REGIOLUX 3764 Ridium IX Spark Plug Instructions

REGIOLUX 3764 Ridium IX Spark Plug

Product Information

Specifications

• Product Name: LED
• Art-Nr: 532348-04/19
• d+ IP5x – dust nonconductive
• d+ IP6x – dust conductive and dust nonconductive

Product Usage Instructions

Safety Information
Manipulation of our products is not permitted. Modifications, reworking, re-labelling of products as well as their package is not permitted and infringes, amongst others, our registered trademark rights. Such modifications may affect technical properties of our products, damage them and possibly cause consequential damage to other objects. The manufacturer shall not be responsible under any circumstances for damage caused by such modifications.

Installation and Maintenance

• The safety of the product is guaranteed only if the installation and maintenance are carried out correctly and the lamp is used appropriately. Modifying the lamp or using it inappropriately puts oneself at risk of electric shocks, short circuits, and fires.
• The installation and maintenance should only be performed by a qualified electrician.
• It is important to follow all national and international safety and accident prevention regulations and guidelines when installing and using the lamp.

Product Care

• Follow the manufacturer’s instructions on how to use and store the lamp properly.
• Avoid making any modifications to the lamp or using it inappropriately.

FAQ

• Q: Can I modify the product?
  A: No, modifications to the product are not permitted. Modifying the product may affect its technical properties, damage it, and potentially cause damage to other objects. The manufacturer is not responsible for any damages caused by modifications.

• Q: Can I install and maintain the lamp myself?
  A: It is recommended to have a qualified electrician perform the installation and maintenance of the lamp to ensure safety.

Regiolux GmbH Hellinger Sir. 3
D-97486 Konigsberg/Bay.
T 09525 89-0
http://www.regiolux.de  info@regiolux.de

Dimensions

Safety Information

General Safety Information

• Installation, commissioning and maintenance only by qualified electrician.
• Never perform any work on the luminaire with voltage applied. Danger to life due to electric shock!
• Electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
• Damaged luminaires must not be operated.
• Observe and retain safety instructions and mounting instructions
• No liability is accepted for damages resulting from improper use.
• Use genuine parts only for repair.
• Ensure stability of the ceiling and fastening elements.
• The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C, unless other-wise described by labeling the luminaire.

Operation of the luminaire

• Abnormal dark spots may be an indication of partial failure of LEDs. Inspect regularly and replace the luminaires affected. The light source (LED) of this luminaire must not be exchanged or replaced by the user.
• Exceeding the permissible ambient temperature will reduce the luminaire’s lifecycle, resulting in premature failure in extreme cases.
• Avoid condensation of the luminaire.
• Any mechanical load to the LED circuit boards is not permitted.
• LEDs can be damaged by electrostatic discharge (ESD). This may result in total failure. Always avoid direct contact.
• Depending on their concentration, chemicals can corrode the LED modules and lead to reduction of luminous flux, drift of luminous colour and/or total failure. Always avoid direct contact with acids, bases, solvents, volatile organic compounds and/or oils. Ensure sufficient ventilation to prevent damage by gas release.
• Avoid ESD problems by not routing feed-through wiring directly along the wiring of the luminaire.
• Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.

Manipulation of our products is not permitted

• Modifications, reworking, re-labelling of products as well as their package is not permitted and infringes, amongst others, our registered trademark rights. Such modifications may affect technical properties of our products, damage them and possibly cause consequential damage to other objects. The manufacturer shall not be responsible under any circumstances for damage caused by such modifications.
  • + IP5x – dust nonconductive
  • + IP6x – dust conductive and dust nonconductive

Information for service, cleaning and disposal of luminaire

Instruction for end of life:

Instruction for luminaire cleaning

Safety Information

General Safety Information

• Mounting, commissioning and maintenance only by a skilled electrician.
• Safety of the luminaire is only guaranteed in case of proper installation and maintenance and proper use according to intentions. In case of modification of the luminaire or improper use, there is mortal danger and fi re hazard due to electric shock or short circuit.
• Electrical connection must be carried out correctly and in accordance with all valid standards and other national and international safety and accident prevention regulations.
• Installation instructions must be stored and in any case read before using the luminaire.
• Loss of liability of manufacturer due to subsequent modifications to luminaires or their improper use.
• No liability due to damage from improper use.
• Use only original parts during repairs and maintenance.
• Only use lamps approved according to the identification plate.
• Ensure load capacity of ceiling and mounting elements.
• Luminaire only suitable for indoor applications and ambient temperature of up to 25°C.

Luminaire operation

• With multi-lamp luminaire, align cool spots of lamps (= position of imprint) in one direction.
• With vertical wall mounting, align cool spots of lamps (= position of imprint) downwards.
• Specifications of the luminaire manufacturer must be observed.
• Carry out relamping immediately after end of service life.
• Eliminate overvoltage to electronic ballasts caused by e.g. unbalanced load.
• Do not deactivate lamps by rotating these in their sockets but switch off luminaire.
• To avoid EMC problems, do not route through-wiring directly along luminaire wiring.
• Connect control inputs of dimmable luminaires with standard cables suitable for mains voltage.

Operation of dimmable luminaire

With lamps in dimmable luminaires, initially burn in at 100%100h.

• Subject to technical changes.
• All manipulations to our products as well as their packaging, such as for example modifications, adaptations and resignations, are impermissible and breach registered copyright and trademark rights among others. Such modifications may negatively influence the technical properties of our products, destroy them and possibly cause secondary damage to other objects. The manufacturer can in no case be held responsible for damages caused by such modifications.
  • + IP5x – dust nonconductive
  • + IP6x – dust conductive and dust nonconductive
• Information for service, cleaning and disposal of luminaire
• Instruction for luminaire cleaning
• Instruction for end of life and components disposal:

Documents / Resources

| REGIOLUX 3764 Ridium IX Spark Plug [pdf] Instructions
3764 Ridium IX Spark Plug, 3764, Ridium IX Spark Plug, IX Spark Plug, Spark Plug, Plug
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>