 4 seconds to clear all readings.)
RESET
(Press this key to reset the target value.)
SCAN
(Display all functional readings in turn)| TIME
(Total time pedaled)
SPD
(Kilometers per hour)
DIST
(Total distance pedaled, in miles)
CAL
(Total calories burned)
---|---
SCAN:
Press the MODE key until the pointer points to SCAN and flashes, automatically
displaying all functional readings in turn.
TIME:
Display the current movement time, which can be timed forward, or countdown
(when setting thetarget value, which can be counted down). Display range:
00:00 — 99:59 minutes: seconds.
SPD:
Display current speed display range: 0.0-999. 9 km/h.
DIST:
Display the current moving distance, which can be accumulated or accumulated
backwards (when setting the target value, it can be accumulated backwards).
Display range: 0-99.99km.
ODO :
The total distance which this function is refers to from battery capacity
period runs.
CAL:
Show that the energy consumed by the current exercise can be accumulated
positively or backwards (when setting the target value, this CALORIE can be
accumulated backwards).
The range of this CA LORIE is 0-999. 9 kcal.
REMARK
- When the movement stops and there is no button operation within4 minutes, the display will automatically close.
- When pedal exerciser has a sense of exercise or press any key, the electronic watch will automatically open.
- If this is the first time to use, and the display shows any abnormality, please reinstall the battery.
- If this is the first time to use, and the electronic table does not function to display, please reconnect the lines.
- This display is applicable to AAA( NO.7) battery 1.5V *1. If after a long time of use, the electronic table display brightness from strong to weak, or no display, please replace the new battery in time
Adjustable Tension Control
Magnetic resistance system makes pedal motion smooth and quiet. Level 8 tension can be adjusted from low to high to meet the requirements of different intensity of exercise.
- Warm up:1,2
- Rehabilitation exercise:3,4
- Improve endurance:5,6
- Stabilizing muscle:7,8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>