LEXON LA132 Ray Speaker User Manual

June 15, 2024
LEXON

LEXON LA132 Ray Speaker

LEXON LA132 Ray Speaker

IN THE BOX

  • 2x Ray Speaker
  • 1x USB-C charging cable
  • 1x User manual

PRODUCT OVERVIEW

  1. Speaker
  2. LED light for Bluetooth & Charging status
  3. USB-C port
  4. Microphone
  5. Button
  6. Magnetic surface
    Product Overview

FIRST PAIRING

Important note: These two speakers are already paired together.
Simply turn them ON, then connect them to your mobile device via Bluetooth.

  1. Enable Bluetooth on your mobile device.
    First Pairing

  2. Press and hold the button on each speaker to turn them ON.
    First Pairing

  3. Select LEXON RAY SPEAKER from the Bluetooth list on your mobile device.
    First Pairing

  4. Play music.
    First Pairing

( A ) To Attach the two speakers together: Position the magnetic surfaces towards each other.
First Pairing
( B ) Play/Pause: When music is playing, press the button to play or pause the music.
First Pairing
( C ) Charging: Use the USB-C charging cable supplied and a USB power adapter (not supplied) or any computer to charge your device.
First Pairing
A full charge takes 3 hours.

Unpair the two speakers: When both RAY SPEAKERs are connected, press the button on 1 RAY SPEAKER twice to disconnect them.

Pair the two speakers again: Turn ON both RAY SPEAKERs and press the button on one of the 2 RAY SPEAKERs twice to connect them together. Go to the Bluetooth settings on your mobile device and select LEXON RAY SPEAKER.

To answer or end a call, simply press the button.

LED INFORMATION

Charging : Red
Low battery : Red LED flashing slowly
Fully charged : Off
Ready to pair / Power ON : Blue LED flashing quickly
Only one speaker connected : Blue LED flashing slowly
Both speakers connected via TWS : Main unit – Blue LED flashing slowly / Second unit – Steady blue

SAFETY PRECAUTIONS

  • Do not place the device near heat sources such as heaters or radiators.
  • Only use the voltage specified as correct for the device.
  • Do not expose the device to water during charging, as this could permanently damage the speaker or power source.
  • Keep away from corrosive liquids.
  • Do not insert any conductive objects into the speaker or charging port.
  • Do not open the device or attempt to disassemble the internal parts or modify them in any way.

PRODUCT SPECIFICATIONS

Material: Aluminum / ABS
Weight: 0.23 lbs / 105 g each
Dimensions: Ø1.85 x 2.24″/Ø4.7 x 5.7 cm
Speaker power: 2x 3W
Water resistance: IPX4
Bluetooth version: 5.0
Bluetooth range: 10m
Frequency range: 2.402 – 2.480 GHz
Battery capacity: 700 mAh
Battery voltage: 3.7V
Input voltage: 5V
Playtime: 8h
Charging time: 3h
Charging system: USB Type-C
Operating temperature: 0°C – 35 °C
International warranty: 1 year

CE DIRECTIVE

This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
All essential radio test suites have been carried out. This restriction will be applied to all Member States of European Union.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

Declaration of Conformity

Hereby, LEXON declares that the product type LA132 is in compliance with Directives 2014/53/EU & 2011/65/EU. The
full text of the EU declaration of conformity is available at the following internet address:
https://www.lexon-design.com/assets/certifications-ce-rayspeaker.pdf

CONFORMITY ASSESSMENT

The device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations SI 2017:1206 (as amended).

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Declaration of Conformity

Hereby, LEXON declares that the product LA132 is in compliance with the following Regulations: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electrical Equipment 2012. The Full test of the UK declaration of conformity is available at the following internet address: https://www.lexon-design.com/assets/certifications-ce-rayspeaker.pdf

Bluetooth
Transmitter power:-0.41dBm(for EU/UK only)
TX/RX Frequency Range: 2400-2480MHz

DISPOSAL AND RECYCLING INFORMATION

After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies: electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

FCC STATEMENT

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and

  2. this device must accept any interference received, including interference that may cause undesired operation.
    Notice:
    Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
    This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/ TV technician for help.
      RF exposure statements
      The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CANADIAN COMPLIANCE STATEMENT

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CUSTOMER SUPPORT

All trademarks, logos and brand names are the property of their respective owners.
Pictures and specifications are not contractual. Assembled in China.
lexon-design.com I @lexondesignSymbolsLogo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals