iDPRT SP410BT Bluetooth Thermal Label Printer User Manual

iDPRT SP410BT Bluetooth Thermal Label Printer

Package List

Before using the product, make sure all parts are present. If any part is missing or damaged please contact our after-sales support team.

How to Start

Quick View

1. Feed Button (Status Indicator)
2. Paper Guide
3. Release Latch
4. Power Receptacle
5. USB Port
6. Print Head Module
7. Platen
8. Movable Paper Sensor

Plug-in Power Supply

Warning:
Make sure your printer is turned off

Printer Connection

way 1: Connect to pc via USB cable

Way 2: Wireless Printer via Bluetooth

• Step 1: Download the Here Label App on your mobile device
• Step 2: Launch the application and click the upper right-hand corner to search for your printer.

BT Name: SP410BT_**(the last four digits of the MAC address)

Get started With printing by using either the App or your PC.

Driver Installation

Make sure your printer is ON, and the USB cable is connected to your computer.

Note:
Under different operating systems, the process of installation has slight differences. Please operate it according to the tips.

• Step 1: Visit http://www.idprt.com/downloads.html.

• Step 2: Find the driver that matches your device and system.
  (ALL PRODUCTS-—SP410BT —> ALL TYPE—Driver —> ALL SYSTEM)

• Step 3: Download the driver and follow the prompts to install it.

For Windows:

Settings

For Windows:

Setup the SP410BT Printing Preferences:

For macOS:

Load the Labels

1. Turn on the power of the printer.
2. Pull the release latch to open the cover.
3. Load thermal labels. The side of the thermal label that you peel off should be facing up. Then adjust the label with the label slot.
4. Close the cover. Press the button until the light turns blue, and then the printer will automatically draw the paper doing the label detection.

LED Display

Tips:
When finishing the driver installation and the LED flashes blue, you can begin your printing journey with the SP410BT Label Printer!

FAQ

Q1: What can I do when printing blank labels?
A1: There are two possible reasons.

• First, the most common reason is that your labels are loaded upside down
• Please make sure that your labels are properly loaded with the print side up.
• Second, you may check if the paper type is correct. Here is a quick way:
• Power on the printer, load paper, and press and hold the feed button until the green indicator light flashes once to release. It will print a self-check page. If the printed label is blank. we may confirm it is not a thermal label. Please replace it with a thermal label and try again, and your problem shall be solved.

Q2: Why is my printing offset?
A2: You may check whether the blue paper guides have fixed the label. Pull the paper pass it through the paper guides, and adjust the guides according to the paper width.

Q3: Why does the printer spit out a few blank labels after printing successfully?

• A3: If you are using shipping labels for printing, please check media type on driver settings. make sure it is “Labels with Gaps:
• Go to Control Panel -> Devices and Printers -> Right click on “SP410BT Printer ->Printer preferences -> Advanced setting -> Media type -> select Labels with Gaps -> OK.

Q4: What can I do when my printing is unclear and hard to read?

A:

1. Please confirm the settings on the driver and set “Half-tone” or “Color Options” to “None”.
2. If you are printing a PDF file, it is recommended to use Adobe Acrobat software to open the PDF file to print.
3. You can set “Darkness” and “Speedt To print more clearly, it is suggested to increase the density or darkness or slow down the printing speed

Note:
Too high density may result in unwanted black lines or labels with high temperature, this may cause the label to be stuck to the middle of the print head.

Q5: Why does my printer keep printing sideways?
A5: The most likely reason is that your label is not properly formatted for 4 x 6 label printing. SP410BT prints exactly what you see on your printing file in the same orientation. So if it has a lot of white space around the label, the printing will be side-ways.

• Check if your shipping platform can provide 4 x 6 labels in the correct orientation.
• We have How-Tos for the most popular platforms, here is the link: http://www.idprt.com/prt_v2/other/question.html.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>