REGIOLUX SRT 0750 Support Rail Instructions

June 15, 2024
REGIOLUX

REGIOLUX SRT 0750 Support Rail

REGIOLUX-SRT-0750-Support-Rail-PRODUCT

Product Information

Specifications

  • Product Name: LED Luminaire
  • Model Number: Art-Nr: 212875-09/22
  • Safety Rating: IP5x (dust nonconductive), IP6x (dust conductive and dust nonconductive)

Product Usage Instructions

Safety Information

Before using the LED luminaire, please read and understand the following safety information:

  • Only a qualified electrician should install and operate this product.
  • Danger to life due to electric shock if not installed properly.
  • Ensure that all applicable safety and accident prevention regulations are followed.
  • Keep these instructions for future reference.

Operation of the Luminaire

To ensure proper operation and longevity of the LED luminaire, please follow these guidelines:

  • Inspect the LED lights regularly and replace any defective luminaires.
  • Do not attempt to exchange or replace the LED light source yourself. Contact a qualified electrician for any replacements.
  • Avoid improper use or handling of the luminaire as it may reduce its lifespan or result in premature failure.
  • Avoid direct contact with acids, bases, solvents, volatile organic compounds, and oils, as they can damage the LED modules and cause a decrease in luminous color or total failure.
  • Ensure sufficient ventilation to prevent damage by gas release.
  • Do not install the luminaire directly along with other wiring.
  • Use standard cables suitable for the power supply voltage.

INSTRUCTION

REGIOLUX-SRT-0750-Support-Rail-FIG-1 REGIOLUX-SRT-0750-Support-Rail-FIG-3 REGIOLUX-
SRT-0750-Support-Rail-FIG-4 REGIOLUX-SRT-0750-Support-Rail-
FIG-5 REGIOLUX-SRT-0750-Support-Rail-
FIG-6 REGIOLUX-SRT-0750-Support-Rail-
FIG-7 REGIOLUX-SRT-0750-Support-Rail-
FIG-8 REGIOLUX-SRT-0750-Support-Rail-
FIG-9

Demontage

REGIOLUX-SRT-0750-Support-Rail-FIG-10

Safety Information

General Safety Information

  • Installation, commissioning and maintenance only by electrician.
  • Never perform any work on the luminaire with voltage applied. Danger to life due to electric shock!
  • The electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
  • Damaged luminaires must not be operated.
  • Observe and retain safety instructions and mounting instructions
  • No liability is accepted for damages resulting from improper use.
  • Use genuine parts only for repair.
  • Ensure stability of the ceiling and fastening elements.
  • The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C, unless otherwise described by labeling the luminaire. Operation of the luminaire
  • Abnormal dark spots may be an indication of partial failure of LEDs. Inspect regularly and replace the luminaires affected. The light source (LED) of this luminaire must not be exchanged or replaced by the user.
  • Exceeding the permissible ambient temperature will reduce the luminaire’s lifecycle, resulting in premature failure in extreme cases.
  • Avoid condensation of the luminaire.
  • Any mechanical load to the LED circuit boards is not permitted.
  • LEDs can be damaged by electrostatic discharge (ESD). This may result in total failure. Always avoid direct contact.
  • Depending on their concentration, chemicals can corrode the LED modules and lead to the reduction of luminous 昀氀ux, drift of luminous colour and/or total failure. Always avoid direct contact with acids, bases, solvents, volatile organic compounds and/or oils. Ensure suf昀椀cient ventilation to prevent damage by gas release.
  • Avoid ESD problems by not routing feed-through wiring directly along the wiring of the luminaire.
  • Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.

Changes to our products

Modification, reworking, and re-marking of products can have a negative impact on their technical properties, destroy them and possibly cause consequential damage to other objects. The manufacturer cannot be held responsible for damage caused by such changes.

  • + IP5x – dust nonconductive
  • + IP6x – dust conductive and dust nonconductive

Information for service, cleaning and disposal of luminaire

Instruction for luminaire service:

Instruction for end of life:

Instruction for luminaire-cleaning

REGIOLUX-SRT-0750-Support-Rail-
FIG-13

SRT.System

  • SRT 0750 7×2,5 qmm
  • SRT 0750 Ilx2,5 qmm
  • SRT 1500 7×2,5 qrnm
  • SRT 1500 5×2,5+6×1 qrnm
  • SRT 2250 7×2,5 qmm
  • SRT 2250 5K2,5+6×1 qrnm
  • SRT 0750 HFFR 70,5 qmm
  • SRT 0750 HFFR 11×2,5 qmm
  • SRT 1500 HFFR 7×2,5 qmm
  • SRT 1500 HFFR 1 lx2,5 qmm
  • SRT 2250 HFFR 7×2,5 qmm
  • SRT 2250 HFFR 1 lx2,5 qmm

Regiolux GmbH Hellinger Str. 3 D-97486 Königsberg/Bay.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

REGIOLUX User Manuals

Related Manuals