Steel-Line SC Folding Door User Guide
- June 15, 2024
- Steel-Line
Table of Contents
Steel-Line SC Folding Door User Guide
FEATURES
- STRONG
- EASILY INSTALLED
- EFFORTLESS HAND PUSH OPENING
- CHOICE OF VARIOUS PANEL INFILLS
- SINGLE & BI FOLDING OPENING
The SC Folding Door is designed as a user friendly door with ventilation, easy opening and closing and access requirements to meet various specifications. A choice of various panel infills is available to provide a pleasing visual appearance.
The door travels on rollers suspended from an overhead track.
The SC Folding Door is available in single or bi-parting opening. For increased flexibility a curved track allows the multiple hinge panels to move around the curve.
The SC Folding Door is designed to ease the problem in opening and closing the door. With a push of a hand, the door will travel down to the pocket.
Constructed from extruded aluminium sections with interlocking hinges and rollers which allow the panel to fold / slide and stack in the pocket. There are two (2) available panel widths: 300mm and 150mm. The SC Folding Door featured in this brochure has 3mm clear polycarbonate.
Recommended For But Not Limited To
Retail, commercial premises, hospitality, medical, social and sports sectors.
maximum height of 4200mm by whatever extended width required.
Panel Sizes
Constructed from extruded aluminium sections with interlocking hinges and
rollers that allows the panel to fold / slide and stack in the pocket. There
are two (2) available panel widths: 300mm and 150mm.
Panel Infill
The SC Folding Door standard infill has the 3mm clear polycarbonate. (As
featured in the main brochure picture).
Other Options
3mm thick extruded solid aluminium panel or perforated with 4mm diameter
multi-hole panel. A benefit of these specifically designed extrusions allow
for improved security.
Operation
Manually operated (Hand Push). The single and double trolley travels through a
38mm x 35mm top track.
Locking System
The 54mm x 32mm Lead Post is machined to fit the lockset assembly. The Locking
Lead Post is placed approximately every 2 metres or depending on the width
requirements. Steel-Line unique lock clip on the external cover allows easy
access to the system for maintenance.
Finish
The SC Folding Door frames and track comes in matt natural anodised as
standard finish or standard polyester powder coated colours as an option.
Work By Others
Unless otherwise specified:
- Preparation of an opening by others.
- Preparation of structural support, access or any joinery works by others.
PANEL INFILL – INTERLOCKING 3mm T-SECTION
- POLYCARBONATE (Standard)
- SOLID (Option)
- MULTI HOLE (Option)
Steel-Line reserves the right to change specifications at any time without
notice.
V2 (0619) Copyright © Steel-Line Garage Door Australia. All rights reserved.
QBBC: 1129059 | CBS: 223285
Call 1300 427 243 | steel-line.com.au