Irfora

Irfora Turntable with Speakers Vintage Phonograph Record Player

Specifications

• ITEM TYPE: Phonograph
• BRAND: Irfora
• COLOR: Red, blue, black(optional)
• ELECTRIC PLUG: Two kinds of plugs(optional)
• SOUND CONFIGURATION: PH/INT
• PACKAGE WEIGHT: 2934g / 6.46pounds
• PACKAGE SIZE: 380 330 180mm / 14.9 12.9 7.08inches
• COMPATIBLE WITH: 180/200/300mm diameter and 33/45/78 RPM records.

Introduction

Box made of PU leather that is both basic and generous in style. It is Compatible with the majority of records on the market, three speeds. Ruby needle to ensure precise pickup. It is ideal for playing music and is simple to use. Its exquisiteness is enhanced by built-in speakers and a tonearm with gentle dampening adjustment. It is compatible with 180mm, 200mm, and 300mm records, as well as 33, 45, and 78 RPM.

WHAT’S IN THE BOX

• 1 * Power adapter
• 1 * Phonograph
• 1 * User manual

HOW TO GET BEST SOUND

• Keep the dust off of your records. Order an excellent record brush along with your turntable when you place an order with Crutchfield.
• Include a plush record mat.
• Reduce obnoxious vibrations.
• Examine your cords.
• Deep-clean your records, please.
• Your platter will be improved by upgrading your cartridge.
• Invest in a phono preamp of superior quality.

HOW IT WORKS

• Pull the record gently out of its sleeve. Avoid touching the record grooves at all costs.
• Insert the record. Put the record on the plater with the spindle going through the record’s center hole.
• Change the speed.
• Examine the cue lever.
• Set the tonearm in place.
• Tonearm lowered

HOW TO CONNECT VINTAGE SPEAKERS TO A RECORD PLAYER

• Use one set of RCA cables to connect the turntable to the preamp.
• Using one set of RCA cables, connect the preamp to the receiver.
• Use the speaker cable to connect the speakers to the receiver.

HOW TO ADJUST A TURNTABLE

The adjustment is straightforward: using a level, determine where the turntable is in relation to the axes of width and depth, and then raise the legs of the furniture or add wood slats underneath it until the turntable is level. Some types allow the feet to be adjusted in order to level the gadget.

HOW TO USE TURNTABLE WITHOUT SPEAKER

It only requires switching the receiver’s input from the TV to the phono input. It is more difficult and cumbersome to switch between all of your audio sources without a receiver. They would need to be manually rewired. Alternately, use different speakers for each source.

Frequently Asked Questions

Why won’t my turntable and speakers work together?

Make sure the preamp switch is in the LINE position if your speakers or amplifier don’t have a preamp (if applicable). Make sure the external preamp is turned on, the RCA connections, and the grounding cables are tight if your turntable doesn’t have an internal preamp. Verify that your amplifier and speakers are turned on.

Can I use Bluetooth to pair my record player with headphones?

With either of these versions, all you need to do to start playing is pair the turntable with your audio device. Every record player with Bluetooth built in also has a phono preamp built in.

How does a turntable alter the sound?

Cheap, poorly made turntables tend to sound screechy and amplify groove noise. The majority of inexpensive ‘tables have weak bass definition and little power. LPs sound far better when played on a top-notch turntable, according to audiophiles.

Why do records sound more dynamic?

Your vinyl record’s sound comes from air vibrating, just like any other source of sound. Therefore, if your record player generates music at a quicker rate than the record is first recorded, the vibrations will also reach the listeners’ ears at a faster rate.

How can I tell if the turntable is spinning at the right speed?

Once the platter has begun to spin, focus the strobe light on the rotating strobe disc. The strobe lines or markings will appear stationary rather than moving if the turntable turns at the proper speed (either 33 1/3 or 45 RPM depending on what you are testing).

Why does my record player have a rapid sound?

The most frequent cause of this issue is an incorrectly placed belt. The platter will spin too quickly if the belt comes out of the groove while the turntable is being used and is able to move up and down on the spindle. The belt’s placement on the platter’s inner ring has to be adjusted.

The turntable can you leave a record on it?

Ideally, you should only use your record while keeping it on your sleeve. You expose the vinyl record to dirt and dust if you leave it on the platter or for a long time. The likelihood of scratching the record’s surface increases if you leave it on the turntable frequently.

What does a vintage turntable require?

In general, four parts are required: speakers to create sound, an amplifier to drive the speakers, a phono pre-amp to enhance the turntable’s signal entering the amplifier (or not, more on this later), and a turntable to play the records.

What happens if your turntable is not grounded?

A ground loop will be created if a turntable is not grounded due to a little variance in ground potential. A 60-cycle alternating current could then travel along your audio wires from a turntable to an amplifier as a result of a ground loop.

A turntable – does it require an amplifier?

You will require an amplifier to connect to the preamplifier once you have a turntable and preamp to boost the signal to line level. You might use powered speakers with an integrated amplifier, a separate amplifier, or an A/V receiver (different than pre-amp).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>