CIPEM HK PM7-20-UK Bluetooth Remote Control User Manual
- June 16, 2024
- CIPEM HK
Table of Contents
CIPEM HK PM7-20-UK Bluetooth Remote Control User Manual
Product Information
Specifications
- Product Name: Bluetooth Remote Control
- Function: Pairing and controlling host machines
- Indicator: Orange indicator light
- Compatibility: Set-top boxes and TVs with Bluetooth
Bluetooth Remote Control Manual
Introduction
The Bluetooth remote control allows for pairing between the remote control and
the host machine. Once paired, the remote control can function with the host.
The Bluetooth remote control can realize the matching function between the
remote control and the host machine. After the pairing, the function between
the remote control and the host is realized.
Product Appearance
The Bluetooth remote control has a sleek design with user-friendly buttons for
easy navigation.
Remote Control Pairing
To pair the remote control with a set-top box or TV, follow these steps:
- Product Appearance: 20
Unpaired Remote Control
Power on or press the button, search for NGPM Handset from the host or TV Bluetooth set, then click the searched device and the orange indicator stops flashing and off. If you power on or press the button, the orange indicator starts, and the indicator will flash for 20 seconds, then again.
- Power on the remote control or press the button.
- On the host or TV Bluetooth settings, search for “NGPM Handset”.
- Select the searched device to initiate pairing.
- The orange indicator light will stop flashing and turn off, indicating a successful pairing.
- If the remote control is powered on or the button is pressed again, the orange indicator light will start flashing for 20 seconds before turning off.
Already Paired Remote Control
If you need to pair the remote control with another set-top box or TV and erase the current pairing information, follow these steps:
- Press and hold the home page and dish buttons simultaneously for 3 seconds.
- The orange indicator light will start flashing.
- Once the light flashes, it indicates that the pairing information has been successfully erased.
- Search for the remote control on the new set-top box or TV’s Bluetooth settings.
- Select the remote control to establish a pairing connection.
- Once the pairing is successful, the remote control can be used with the new device.
For already paired remote control: need to pair with other set-top box or TV need to erase the remote control pairing information, operation method: press the home page + dish button for 3 seconds, orange lights start flashing, mark pairing erase success, and then in the need to pair set-top box or TV to bluetooth set inside search remote control, and click the search to the remote control to pair connection, can after success can be used.
Note: If you encounter any difficulties during the pairing process, consult the dealer or an experienced radio/TV technician for assistance. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restrictions.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction
Frequently Asked Questions
Q: Can I use the Bluetooth remote control with any set-top box or TV?
A: The Bluetooth remote control is compatible with set-top boxes and TVs
that have Bluetooth capabilities.
Q: How do I know if the remote control is successfully paired?
A: When the remote control is successfully paired, the orange indicator
light will stop flashing and turn off.
Q: How do I erase the pairing information on the remote control?
A: Press and hold the home page and dish buttons simultaneously for 3
seconds to erase the pairing information.
Q: What should I do if I have trouble pairing the remote control?
A: If you encounter any difficulties during the pairing process, consult
the dealer or an experienced radio/TV technician for assistance.