ET2 E23421 Latitude LED Wall Flush Mount Instruction Manual

June 15, 2024
ET2

ET2 LOGOMODEL ID: E23421
COLLECTION: LATITUDE LED Wall/Flush Mount

ET2 E23421 Latitude LED Wall Flush Mount

Before Getting Started

Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach or small children.
Choose a clean,level,spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
**** Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock.
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Check the product cord to be sure is free torn or frayed.

Cleaning & Maintenance

On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

PARTS

Before getting,started,ensure the package contains the following components:

ET2 E23421 Latitude LED Wall Flush Mount - PARTSET2 E23421 Latitude LED Wall Flush Mount -
PARTS1

CCT SELECTION SWITCH ACCESSIBLE ON SIDE 5K: 2700 – 3000 – 3500 – 4000 – 5000K

ET2 LOGO Ampoule: 15W LED Integrated
Made in China
Please consult a qualified electrician prior to install

Documents / Resources

| ET2 E23421 Latitude LED Wall Flush Mount [pdf] Instruction Manual
E23421 Latitude LED Wall Flush Mount, E23421, Latitude LED Wall Flush Mount, LED Wall Flush Mount, Flush Mount, Mount
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ET2 User Manuals

Related Manuals