GENERAL FH100 Floor Heating Thermostat User Guide
- June 9, 2024
- GENERAL
Table of Contents
- GENERAL SPECIFICATIONS
- FH100 AND EQUIPMENTS
- TECHNICAL DATA
- ROOM THERMOSTAT
- ROOM THERMOSTAT PLACEMENT
- ROOM THERMOSTAT WORKING PRINCIPLE
- ROOM THERMOSTAT WIRING DIAGRAM
- DECLARATION OF CONFORMITY
- WARRANTY CONDITIONS
- WARRANTY CERTIFICATE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GENERAL FH100 Floor Heating Thermostat
GENERAL SPECIFICATIONS
FH100 is an floor heating room thermostat. User provides more comfortable and affordable heating by setting needed room temperature.
- Sensitive Temperature Measurement
- Wired Connection
- ON / OFF Control
FH100 AND EQUIPMENTS
-
FH100 Room Thermostat
-
Dowels and Screws
TECHNICAL DATA
Dimensions ( H / L / W ) | 85.7mm / 85.7mm / 33.5mm |
---|---|
Operating Current | 230V AC |
Relay NO Switching Current | 7A (240VAC – Resistive load) |
10A (120VAC – Resistive load)
Temperature Measurement
Accuracy
| 0.1oC
0.5oC
Operating Temperature Range| (5oC) – (30oC)
Operating Temperature| (-10oC) – (+50oC)
Storage Temperature| (-20oC) – (+60oC)
ROOM THERMOSTAT
Room Thermostat Indicator LED Descriptions
LED light is on | Heating unit is working |
---|---|
LED light is off | Heating unit is not working |
ROOM THERMOSTAT PLACEMENT
Place your Room Thermostat in a room you use frequently in your living space.
For example; like the hall or living room of your home. Avoid installing the
Room Thermostat in places where there is a lot of air circulation, such as at
the doorway or by the window. Also, do not place it close to heating units
(heater core, fireplace, etc.) and in direct sunlight. We recommend that the
room thermostat is placed at a height of 150 cm from the floor.
ROOM THERMOSTAT WORKING PRINCIPLE
As soon as you energize your Room Thermostat, it will start working. Your Room Thermostat measures the temperature of the environment it is in every 5 seconds. If the ambient temperature rises 0.5 degrees above the temperature you set, your Room Thermostat turns off the heating unit, and if it falls below 0.5 degrees, it turns on the heating unit.
If the floor sensor measures temperature above 28°C, it turns off the heating
unit. The floor sensor operating sensitivity is ±1°C.
Thus, it is ensured that the ambient temperature remains within a certain
range.
External floor sensor is only active when it is connected.
Note: If a floor sensor is installed with Room Thermostat, only GENERAL Life floor sensor should be installed. Otherwise, the product will be out of warranty.
ROOM THERMOSTAT WIRING DIAGRAM
WARNING!
Operations related to the control panel, heating unit or electrical
installation must be carried out by persons with professional qualifications.
DECLARATION OF CONFORMITY
ISIPARK İÇ VE DIŞ TİC. İNŞ. ISITMA SİSTEMLERİ OTO. SAN.A.Ş.which Head Office and production site is located on Fatih Mah. 1188 Sk.No:13/A Sarnıç – Gaziemir – İZMİR – TÜRKİYE confirms and declares that the product marked with CE and its specifications below is covered by the provisions of the mentioned directive.
Brand : GENERAL Life
Product Name : FH100
Product Type : Floor Heating Room Thermostat
Compatible Directives: Electromagnetic Compatibility Regulation 2014/30/EU
(EMC EN 61000-6-3: 2007 + A1: 2011, EN 61000-6-1: 2007)
Low Voltage Directive 2014/35/EU (LVD EN 60730-2-9:2010, EN 60730-1:2011)
Additional Information: The mentioned product can be used with boilers with on
/ off output and compliance with the directives only covers the product.
ISIPARK is not responsible for the entire system’s compliance with the
directives. This statement is not valid if changes are made to the product
without our approval.
WARRANTY CONDITIONS
-
The warranty period starts from the invoice date and warranted against manufacturing defects for 2 years.
-
Devices and apparatus are delivered to the customer in working condition in our company. On-site commissioning is subject to a service fee.
-
The repair of the devices and apparatus covered by the warranty is carried out in our company factory and should send by contracted transportation company. In on-site services, the transportation and accommodation expenses of the service personnel belong to the customer. The shift fee during transportation is added to the service fee and collected in advance.
-
The maintenance of devices and apparatus is done in our company. For the maintenance of the devices and apparatus, the round travel fares belongs to the customer.
-
In case of malfunctioning of the devices and apparatus whose warranty period continues, it is tested in our company whether the malfunction is caused by a customer or manufacturer fault, and it is reported with a report issued by our company.
-
In case of detection of manufacturer-induced errors of devices and apparatus whose warranty period continues, the customer can request a replacement or repair of the devices and apparatus at full expense by the manufacturer, unless it’s higher than the product’s price.
-
In the event that the faults of the devices and apparatus whose warranty period continues are determined as caused by the customer, all expenses would be belong to the customer.
-
Customers should be aware of damages (if there is any) of product and warn manufacturer since the day warranty duration starts. If customer do not warn manufacturer with knowledge of damage, customer lose the rights of article 6.
-
Malfunctions resulting from the use of devices and apparatus contrary to the matters stated in the User Manual are not covered by the warranty.
-
Devices and their apparatus are out of warranty if they are beaten, broken or scratched by the customer.
-
Damages resulting from the use of devices and apparatus belonging to other brands and models without the approval of the manufacturer are not covered by the warranty.
-
Battery leakage and errors due to rust, oxidation and liquid contact by working in acidic / humid environments are not covered by the warranty.
-
When the product is not used for a long period (more than 15 days), remove the batteries. Otherwise, malfunctions that will occur are out of warranty.
-
Damages that may occur during the transportation of devices and apparatus are not covered by the warranty. Customers can take a transportation insurance.
-
Damages caused by mains voltage / faulty electrical installation are not covered by the warranty.
-
Devices and apparatuses are out of warranty for malfunctions caused by force majeure such as fire, flood, earthquake etc.
-
All of the devices and apparatuses, including all their parts, are under the warranty of our company.
-
In case of malfunction of the devices and apparatuses within the warranty period, the time spent during repairment period is added to the warranty period. The repair period of the product cannot exceed 20 working days. This period starts from the date of notification to the service station of the malfunction related to the product or, in the absence of a service station, to the seller, dealer, agency, representative, importer or manufacturer of the product. Consumer can report the problem by; phone, fax, e-mail, registered and reply paid letter or a similar way. However, in case of a conflict , responsibility of prove is belong to the customer. If the malfunction of the product is not repaired within 20 working days, the manufacturer-producer or importer; has to allocate another product with similar features to the use of the consumer until the repair of the product is completed.
-
Although the consumer uses his/her repair rights,
-
If the product breaks down for 4 times in a year or 6 times in warranty duration and these problems effects main purpose of the product.
(starting from delivery time during warranty.) -
Exceeding the maximum time required for repair,
-
In the event that the service station is not available, if it is determined that the repair of the defect is not possible with the report prepared (in order) by one of the seller, dealer, agency, representative, importer or manufacturer, a refund or a price discount at the rate of defect can be requested.
-
-
The customer can make complaints and appeals to consumer courts or consumer arbitration committees.
-
The warranty document must be kept by the customer during the warranty period. If the document is lost, a second document will not be issued. In case of loss, repair and replacement of devices and apparatus will be made for a fee.
WARRANTY CERTIFICATE
Manufacturer
Title: ISIPARK İÇ DIŞ TİC. A.Ş.
Adress: Fatih Mah. 1188 Sk. No:13/A Sarnıç Gaziemir İzmir-TÜRKİYE
Tel: +90 (232) 457 99 50
Fax: +90 (232) 457 91 22
E-mail:
generallife@generallife.com.tr
Authorized Signature:
Company Stamp:
Product
Type: Floor Heating Room Thermostat
Brand: GENERAL Life
Model: FH100
Warranty Period: 2 Years
Max. Time to Repair: 20 Days
Bandrol and Serial Number:
Vendor
Title:__
Adress:
Tel:_ Fax:___
E-Mail:__
Invoice Date and Number:__
Delivery Time and Place:
Authorized Signature:__
Company Stamp:_____
Product
Type: Floor Heatin Room Thermostat
Brand: GENERAL Life
Model: FH100
ISIPARK reserves the rights of changing product specifications and user manuals.
- For all changes, you may visit generallife.com.tr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>