KRAFT KF-SVC 1601 Vacuum Cleaner Instruction Manual

July 4, 2024
KRAFT

KRAFT-logo

KRAFT KF-SVC 1601 Vacuum Cleaner

KRAFT-KF-SVC-1601-Vacuum-Cleaner-image

Specifications

Model Kraft KF-SVC 1601 Kraft KF-SVC 1502
Type of vacuum cleaner Vertical Vertical
Type of vacuum cleaner Cordless Cordless
Motor type DC motor DC motor
Battery type Li-Ion Li-Ion
Battery voltage, V 22.2 22.2
Battery capacity, mAh 2200 2200
Number of batteries 1 1
Power consumption, W 160 150
Voltage, V / Frequency, Hz 220-240 / 50 220-240 / 50
Suction power, kPa 10 8
Number of speed modes 2 2
Dust container capacity, l 0.8 0.8
Maximum battery life, min 40 40
Charging time, h 4 4
Number of filtration stages 5 5
HEPA filter Yes Yes
Noise level, dB 80 80
Suction tube Foldable tube Single tube
Main brush Electric turbo brush Electric turbo brush
Lighting on the main brush Yes Yes
Color Gray / Red Gray / Blue
Dimensions (WxDxH), mm 320x125x1200 320x125x1200
Package dimensions (WxDxH), mm 730x270x140 730x270x140
Net / Gross weight, kg 3 / 3.5 2.8 / 3.3

Complete Set

  • Long nozzle – 1
  • Square brush – 1
  • Base – 1
  • Charging device – 1

Product Usage Instructions

Charging the Vacuum Cleaner:

  1. Connect the charger to a power source.
  2. Insert the charging plug into the vacuum cleaner’s charging port.
  3. The LED indicator will show the charging status.
  4. Allow the vacuum cleaner to charge fully before first use.

Operating the Vacuum Cleaner:

  1. Press the power button to turn on the vacuum cleaner.
  2. Select the desired suction power setting if applicable.
  3. Move the vacuum cleaner over the desired area to clean.
  4. Empty the dust bin when full and clean the filter regularly for optimal performance.

Maintaining the Vacuum Cleaner:

  1. Clean the dust bin and filter after each use.
  2. Check for any blockages in the nozzle or hose.
  3. Store the vacuum cleaner in a cool, dry place when not in use.

Safety Requirements

Carefully read this manual before operating the device to avoid damage during use. Improper handling can lead to product damage, material damage, or harm to the user’s health.

WARNING! When operating the device, follow these precautions:

  • Before the first use, check if the technical specifications indicated on the product match the power supply parameters.
  • Use the vacuum cleaner only for household purposes. The device is not intended for industrial use.
  • Do not use the device in rooms with high humidity or on wet surfaces.
  • To avoid electric shock and injury, do not immerse the device or power cord in water or other liquids. If this happens, do not touch the device, immediately disconnect it from the power supply and contact a service center for inspection.
  • Always disconnect the device from the power supply before cleaning and when not in use.
  • Do not place the device near heat sources (radiators, heaters, etc.) and do not expose it to direct sunlight, as this may cause deformation of plastic parts.
  • The device is not intended for use by people (including children) with reduced physical, sensory, or intellectual capabilities, or lack of experience or knowledge, unless they are supervised or instructed on the use of the device by a person responsible for their safety.
  • Pay special attention to children and ensure that they do not play with the device. Children are not allowed to clean or use the device without supervision.
  • Ensure that air vents are not blocked. Do not allow foreign objects (dust, hair, clothing, etc.) to enter them.
  • Do not use the vacuum cleaner to collect sharp, hard objects, small toys, pins, nails, screws, etc., as they can damage the vacuum cleaner or dust container.

WARNING! To avoid overloading the power supply, do not connect the charger simultaneously with other powerful electrical devices to the same power line.

Description

  1. Power Button
  2. Battery
  3. Dust Container
  4. Tube Lock Button
  5. Tube
  6. Electric Brush Lock Button
  7. Electric Brush

Complete Set:

  • Crevice Nozzle
  • Upholstery Nozzle

Preparation for Use

  • Open the box, carefully remove the device, and free it from all packaging materials.
  • Remove all promotional stickers from the device body.
  • Check the delivery set. Remove all accessories and the adapter.
  • Ensure that all components of the device are undamaged.

WARNING! The vacuum cleaner units are made of plastic and carefully fitted to each other. To avoid damage to the locks and seating places, do not apply excessive force during assembly. Ensure that the parts are installed in the seating places without skewing and securely snapped into place.

  • Insert the tube tip into the electric brush socket for the floor so that the contact pins fit into the slots and press until it clicks.
  • Connect the tube to the suction hose.

Battery Charging

The battery in the set may be discharged. Before first use, fully charge the battery.

Do not charge the battery and do not store the battery at air temperatures below 5°C and above 40°C.

WARNING! Battery charging is carried out only using the adapter included in the device set.

  1. Insert the adapter plug into the battery socket.
  2. Plug the adapter into the mains. The battery indicator will flash, indicating the start of charging. When fully charged, all three charge indicators will light up.

WARNING! The adapter may become warm during charging – this is normal.

Operation

  • Before starting work, charge the vacuum cleaner battery and insert it.
  • To turn on the vacuum cleaner, press the “On/Off” button, to turn off – press it again.

Power Adjustment

  • Adjust the power using the – / + button.
  • You can select a low mode by pressing (-) or a high mode by pressing (+).

Using Accessories for Effective Cleaning

Electric Brush

Using the brush for floors with hard surfaces and for carpet cleaning.

For cleaning hard-to-reach places, use the crevice nozzle or disconnect the tube.

The upholstery nozzle is designed for cleaning furniture, curtains, decorative surfaces.

Dust Container Cleaning

  • Remove the dust container. To do this, press the dust container release button.
  • Empty the dust from the container. To do this, press the dust container opening button.

Filter Cleaning

Clean the HEPA filters at least once a year. With frequent use of the vacuum cleaner, rinse the filters after every 3-5 dust container cleanings.

  • Disconnect the vacuum cleaner from the power supply.
  • Open the dust container lid and remove the main filter.
  • Rinse the plastic parts of the filter with warm running water, as well as the filter sponge, then thoroughly dry all parts in the shade until all moisture evaporates.
  • After drying, install it back in place. Close the dust container lid by turning it clockwise.

WARNING! Do not turn on the vacuum cleaner without installed filters, as this may damage the electric motor.

WARNING! Do not wash the filters in a machine and do not dry them with a hairdryer.

Troubleshooting

WARNING! Before troubleshooting, disconnect the power supply. Only a qualified specialist can perform troubleshooting and repair, as described in this manual.

Issue Possible Causes Solution
Vacuum cleaner does not turn on Battery is discharged Charge the battery
Suction power is insufficient or decreases during operation Dust container is
full Empty the dust container
HEPA filter is dirty Clean or replace the HEPA filter
Air duct is clogged Clear all clogs in the dust container, tube, and/or

electric brush
Charging indicator does not blink when charging the battery| Vacuum cleaner is not fully assembled| Fully assemble the vacuum cleaner
Unexpected device shutdown during operation| Battery is discharged| Charge the battery
Unexpected electric brush stop during operation| Electric brush is clogged with hair, threads, wool, etc.| Clean the electric brush roller. If the roller does not rotate, contact the service center

Disposal

This device cannot be disposed of with regular household waste. To prevent possible harm to health and the environment, the product must be disposed of within the framework of an approved process for the disposal of electrical equipment. The disposal procedure must be carried out in accordance with local environmental regulations. You can get more detailed information about disposal, reuse, and recycling of the product from authorized agencies.

FAQs

How often should I clean the HEPA filter?

It is recommended to clean the HEPA filter every month for optimal filtration efficiency.

Can I use this vacuum cleaner on wet surfaces?

No, this vacuum cleaner is designed for dry surfaces only. Do not use it on wet surfaces to avoid damage.

How often should I clean the HEPA filter?

Clean the HEPA filters at least once a year. With frequent use of the vacuum cleaner, rinse the filters after every 3-5 dust container cleanings.

What should I do if the vacuum cleaner does not turn on?

Check if the battery is charged. If not, charge the battery before use.

Can I use the vacuum cleaner on wet surfaces?

No, do not use the vacuum cleaner on wet surfaces.

What should I do if the suction power decreases?

Check if the dust container is full or if the HEPA filter is dirty. Clean or replace the filter as necessary.

How do I dispose of the vacuum cleaner?

This device cannot be disposed of with regular household waste. Follow local regulations for the disposal of electrical equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals