ULINE Double Sided Grid Bike Pack User Guide
- June 7, 2024
- ULINE
Table of Contents
ULINE Double Sided Grid Bike Pack
TOOL NEEDED
9/16″ Wrench
PARTS
Leg x 2
|
Grid Section x 1
|
Grid Section x 1
---|---|---
|
Bolt x 8
|
Locknut x 8
ASSEMBLY
-
Insert bolt upward through last hole in leg and pole. Fasten loosely with locknut. Repeat by attaching other leg to pole. (See Inset A)
-
Insert bolt through hole at the top of the leg and end of grid. (See Inset B)
NOTE: Grid can only be positioned one way for mounting. The holes on top are drilled diagonally through the tube at a slight downward angle. -
Fasten loosely with locknut. Repeat by attaching other leg to grid.
-
Align bottom holes of grid with middle hole of legs. Insert bolt upward and fasten loosely with locknut. Repeat by attaching other leg to grid. (See Inset C)
-
Insert bolt upward through remaining hole in leg and other pole. Fasten loosely with locknut. Repeat by attaching other leg to pole. (See Inset D)
-
Complete assembly by tightening all bolts.
MOUNTING (OPTIONAL)
TOOLS NEEDED
Electric Drill
|
1/4″ Drill Bit
|
Hammer
---|---|---
- Drill a 1/4″ diameter hole into the concrete, block or stone to a depth of 2½”. (See Inset A)
- Blow out the dust in the hole.
- Place bracket over tubing.
- Drive the spike flush to clamp into drilled hole. (See Inset B)
- Repeat on remaining spikes.
Documents / Resources
|
ULINE Double Sided Grid Bike
Pack
[pdf] User Guide
Double Sided Grid Bike Pack, H-2540, H-2541
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>