REGIOLUX SRG-1500 Device Mounts Instructions

: June 15, 2024
: REGIOLUX

Table of Contents

REGIOLUX SRG-1500 Device Mounts
Product Information
Product Usage Instructions
Power
Installation Instructions
Safety Information
Information for service
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

REGIOLUX SRG-1500 Device Mounts

REGIOLUX-SRG-1500-Device-Mounts-PRODUCT

Product Information

Specifications

Model: SRG/1500 SRGS/1500
Power Consumption: 29W (OFF-OFF), 36W (OFF-ON), 43W (ON-OFF), 51W (ON-ON)
Luminous Flux: ~4800 lm (OFF-OFF), ~5900 lm (OFF-ON), ~7000 lm (ON-OFF), ~8100 lm (ON-ON)
IP Rating: IP40 (SRTES + SRG + SRBAS), IP54 (SRTES + SRGS + SRBAS), IP40 (SRTES + SRG + SRBKS), IP54 (SRTES + SRGS + SRBKS), IP20 (SRTE + SRG / SRGS + SRBAS), IP20 (SRTE + SRG / SRGS + SRBKS), IP20 (SRTES + SRG / SRGS + SRBA), IP20 (SRTES + SRG / SRGS + SRBK)
Art.-Nr.: 532510 – 04/20
Max. Mounting Height: 1mm

Product Usage Instructions

Safety Information

Before using the product, please read and understand the safety information provided below:

Only qualified electricians should install and operate this product.
There is a danger of electric shock if the product is not properly installed and used according to the instructions.
Always comply with applicable safety and accident prevention regulations and standards.
Do not modify or tamper with the product as it can negatively impact its technical properties and potentially cause damage.
Avoid direct contact with acids, bases, solvents, volatile organic compounds, and oils as they can damage the product.
Ensure sufficient ventilation to prevent damage from gas release.
Use standard cables suitable for the power supply voltage.

Operation of the Luminaire

Follow these instructions for the proper operation of the luminaire:

Inspect the LEDs regularly and replace any defective luminaires.
Do not attempt to replace or exchange the LED modules yourself. Contact a qualified technician for any replacements or repairs.
Exchanging or replacing the LED modules without proper knowledge and expertise can reduce the lifespan of the luminaire and even lead to total failure.
Ensure that the luminaire is operated within the specified IP rating to maintain its safety and performance.

FAQ

Q: Can I install and operate this product myself?
- A: No, only qualified electricians should install and operate this product.
Q: Can I replace the LED modules myself?
- A: No, it is recommended to contact a qualified technician for any LED module replacements or repairs.
Q: What should I do if the luminaire is not functioning properly?
- A: If you experience any issues with the luminaire, contact a qualified technician for troubleshooting and repairs.
Q: Can I modify or tamper with the product?
- A: No, modifying or tampering with the product can negatively impact its technical properties and may cause damage.

Power

Attention

Don’t open the luminare!
Loss of Guarantee!

Installation Instructions

REGIOLUX-SRG-1500-Device-Mounts-FIG-4 REGIOLUX-
SRG-1500-Device-Mounts-FIG-5

SRTES + SRG + SRBAS = IP40 !
SRTES + SRG + SRBKS = IP40 !
SRTES + SRGS + SRBAS = IP54 !
SRTES + SRGS + SRBKS = IP54 !
SRTE + SRG / SRGS + SRBAS = IP20 !
SRTE + SRG / SRGS + SRBKS = IP20 !
SRTES + SRG / SRGS + SRBA = IP20 !
SRTES + SRG / SRGS + SRBK = IP20 !

Art.-Nr.: 532510 – 04/20

Safety Information

General Safety Information

Installation, commissioning and maintenance only by qualified electrician.
Never perform any work on the luminaire with voltage applied. Danger to life due to electric shock!
Electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
Damaged luminaires must not be operated.
Observe and retain safety instructions and mounting instructions
No liability is accepted for damages resulting from improper use.
Use genuine parts only for repair.
Ensure stability of the ceiling and fastening elements.
The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C, unless otherwise described by labeling the luminaire.

Operation of the luminaire

Abnormal dark spots may be an indication of partial failure of LEDs. Inspect regularly and replace the luminaires affected. The light source (LED) of this luminaire must not be exchanged or replaced by the user.
Exceeding the permissible ambient temperature will reduce the luminaire’s lifecycle, resulting in premature failure in extreme cases.
Avoid condensation of the luminaire.
Any mechanical load to the LED circuit boards is not permitted.
LEDs can be damaged by electrostatic discharge (ESD). This may result in total failure. Always avoid direct contact.
Depending on their concentration, chemicals can corrode the LED modules and lead to reduction of luminous flux, drift of luminous colour and/or total failure. Always avoid direct contact with acids, bases, solvents, volatile organic compounds and/or oils.
Ensure sufficient ventilation to prevent damage by gas release.
Avoid ESD problems by not routing feed-through wiring directly along the wiring of the luminaire.
Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.

Changes to our products

Modification, reworking, re-marking of products can have a negative impact on their technical properties, destroy them and possibly cause consequential damage to other objects. The manufacturer cannot be held responsible for damage caused by such changes.