REGIOLUX SRGD-DALI 1500 Surface Mounted Luminaires Light Instruction Manual
- June 15, 2024
- REGIOLUX
Table of Contents
REGIOLUX SRGD-DALI 1500 Surface Mounted Luminaires Light Instruction
Manual
INSTRUCTION SRGD-DALI 1500
Safety Information
General Safety Information
- Installation, commissioning and maintenance only by qualified electrician.
- Never perform any work on the luminaire with voltage Danger to life due to electric shock!
- Electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention
- Damaged luminaires must not be
- Observe and retain safety instructions and mounting instructions
- No liability is accepted for damages resulting from improper
- Use genuine parts only for
- Ensure stability of the ceiling and fastening
- The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C, unless other- wise described by labeling the
Operation of the luminaire
- Abnormal dark spots may be an indication of partial failure of Inspect regularly and replace the luminaires af- fected. The light source (LED) of this luminaire must not be exchanged or replaced by the user.
- Exceeding the permissible ambient temperature will redu- ce the luminaire’s lifecycle, resulting in premature failure in extreme
- Avoid condensation of the
- Any mechanical load to the LED circuit boards is not
- LEDs can be damaged by electrostatic discharge (ESD). This may result in total Always avoid direct contact.
- Depending on their concentration, chemicals can corrode the LED modules and lead to reduction of luminous flux, drift of luminous colour and/or total Always avoid direct contact with acids, bases, solvents, volatile organic compounds and/or oils. Ensure sufficient ventilation to prevent damage by gas release.
- Avoid ESD problems by not routing feed-through wiring directly along the wiring of the
- Connect control inputs of dimmable luminaires with stan- dard cables suitable for power supply
Changes to our products
Modification, reworking, re-marking of products can have a negative impact on
their technical properties, destroy them and possibly cause consequential
damage to other objects. The manufacturer cannot be held responsible for
damage caused by such changes.
d+ IP5x – dust nonconductive
d+ IP6x – dust conductive and dust nonconductive.
Information for service, cleaning and disposal of luminaire
The safety instructions in your national language can be found on the Internet at: doc.regiolux.de/safe- ty_BG.pdf
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>