CYSPO T6 3-in-1 Wireless Charging Station User Guide
- June 6, 2024
- CYSPO
Table of Contents
3-in-1 Wireless Charging Station
Model: T6 User Guide
Product overview
Specifications
| Product name | 3-in-1 Wireless Charging Station |
|---|---|
| Input Current | 9V=2A 12V=2A |
| Output Current | Top:3W MAX |
Front:15W MAX
Back: MAX 5W MAX
Interface| TYPE-C
Certficate| DI, CE , FCC, RoHS
Unit Dimension| 120 x 76 x 147mm
Unit N.W.| 235g
Package Dimension| 162x123x80mm
Package G.W.| 309g
Color| Black, White
Using instructions:
- When the product is powered on, the white light, blue light and green light will flash once and then turn off to enter the standby state.
- Place the mobile phone on the corresponding charging area, and the mobile phone will enter the state of wireless charging, the blue light will turn on for 20 seconds and then off.
- Place the TWS headset on the corresponding charging area, and the headset will enter the state of wireless charging, the green light will turn on for 20 seconds then off.
- Place the watch on the corresponding charging area. and the watch enters the state of wireless charging, the white light will turn on for 20 seconds and then off.
- When fully charged or need to stop charging, simply remove the device.
Attention
- Use indoor or under dry environment, avoid placing or using in the environment of high temperature, humidity, strong static electricity and strong magnetic field.
- For your safety, please do not use wet hand plugs and unplug electrical appliances.
- Avoid putting it in a place easily accessible to infants and children.
- Do not use the product if it is contaminated with water or dirt.
- Non-professional personnel are not allowed to open and repair without authorization.
Package contents:
Wireless charger————1
Cable———————–1
User manual—————*1
FCC ID Caution:
This device complies with Part 15 of the FCC rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. The manufacturer is not responsible for any radio
or TV interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 2 0 cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>