USX MOUNT SFL090 Fixed TV Wall Mount Instruction Manual

June 15, 2024
USX-MOUNT

USX MOUNT SFL090 Fixed TV Wall Mount

Specifications

  • Compatible TV sizes: 37-82 inches
  • VESA size range: MAX: 600mm/23.62 (MIN: 150mm/5.91), MAX: 400mm/15.75 (MIN: 100mm/3.94)
  • Maximum weight capacity: 132 lbs. (60 kg)
  • Wall types: Wood stud, solid concrete

Product Usage Instructions

Step 1: Check Compatibility

  1. Check if your TV’s VESA size is within the specified range.
  2. If the VESA size is within the range, proceed to the next step. Otherwise, this mount is not compatible.

Step 2: Check TV Weight and Wall Type

  1. Ensure that your TV, including accessories, does not weigh more than 132 lbs. (60 kg).
  2. Determine the type of wall you have: drywall with wood studs or solid concrete.
  3. If you have drywall with wood studs, proceed to the “Wood Stud Install” section.
  4. If you have solid concrete or are unsure about your wall type,  contact us for assistance.

Wood Stud Install

CAUTION: Do not install into drywall alone.

  1. Ensure you have all the necessary tools listed:
    • Tape Measure
    • Pencil
    • Screwdriver
    • Electric Drill
    • 3/8 in. (10 mm) Socket Wrench
    • Stud Finder
    • 1/8 in. (3 mm) Wood Drill Bit
  2. Measure and mark the desired height on the wall using a tape measure and pencil.
  3. Use a stud finder to locate the wood studs within the marked area.
  4. Drill pilot holes into the wood studs using a 1/8 in. (3 mm)  wood drill bit.
  5. Attach the wall plate to the wood studs using the provided screws and a screwdriver.

Concrete Install

CAUTION: Do not install into drywall alone.

  1. Ensure you have all the necessary tools listed:
    • Tape Measure
    • Pencil
    • Screwdriver
    • Electric Drill
    • 3/8 in. (10 mm) Socket Wrench
    • 1/8 in. (3 mm) Wood Drill Bit
    • 3/8 in. (10 mm) Masonry Drill Bit
    • Hammer
  2. Measure and mark the desired height on the wall using a tape measure and pencil.
  3. Use a stud finder to locate the wood studs within the marked area.
  4. If you are unsure about your wall type or need assistance,  contact us for guidance.

FAQ

  • What should I do if my TV’s VESA size is not within the specified range?
    If your TV’s VESA size is not within the specified range, this mount is not compatible with your TV.

  • Can I exceed the maximum weight capacity indicated?
    No, you should not exceed the maximum weight capacity indicated. Using this mount with products heavier than the maximum weight capacity may result in collapse and possible injury.

  • What should I do if I have a different wall type or I’m unsure about my wall type?
    If you have a different wall type or are unsure about your wall type, please contact us for assistance.

  • Are all the necessary tools included with the product?
    No, the necessary tools are not included with the product. You will need to have or acquire the listed tools separately.

  • Can I install the mount into drywall alone?
    No, you should not install the mount into drywall alone. It is designed for use in wood stud or solid concrete walls.

If you have any questions along the way, just message to us. We’re ready to help!
CAUTION : PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS

Before getting started

let’s check below lists to make sure it is just right for you!USX-MOUNT-
SFL090-Fixed-TV-Wall-Mount-FIG- \(1\)

Dimensions

USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(2\)

Parts and Hardware

  • WARNING : This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact  Customer Service.
  • Never use damaged parts!
  • NOTE: Not all hardware included will be used.

Parts and Hardware for STEP 1USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(3\)

Parts and Hardware for STEP 2USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(4\)

Concrete wall anchor (NOT INCLUDED)

Contact us at telephone 1-800-558-5930 or message to us to have these additional pieces shipped directly to you

Assemble Wall plate

USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(5\)

Select TV ScrewsUSX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(6\)

Figure out the suitable position of bracketsUSX-MOUNT-SFL090-Fixed-TV-
Wall-Mount-FIG- \(7\)

Need Spacer?USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(8\)

Attach the TV PlateUSX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(9\)

Attach Wall Plate to Wall Wood Stud Option

  • Drywall covering the wall, must not exceed 5/8 in. (16 mm)
  • Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
  • Maximum horizontal space between fasteners: 24 in. (609.6 mm)
  • Stud center must be verified
  1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using a thin nail,  or an edge-to-edge stud finder.

  2. Position the mounting template at your desired height and line up the holes with your stud center line. Level the mounting template and mark the hole locationsUSX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG- \(10\)

  3. 3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit.
    IMPORTANT : Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center of the studs.

  4. Install wall plate using lag bolts. Tighten the lag bolts only until they are pulled firmly gainst the wall plate.
    CAUTION : Improper use could reduce the holding power of the lag bolt.
    DO NOT over-tighten the lag bolts
    Go to STEP 3USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(11\)

Attach Wall Plate to Solid Concrete Wall

CAUTION : Avoid potential personal injury or property damage!

  • Mount the wall plate assembly unit directly onto the concrete surface
  • Minimum solid concrete thickness: 8 in. (203 mm)
  1. Position the mounting template on the wall at your desired height. Level the mounting template and mark the hole locations.

  2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
    IMPORTANT : Pilot holes must be drilled to a depth of 2.5 in. (64 mm ).USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG- \(12\)

  3. Insert anchors.
    CAUTION : Be sure the anchors are seated flush with the concrete surface.

  4. Install wall plate using lag bolts . Tighten the lag bolts only until they are pulled firmly gainst  the wall plate.
    CAUTION : Improper use could reduce the holding power of the lag bolt .USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG- \(13\)
    DO NOT over-tighten the lag bolts

Wall Plate Installation Integrity Test

Before hanging TV, please try to pull the mount to make sure that it has been assembled on the wall tightly.USX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(14\)

Hang and Secure TV to Wall PlateUSX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(15\)

Take Down the TV from the MountUSX-MOUNT-SFL090-Fixed-TV-Wall-Mount-FIG-
\(16\)

Documents / Resources

| USX MOUNT SFL090 Fixed TV Wall Mount [pdf] Instruction Manual
SFL090 Fixed TV Wall Mount, SFL090, Fixed TV Wall Mount, TV Wall Mount, Wall Mount, Mount
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals