KODAK QY-WPMV Wifi Photo Frame User Manual
- June 15, 2024
- Kodak
Table of Contents
KODAK QY-WPMV Wifi Photo Frame
Product Information
Specifications:
- Compliance: Part 15 of the FCC Rules
- Interference: Must not cause harmful interference
- Interference Acceptance: Must accept any interference received
- RF Radiation Exposure Limits: Complies with FCC limits
- Minimum Distance: 20cm between radiator and body
Product Usage Instructions
-
Reorient or Relocate the Receiving Antenna:
If you are experiencing interference or poor signal reception, try reorienting or relocating the receiving antenna. Experiment with different angles and positions to find the best signal strength. -
Increase the Separation between the Equipment and Receiver:
If you notice interference or performance issues, increase the distance between the equipment and receiver. Ensure there are no obstructions or other devices causing interference in close proximity. -
Connect the Equipment into a Different Circuit:
To minimize interference from the power source, connect the equipment into an outlet on a circuit different from the one to which the receiver is connected. This can help reduce electrical noise and improve overall performance. -
Consult the Dealer or Technician:
If you have followed the previous steps and are still experiencing difficulties, it is recommended to consult the dealer or an experienced radio/TV technician for further assistance. They can provide specialized guidance based on your specific setup and environment.
Frequently Asked Questions (FAQ)
-
Q: What does it mean that this device complies with part 15 of the FCC Rules?
A: Compliance with part 15 of the FCC Rules ensures that the device operates within the defined limits for radio frequency emissions. It must not cause harmful interference to other devices and must accept any interference received. -
Q: What should be the minimum distance between the radiator and my body?
A: It is recommended to maintain a minimum distance of 20cm between the radiator (source of RF radiation) and any part of your body. This helps minimize potential health risks associated with prolonged exposure to RF radiation.
- The Kodak trademark, logo and trade dress are used under license from Kodak. ©2023 Maxtalent Industrial Limited. All rights reserved,
- All information contained in this document is subject to change without notice
- Made In China FC IC CE RoHS
Technical Support
If you need further assistance, please contact the support department
- E-mail: support@maxtdigital.com
- Web: www.maxtdigital.com/kodak
- All information contained in this document is subject to change without notice.
Radio and TV Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warranty
Maxtalent warrants this product against defect in material or workmanship for
1 YEAR from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or
“warranty void” sticker has been removed or altered on the product.
This warranty does not cover:
- Cosmetic damage or damage due to acts of God.
- Accident misuse, abuse, negligence or modification of any part of the product.
- Damage due to improper operation or maintenance, connection to improper equipment or attempted repair by anyone other than Maxtalent or appointed.
- Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL MAXTALENT LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT INDIRECT, SPECIAL, INCIDENTAi OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT’S ACCOMPANYING SOFTWARE, OR IT’S DOCUMENTATION
- Maxtalent makes no warranty or representation, expressed, implied, or statutory, with respect to products, contents or use of this documentation and all accompanying software, and specifically disclaims it’s quality, performance, merchantability, or fitness for any particular purpose
- For more information, please visit:
- All information contained in this document is subject to change without notice.
- version : V2.0
Getting Started Guide (GSG)
-
Step: 1: Connect power Supply
The Product will be on automatically after connecting the power connector to the DC port on the device. -
Step 2: Set the Product according tic guide
After the Product displays startup p animation, follow the activation wizard to start setting. -
Select language;
-
Select time zone;
-
Select available WIR and enter the pa99WOrd for connection;
Note: WIFl Is required for some functlor.s of the Product please connect WIFl first.
Download APP
Search “KODAK Dig Ital Frame· from Apple APP store and Google Play to download
APP, Open the APP and sign up a new account. Log In directly, If you’ve
already had one.
Frame Binding
Open Frame Settings – User Account interlace, turn on KODAK Digital Frame APP
on your mobile phone, seen the QR code on the Product or enter the Product No.
to bind the Product (the Product No. will be displayed after connecting WIFI
successfully). Upload phots, muslin and videos to the Product after successful
binding
Upload
- Click “Upload” button and select “Camera” to take a new photo or select “Photo” to select the phone (s) you want to send from your local album.
- Selecting the photos to be uploaded, click the lower right corner of the “Finish” button, and then crop the photos, add labels and other editing, and then click the upper right corner of the “Next”, select the frame and click “Upload”, send photos to the designated frame. Photos can be sent up to 10 at a time, videos can be sent up to 15 seconds, and music can be sent up to 10 songs at a time. This photo frame can be uploaded via mobile phone APP, email. and can also read files from an external SD card or USB stick, or connect to a computer to cop files using the data cable in the accessory. The files in the computer can be grouped or named according to your preference and then copied to the photo frame or SD card or U disk. There is no limit to the number of photos and video playback time.
How to Use KODAK Digital Frame
-
Main Interface See the main menu below. Access different functions by touching the icons on the panel.
The menu includes Album, Music, Video, Calendar, Weather and Setup.
Note: Battery icon is displayed in the upper right corner of the main interface of RWF-108H/ RWF-109 -
Album
Click the “Album” icon on the main interface to turn on the album, where you can upload photos from users or import them locally. Photos uploaded by users can be grouped so that they could easily find photos of each family member from “User Uploads”. All photos in the group can be sorted based on reverse chronological order or by file name.
Note: -
Local import includes photos downloaded to the Product through computer copy and USE flash disk in SD card;
-
“Reverse chronological order” means sorting photos from latest to earliest shooting time. File name order means sorting photos in the order of letters, numbers and Chinese characters contained in the name of these photos;
-
The word “NEW” in the upper right corner of photo means that the photo has not been viewed after being uploaded to the Product but will disappear after viewing the phone by clicking “Open”.
-
In “Editing”, you can copy or move photos locally from the Product to an SD card or USB flash disk, download photos from an SD card or USB flash disk to the Product, or delete photos.
-
By selecting and clicking a photo in any group, you can view or set such photo. Photo settings include “Play All”, “Crop”, “Rotate”, “Delete”, “Infor”, “More Settings”, etc.
Play All — The slideshow plays all photos in the group that contains the current photo.
Crop — Move the box and crop it to the size needed.
Rotate — Rotate the current photo to the left or right.
Delete — Delete the current photo (s).
Infor — Display information of the current photo (name, revision time and storage path)
More Settings — Turn on or off BGM, Calendar Display, select label display time, switching time of slideshow, switch display mode, play effect, etc. -
Music
Click on the “Music” icon on the main interface to enable the music function. In the music function interface, music files are displayed by group based on local music, SD card and USB flash disk. -
Local music includes music copied from computer, downloaded from SD card and USB flash disk, and uploaded to the Product by mobile APP.
-
Click the folder under the music file group to open it, and then click the intended music file to play.
-
Switch the loop mode, last song, pause, next song, volume adjustment, etc. on music play interface.
-
Click the “Back” button in the upper left corner to minimize the play page to the bottom of the main interface of music player.
-
In “Editing” interface, copy or move music locally from the Product to SD card or USB flash disk, download music from an SD card or USB flash disk to the Product, or delete music.
-
Video
Click the “Video” icon on the main interface to enable video function. On the video function interface, video files are displayed in groups based on local videos, SD card and USB flash disk. Local video is displayed in groups based on user upload and local import. Note: Local import includes videos downloaded to the Product via computer copy, SD card and USB flash drive. -
Click the folder in the group containing the video to open it, and then click the intended video to play.
-
The word “NEW” in the upper right corner of video means that the video uploaded to the Product has not been viewed and will disappear after clicking the video.
-
On the video play interface, switch last video, play or pause, or next video, select the display mode, adjust volume, switch the loop mode, etc.
-
In “Editing”, copy or move videos locally from the Product to SD card or USB flash disk, download videos locally from SD card or USB flash disk to the Product, or delete videos.
-
Calendar
Click the “Calendar” icon on the main interface to open it. Click the left and right arrows at the right top to switch months, and click “Today” icon at the right of the right arrow to return to the current date. Click the “Album/Clock” icon at the top of the left side to switch the photo carousel or clock on the left side of the calendar interface. -
Clock
Click the “Time” icon in the upper right corner of the main interface to enter settings of “Time Zone”. Set the date, time, time zone, time format, or select automatic date and time. -
Weather
Click the “Weather’ icon on the main interface or the weather data icon in the upper right corner to enter the weather forecast page. After connecting Wifi, the weather forecast will display weather of the city for three days automatically through the WiFi IP address. Click the “Refresh” icon or “Search” icon in the upper right corner to refresh the weather data or add or switch weather for other cities. Click the “C/ “F” icon to switch temperature units. -
Setup
There’re many options in the Setup menu, which can be used to customize the way of how to operate your KODAK Digital Frame. Click the setting item icon or slide the setting page to switch setting items, which include “User Account”, “WIFI”, “Customization”, “Alarm Clock’. “Time Zone”, “Upload Photos from “Storage Space”, “About”, etc.
User Account: Display the bound QR code of the Product or device code and User List. Wi-Fi: Enable/disable or replace WiFi connection.
Customization: Set the language, screen saver time, screen saver type, display mode, play time interval, play effect, startup auto-play type, timing sleep time, brightness, volume and whether to add new photos to carousel to automatically.
Note: Timing sleep is set according to “time”; time of entering the automatic sleep follows the screen saver time. If the screen saver time is set as “1 min after inactivity”, the Product will enter the sleep state 1 min after the scheduled sleep time expires. If the screen saver time is set as “never”, timed sleep will not enter sleep state
Alarm Clock: Add and set the alarm clock time.
Time Zone : Set date, time, time zone and time format.
Photo Transmission: Transmit photos to the Product via email addresses on the Product.
Mailboxes supported at present:- @Outlook.com/@iCloud.com/@Proton.me/@hotmail.com/@163.com/@qq.com/@gmail.com/@126.com/@sina.com/@aliyun.com
- Storage Space: Display the space data (used/available) of internal storage, cloud transmission traffic, SD card and USB flash drive.
- Note: Cloud traffic refers to total traffic charged by the server vendor for downloading photos from the server to the Product. The Product provides 10GB cloud traffic free of charge. Users could purchase more via designated channels (APP) after using it up. and trainee system ride or store the actor seen the Products name, update hardware
- Note: All user data on the Product will be cleared after choosing and executing “Clear All Data”
Common faults and troubleshooting
- For more help, please feel free to contact our technical department.
- E-mail: support@maxtdigital.com
- Website: www.maxtdigital.com/kodak
- This document is subject to change without a prior notice.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
FCC WARNINGS
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>