PIXAPRO Curved Reflector Studio Photography Light Diffuser Instruction Manual
- June 12, 2024
- PiXAPRO
Table of Contents
PIXAPRO Curved Reflector Studio Photography Light Diffuser
FRAME PARTS
- A: Centre Frame Poles (x2)
- B: End Frame Pole with Wing Nuts (x4)
- C: Connecting Rods (x2)
- D: Stand Bracket (x1)
INSTALLATION INSTRUCTION
Step 1
- Take the Centre Frame Pole (A) and connect one of the End Frame poles (B) to each end to form the main outer frame of the curved reflector.
Step 2
- Now that Poles A and B are now all connected together, now feed the pole through the fabric on the long side of the reflector fabric (with the pole curving upwards, and the black side of the fabric facing downwards as shown.
Step 3
- Now take the Connecting Rods (C) an remove the wing nuts from either end as shown
Step 4
- Once the Wing Nuts have been removed from each end of the Connecting Rods (C), feed the rods through the fabric on the short side of the reflector fabric as Show.
Step 5
Now that the connecting rods have been inserted into the short end of the reflector fabric, feed the screw thread at each end of the connecting rod, into the hole at the end of the end Frame Poles (B). Now use the wing nuts you removed earlier from the connecting rods (C) to secure the connecting rids to the main from of the reflector. (Repeat the process for all four corners of the frame)
Step 6
- Once all of the rods and the poles have been connected together with, turn the entire assembly upside-down as shown ready to ad the Stand Bracket (D)
Step 7
- Now get the Stand bracket (D), remove the wing-nuts then feed the threaded bolts on the stand bracket, feed each one through the hole in the centre of the main frame of the reflector as shown. Replace the Wing nuts to secure the main frame to the stand mount.
Complete The Set Up
The Curved Reflector is now complete and is ready for use. Simply mount it on top of any standard light stand and start shooting.
- Light Stand is NOT included.
PIXAPRO LTD.
Unit 5 Sterling Park, Pedmore Road, Brierley Hill, West Midlands DY5 1TB Tel:
+44 (0)121 552 3113 Email:
info@essentialphoto.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>