suptek TS001-02 Universal TV Stand Instruction Manual

suptek TS001-02 Universal TV Stand

Product Information

Specifications

• Model Number: TS001-02
• Email: after-sales@suptekmount.com

Product Usage Instructions

Step 1: Attaching the Vertical Pole and TV Plate

1. Take the vertical pole and attach the vertical pole protection buckle by inserting it into the vertical pole.
2. Tighten the screw to secure the buckle in place.
3. Connect the TV plate to the support column.

Step 2: Attaching the Vertical Pole Protection Buckle & Cable Management

1. Insert the buckle into the vertical pole.
2. Tighten the screw to secure the buckle in place.
3. Use the cable management system to organize and hide cables.

Step 3: Connecting the Support Column to Tempered Glass

1. Connect the support column to the tempered glass.

Step 4: Mounting the Monitor Brackets to a TV

1. Determine the diameter of the bolt required by your TV.
2. Thread the bolt into the TV using the correct washer (I).
3. Use spacers (G, H) if necessary.
4. Ensure that the monitor brackets are vertically centered and level with each other.

Frequently Asked Questions (FAQ)

• Q: How do I attach the vertical pole and TV plate?
  A: Follow Step 1 in the user manual to attach the vertical pole and TV plate.

• Q: How do I use the cable management system?
  A: Follow Step 2 in the user manual to use the cable management system.

• Q: How do I connect the support column to the tempered glass?
  A: Follow Step 3 in the user manual to connect the support column to the tempered glass.

• Q: How do I mount the monitor brackets to a TV?
  A: Follow Step 4 in the user manual to mount the monitor brackets to a TV.

UNPACKING INSTRUCTIONS

• Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
• Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts.
• Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before beginning the installation, and carefully follow all instructions contained herein. Use proper safety equipment during installation. Please call a qualified installation contractor for help if you:

• If you don’t understand these directions or have any doubts about the safety of the installation.
• If you are uncertain about the nature of your wall, consult a qualified installation contractor.

Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Supplied part list 1

Supplied part list 2

Parts

1. step1 Connecting the Support Column to Temperped Glass

2. Step 2 Connecting the TV Plate to Support Column

3. Step 3 Mounting The Monitor Brackets to a TV
   First of all, make sure the diameter of the Bolt(B to F) your TV requires. Once you have determined the correct diameter, please see the diagram as below. You will thread the Bolt into the TV by using the correct Washer(I), and using the spacer(G,H) if necessary. Please make sure the Monitor Brackets are vertically centered and level with each other.

4. Step  4 Attaching the vertical pole and TV plate

5. Step 5 Attaching the vertical pole protection buckle&cable management

after-sales@suptekmount.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>