REGIOLUX 1500×240 AVAMP LED Surface Mounted Luminaires Instructions

Table of Contents

REGIOLUX-1500x240-AVAMP-LED-Surface-Mounted-Luminaires-
PRODUCT

Specifications

Product Name: LED
Model Number: Art-Nr: 212875-09/22
Safety Rating: IP5x – dust nonconductive, IP6x – dust conductive and dust nonconductive

Safety Information

Before using the product, please read and follow these safety guidelines:

Only qualified electricians should handle the installation and maintenance of the luminaire.
Danger to life due to electric shock if safety precautions are not followed.
Comply with all applicable safety and accident prevention regulations and standards.
Avoid improper use or modifications of the product that can impact its technical properties and cause damage.
Avoid direct contact with acids, bases, solvents, volatile organic compounds, oils, or any other harmful substances.
Ensure sufficient ventilation to prevent damage by gas release.

Operation of the Luminaire

To operate the luminaire:

Inspect the LED modules regularly and replace any defective luminaires.
Do not attempt to exchange or replace the LED modules yourself.
- Contact a qualified electrician for any replacements.
Avoid direct contact with the wiring of the luminaire.
Use standard cables suitable for the power supply voltage.

FAQ (Frequently Asked Questions)

Q: Can I replace the LED modules myself?

Q: What happens if I use the luminaire improperly?

A : Improper use can reduce the lifespan of the luminaire and may lead to premature failure.

Q: Can I modify or rework the product?

A : Modifying or reworking the product can hurt its technical properties and may cause damage.
The manufacturer cannot be held responsible for any damage caused by such changes.

REGIOLUX-1500x240-AVAMP-LED-Surface-Mounted-Luminaires-
FIG-1

This luminaire contains a light source of energy efficiency class B (LF840), C (LF830)
This luminaire contains a light source of energy efficiency class C

REGIOLUX-1500x240-AVAMP-LED-Surface-Mounted-Luminaires-
FIG-2

REGIOLUX-1500x240-AVAMP-LED-Surface-Mounted-Luminaires-
FIG-3

REGIOLUX-1500x240-AVAMP-LED-Surface-Mounted-Luminaires-
FIG-4 REGIOLUX-1500x240-AVAMP-
LED-Surface-Mounted-Luminaires-FIG-9

REGIOLUX-1500x240-AVAMP-LED-Surface-Mounted-Luminaires-
FIG-5

General Safety Information

Installation, commissioning, and maintenance only by a qualified electrician.
Never perform any work on the luminaire with voltage applied. Danger to life due to electric shock!
The electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
Damaged luminaires must not be operated.
Observe and retain safety instructions and mounting instructions
No liability is accepted for damages resulting from improper use.
Use genuine parts only for repair.
Ensure stability of the ceiling and fastening elements.
The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C unless otherwise described by labeling the luminaire.

Operation of the luminaire

Abnormal dark spots may be an indication of partial failure of LEDs. Inspect regularly and replace the luminaires affected.
The light source (LED) of this luminaire must not be exchanged or replaced by the user.
Exceeding the permissible ambient temperature will reduce the luminaire’s lifecycle, resulting in premature failure in extreme cases.
Avoid condensation of the luminaire.
Any mechanical load on the LED circuit boards is not permitted.
LEDs can be damaged by electrostatic discharge (ESD).
This may result in total failure. Always avoid direct contact.
Depending on their concentration, chemicals can corrode the LED modules and lead to a reduction of luminousux, drift of luminous color, and/or total failure.
Always avoid direct contact with acids, bases, solvents, volatile organic compounds, and/or oils. Ensure sufficient ventilation to prevent damage by gas release.
Avoid ESD problems by not routing feed-through wiring directly along the wiring of the luminaire.
Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.

Changes to our products

Modification, reworking, and re-marking of products can harm their technical properties, destroy them, and possibly cause consequential damage to other objects.
The manufacturer cannot be held responsible for damage caused by such changes.
+ IP5x – dust nonconductive
+ IP6x – dust conductive and dust nonconductive