REGIOLUX 212875-22 LED Untitled Instruction Manual

: June 15, 2024
: REGIOLUX

Table of Contents

REGIOLUX 212875-22 LED Untitled
Product Information
Product Usage Instructions
MODELS
INSTALLATION
Safety Information
Information for service
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

REGIOLUX 212875-22 LED Untitled

REGIOLUX-212875-22-LED-Untitled-PRODUCT

Product Information

Specifications:
- Product Name: LED Luminaire
- Model Number: Art-Nr: 212875-09/22
- Safety Rating: IP5x (dust nonconductive) or IP6x (dust conductive and dust nonconductive)
General Safety Information:
- It is essential to follow all applicable safety regulations and standards when using the LED luminaire. Only a qualified electrician should perform any electrical work.
Operation of the Luminaire:
- The LED luminaire should not be modified, reassembled, or repaired by the user. The LED light source should not be replaced or exchanged by the user. Doing so can reduce the lifespan of the luminaire and potentially lead to premature failure.
Preventing Damage:
- To prevent damage to the LED modules, avoid direct contact with acids, bases, solvents, volatile organic compounds, oils, or any other harmful substances.
- Adequate ventilation is necessary to prevent damage from gas release. Avoid running cables directly alongside the luminaire’s wiring.
Changes to the Product:
- Modifying, reworking, or re-marking the product can negatively impact its technical properties and may cause consequential damage to other objects.
- The manufacturer cannot be held responsible for any damages resulting from such changes.

Product Usage Instructions

Replacing LED:
- If an LED in the luminaire has aged or failed, it should be replaced. However, this task should only be performed by a qualified electrician. Ensure that the replacement LED is compatible with the luminaire.
Installation:
- Follow the provided installation instructions for proper setup of the LED luminaire. Ensure that the luminaire is securely fixed according to the instructions provided.
Maintenance:
- Regularly inspect the LED luminaire for any signs of damage or malfunction. If any issues are identified, contact a qualified electrician for further assistance.
FAQ (Frequently Asked Questions)
- Q: Can I replace the LED myself?
- A: No, the LED in the luminaire should only be replaced by a qualified electrician.
- Q: What should I do if the luminaire is not working properly?
- A: If you experience any issues with the luminaire, contact a qualified electrician for troubleshooting and repairs.

MODELS

$REGIOLUX-212875-22-LED-Untitled-FIG-1 $1$$

INSTALLATION

$REGIOLUX-212875-22-LED-Untitled-FIG-1 $2$$

Safety Information

General Safety Information

Installation, commissioning and maintenance only by qualified electrician.
Never perform any work on the luminaire with voltage applied. Danger to life due to electric shock!
Electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
Damaged luminaires must not be operated.
Observe and retain safety instructions and mounting instructions
No liability is accepted for damages resulting from improper use.
Use genuine parts only for repair.
Ensure stability of the ceiling and fastening elements.
The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C, unless otherwise described by labeling the luminaire.

Operation of the luminaire

Abnormal dark spots may be an indication of partial failure of LEDs. Inspect regularly and replace the luminaires affected. The light source (LED) of this luminaire must not be exchanged or replaced by the user.
Exceeding the permissible ambient temperature will reduce the luminaire’s lifecycle, resulting in premature failure in extreme cases.
Avoid condensation of the luminaire.
Any mechanical load to the LED circuit boards is not permitted.
LEDs can be damaged by electrostatic discharge (ESD). This may result in total failure. Always avoid direct contact.
Depending on their concentration, chemicals can corrode the LED modules and lead to reduction of luminousux, drift of luminous colour and/or total failure. Always avoid direct contact with acids, bases, solvents, volatile organic compounds and/or oils.
Ensure suficient ventilation to prevent damage by gas release.
Avoid ESD problems by not routing feed-through wiring directly along the wiring of the luminaire.
Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.

Changes to our products
Modification, reworking, re-marking of products can have a negative impact on their technical properties, destroy them and possibly cause consequential damage to other objects.The manufacturer cannot be held responsible for damage caused by such changes.