luminii 1L Stenos Track Head Instruction Manual
- June 15, 2024
- luminii
Table of Contents
luminii 1L Stenos Track Head
Overview
Installation Instructions
Please read all instructions prior to installation and keep for future reference!
- PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN
- USE ONLY WITH CLASS 2 POWER UNIT
- 24 VOLTS DC
- SUITABLE FOR DRY LOCATIONS ONLY
- USE ONLY WITH LUMINII STENOS TRACK SYSTEM
- Carefully align and then snap the module track adapter into the Stenos track housing. Be sure the unlocking buttons on each side are depressed, or the fixture will not snap into place. If necessary, the adapter can be snapped in one end at a time to more easily actuate unlock buttons.
- To remove modules from the track housing, depress each unlocking button before pulling down on each side of the track adapter. Ensure the track is powered off before removal.
- The track heads can be aimed up and down up to 90°, or rotated up to 365°. The track head should freely rotate – do not force the track head to rotate past its hard stops.
- The track adapter has asymmetric electrical contact pins that allow for 2-channel installations within the Luminii Stenos track system. To switch which channel the track adapter engages with, remove the track adapter, rotate 180°, and reinstall.
Waring Instruction
- To change out the louver and secondary optic, remove them using the soft-tip tweezers that are supplied with the fixture.
- Once the old optical accessories are removed, a new louver / optic combo can be installed by pushing them into place; the integral magnet will complete the connection once properly seated.
- To remove the LED module from the tracked body, remove any optic accessories, then loosen the central captive screw using a 2mm Allen hex key.
- Do not attempt to remove the entire screw as it will remain in the LED module.
- Once the screw is fully loosened, gently remove the LED module. If the module does not fall out freely, gently wiggle the module back and forth to jostle it out of place.
- To install a new LED module, follow these steps in reverse order.
LUMINII RESERVES THE RIGHT TO CHANGE SPECIFICATIONS & INSTRUCTIONS WITHOUT NOTICE.
Contact Information
- 7777 Merrimac Ave Niles, IL 60714
- T. 224.333.6033
- F. 224.757.7557
- info@luminii.com
- www.luminii.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>