USX MOUNT XFL090 TV Wall Mount Low Profile Instruction Manual
- June 14, 2024
- USX-MOUNT
Table of Contents
USX MOUNT XFL090 TV Wall Mount Low Profile
- If you have any questions along the way, just message to us. We’re ready to help!
- CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS
- Before getting started, let’s check the below lists to make sure it is just right for you!
INFORMATION
- Check your TV VESA is within Min and Max size
- No? This mount is NOT compatible.
- Yes? Perfect!
- Does your TV (including accessories) weigh MORE than 132 lbs. (60 kg)?
- No? Perfect – you may continue.
- Yes? This mount is NOT compatible.
- CAUTION: DO NOT exceed the maximum weight indicated. This mounting system is intended for use only with the maximum weights indicated.
- Use with products heavier than the maximum weights indicated may result in the collapse of the mount and its accessories, causing possible injury.
- What is your wall made of?
- Do you have all the tools needed (NOT INCLUDE)
- CAUTION
- This product is designed for use in wood studs, and solid concrete walls – DO NOT install into drywall alone
- The wall must be capable of supporting five times the weight of the TV and mount itself
- Do not use this product for any purpose not explicitly specified by the manufacturer
- The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
Dimensions
Parts and Hardware
- WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged.
- If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
- Never use damaged parts!
- NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
Parts and Hardware for STEP 2
Assemble the Wall plate STEP 3
STEP 1 Attach Brackets to TV
Select TV Screws
Figure out the suitable position of brackets
Need Spacer?
- No, choose suitable screws and washers.
- Yes, choose suitable screws, washers, and spacers.
- Attach the TV Plate
STEP 2A Attach Wall Plate to Wall Wood Stud Option
- CAUTION: Avoid potential personal injury or property damage!
- Drywall covering the wall, must not exceed 5/8 in. (16 mm)
- Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
- Maximum horizontal space between fasteners: 24 in. (609.6 mm)
- The stud center must be verified
- Locate your studs. Verify and mark the center of the stud by finding the stud edges using a thin nail, or an edge-to-edge stud finder.
- Position the mounting template at your desired height and line up the holes with your stud center line. Level the mounting template and mark the hole locations.
- Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit.
- IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center of the studs.
- Insert wall plate using lag bolts. Tighten the lag bolts only until they are pulled firmly against the wall plate.
- CAUTION: Improper use could reduce the holding power of the lag bolt.
- DO NOT over-tighten the lag bolts.
STEP 2B Attach Wall Plate to Solid Concrete Wall
CAUTION: Avoid potential personal injury or property damage!
- ● Mount the wall plate assembly unit directly onto the concrete surface
- ● Minimum solid concrete thickness: 8 in. (203 mm)
- Position the mounting template on the wall at your desired height. Level the mounting template and mark the hole locations.
- Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
- IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm).
- Insert anchors.
- CAUTION: Be sure the anchors are seated flush with the concrete surface.
- Insert wall plate using lag bolts. Tighten the lag bolts only until they are pulled firmly against the wall plate.
- CAUTION: Improper use could reduce the holding power of the lag bolt.
- DO NOT over-tighten the lag bolts.
STEP 3 Wall Plate Installation Integrity Test
Before hanging the TV, please try to pull the mount to make sure that it has been assembled on the wall tightly.
STEP 4 Hang and Secure the TV to the Wall Plate
STEP 5 Take Down the TV from the Mount
Documents / Resources
| USX
MOUNT XFL090 TV Wall Mount Low
Profile
[pdf] Instruction Manual
XFL090 TV Wall Mount Low Profile, XFL090, TV Wall Mount Low Profile, Wall
Mount Low Profile, Mount Low Profile, Low Profile, Profile
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>