Blukar K9750 Adjustable Bike Phone Mount User Guide
- June 14, 2024
- Blukar
Table of Contents
Blukar K9750 Adjustable Bike Phone Mount
Welcome
Thank you for purchasing the Blukar bike phone holder. Please take the time to
read this manual carefully, it will help you install and use this product
correctly. If you need any additional help. please send an email to
support@blukartech.com.
Specifications
- Material: ABS+PC
- Compatible Phone Size: 4.7-6.8inch
- Compatible Handlebar Diameter: 15-30MM
Part Name
- Holder
- Fixing Nut
- Silicone Pad
- Security Lock
- Ball Joint
- Base Clip
- Locking Screw
Installation Instructions
- Loosen the fixing nut and pass the ball joint through the fixing nut (the threads must face the recess), then push it firmly into the recess at the back of the holder and tighten the fixing nut.
- Loosen the locking screw and attach the base clip to the handlebar. (Note: Please add/remove/trim the silicone pad according to the diameter of the handlebar.)
- Adjust the locking screw to suit the handlebar diameter, then press the screw handle towards the base clamp to lock.
Using Instructions
- Push the phone upwards into the holder, and when the phone is fully placed in the holder, turn the lock switch on the holder to “lock mode”.
- After use, turn the locking switch on the back to “open mode”, push the phone up and remove it.
Cautions
- Do not use the product once it has been damaged.
- When installing and using the bicycle phone holder, please ensure that the fixing nut and locking screw are tightened.
TEL: 1-800-360-5881
EMAIL: support@blukartech.com
WEBSITE: www.blukartech.com
Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
All rights reserved.
Product Name: Bike Phone Holder
Model: K9750
Manufacturer: Shenzhen Teng Xun Zhan Yi
Technology Co., Ltd.
Manufacturer Address: Room 302, Building 8,
Yunli Intelligent Park, Fada Road, Bantian Street, Longgang District,
Shenzhen,
Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>