wolfcraft 143003676 Door Frame Assembly Set Pro Instruction Manual
- June 15, 2024
- wolfcraft
Table of Contents
wolfcraft 143003676 Door Frame Assembly Set Pro
Product Information
Specifications:
- Model Number: 143003676 / 06.23
- Height Range: 60 – 100 cm
- Width Range: 8 – 33 cm
- Product Type: Door Frame Assembly Set PRO
Description:
The Door Frame Assembly Set PRO is a versatile tool that allows for easy
installation of door frames. It is designed to provide stability and precision
during the assembly process.
Features
- Adjustable height and width to fit various door frame sizes
- Durable construction for long-lasting use
- Easy-to-use tightening mechanisms for secure installation
- Includes foam mounting strips for added stability
Product Usage Instructions
Step 1: Preparation
Before starting the assembly process, make sure you have all the necessary
tools and materials. This includes the Door Frame Assembly Set PRO, a
screwdriver, and any additional shims or spacers that may be required.
Step 2: Positioning the Frame
Select the desired location for the door frame and position the assembly set
accordingly. Make sure the frame is aligned with the surrounding walls and
floor.
Step 3: Attaching the Frame
Use the included screws to attach the frame to the wall. Make sure to secure
it firmly, but avoid overtightening.
Step 4: Adjusting Height and Width
Use the adjustable mechanisms (a) and (b) to set the desired height and width
of the door frame. Refer to the specifications for the recommended range.
Step 5: Leveling the Frame
Ensure that the frame is level both horizontally and vertically.
Use shims or spacers (c) and (d) if necessary to achieve a perfectly level
position.
Step 6: Securing the Frame
Tighten the frame securely using the tightening mechanisms (e) and (f). Make
sure the frame is stable and secure before proceeding.
Step 7: Mounting the Door
Place the door onto the installed frame and align it properly.
Use the provided foam mounting strips to fill any gaps and ensure a snug fit.
Step 8: Final Adjustments
Check the alignment and functionality of the door. Make any necessary
adjustments using the adjustable mechanisms (g) and (h).
Step 9: Finishing Touches
Once satisfied with the installation, remove any excess mounting foam and
finish off the door frame as desired.
Frequently Asked Questions (FAQ)
Q: Can this assembly set be used for different door sizes?
A: Yes, the Door Frame Assembly Set PRO is adjustable in both height and
width, allowing it to accommodate various door sizes within the specified
range.
Q: Are additional tools required for installation?
A: The assembly set comes with all the necessary screws and mounting
strips. However, you will need a screwdriver and may require additional shims
or spacers depending on your specific installation needs.
Q: Is this assembly set suitable for DIY use?
A: Yes, the Door Frame Assembly Set PRO is designed to be user-friendly
and can be used by DIY enthusiasts with basic tools and knowledge.
PARTS
Door Frame Assembly Set PRO
- Assemble the door frame as per the door manufacturer’s instructions.
- Using the head jamb for guidance, adjust the door frame assembly jig to the inside width of the jambs.
- Fasten two jigs to the jambs, one at the height of the lock and the other at the height of the lower hinge.
- To do so, insert the clamping plates (g) into the groove without making contact, and tighten.
- If needed, the clamping plates (d) and (g) can be tightened in a controlled manner in a clockwise direction by turning the eccentric levers (c).
- Position the assembly jig so that the bar supports the jambs as near to the door side as possible.
- The jigs and door frame now form a solid unit.
- Position the door frame in the centre of the wall aperture, and secure (e.g. with wedges) so it cannot fall.
- Fasten the frame clamps at the top left and right corners of the jambs. To do so, insert the clamping plates (d) into the groove without making contact, and tighten.
- With the adjusting screw (a), slightly tighten the frame clamp on the wall side. Do not tighten fully.
- Make sure the door frame is horizontal, placing supports underneath if necessary.
- Using the adjusting screws (a), position the door frame vertically against the wall. Place wooden spacer blocks behind the architrave if necessary.
- Position the door frame vertically against the inside of the jambs. Use the adjusting screws (f) to move the jambs as necessary.
- Do this with all four adjusting screws (f). The jambs are now square and fixed at the sides.
- Use the adjusting screws (b) to position the jambs vertically.
- Fill the edges around the jambs with foam. Before you do so, check the frame by hanging the door and ensuring it works.
- Completely release the clamping plate/eccentric lever and remove without making contact.
- After the spray foam has set, remove superfluous foam and fit the architrave.
Warranty Statement
Dear DIY enthusiast,
You have purchased a high-quality wolfcraft appliance which we know you will
enjoy using.
wolfcraft appliances are built to high technical standards and undergo
intensive development and testing before leaving the factory. Constant checks
and regular tests during their production ensure a high standard of quality.
Sound technical developments and reliable quality assurance give you the
certainty that you have made the right purchase decision. For this wolfcraft
product we grant you a 10 year guarantee from the date of purchase, provided
the product is used exclusively for DIY purposes.
This warranty only covers damage to the purchased item itself and only such
damage that is attributable to material or manufacturing defects. This
warranty does not cover defects or damage attributable to improper operation
or inadequate maintenance of the product. Moreover, the warranty does not
include the effects of normal wear, or defects or damage known to the customer
upon conclusion of the purchase contract. Warranty claims can only be asserted
upon submission of the invoice/proof of purchase. The warranty granted by
wolfcraft does not limit your legal rights as a consumer (supplementary
performance, rescission or reduction, compensation for damages or expenses).
Address warranty claims to:
wolfcraft GmbH
Wolffstraße 1
56746 Kempenich
Germany
wolfcraft GmbH
Wolffstraße 1
D-56746 Kempenich
Tel.: + 49 (0) 26 55 51 280
Fax: + 49 (0) 26 55 502 180
technical.service@wod.wolfcraft.com
References
- Home | Lumen
- Home :: My site
- Hand Tools and Project Solutions | wolfcraft GmbH
- Hand Tools and Project Solutions | wolfcraft GmbH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>