Steel-Line SC19 Aluminium Roller Grille Instruction Manual
- June 13, 2024
- Steel-Line
Table of Contents
Steel-Line SC19 Aluminium Roller Grille
FEATURES
- CUSTOM BUILT
- VISION
- VENTILATION
- ROBUST
- EASILY
INSTALLED
Ultra Strong the SC19 Roller Grille provides increased flexibility in high level strength for external (shutter) and internal (shop front doors) applications and is the product of choice for areas where high air flow and vision is required. The SC19 Roller Grille is designed to suit openings up to 4.5m high and up to 8.0 metres wide in a single span.
Recommended Specification
The SC19 Roller Grille is suitable for a variety of commercial applications such as car parks, shopping centres, arcades, sporting complexes, clubs, bars and counter tops.
Curtain
The SC19 Roller Grille curtain is constructed from 19mm extruded aluminium tube at 75mm centres, connected with 40mm x 3mm designed links spaced at 500mm centres forming a brick like pattern.
Side Guides
100mm x 38mm aluminium extrusions which can be either fitted with a Rubber Twin Fin Extrusion or Mohair Felt Buffer for a quieter operation.
Locking
The SC19 Roller Grille doors can be fitted with a locking system. Locking is
centrally mounted within the Bottom Rail.
Manual locking is not recommended where doors are motorised.
Operation
The SC19 Roller Grille can be either manually operated by hand or electrically operated.
There is a wide selection of control methods available with motorised doors and these options can be discussed with Steeliness when determining your design requirements.
Motorisation Methods
The SC19 Roller Grille can be motorised with either three phase or single
phase, one horsepower motors suitable for high use environments or with the
use of a centrally mounted drum motor in low use environments.
The drum size is dependent on method of operation and size of opening. Please
contact Steel-Line for details.
Size
The SC19 Roller Grille is suitable for openings up to 7850mm wide and 4.5 metres high.
Finish
The SC19 Roller Grille is manufactured and supplied standard in a Clear Anodised Finish (Matt Natural), however an option to be powder coated is available.
Bulkhead Details
Curtain Details
Guide Details
Bundle Diameter
| Manual INDoor | Drop | 1200 | 1500 | 1800 | 2100 | 2400 | 2700 | 3000 | 3300 | 3600 |
|---|---|---|---|---|---|---|---|---|---|---|
| 203mm Drum | Bundle | 360 | 370 | 390 | 400 | 410 | 430 | 440 | 450 | 460 |
| Motorised Door | Drop | 1200 | 1500 | 1800 | 2100 | 2400 | 2700 | 3000 | 3300 | 3600 |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
230mm
Drum1| Bundle| 380| 390| 410| 420| 430| 440| 460| 470| 480
Customers Support
Steel-Line reserves the right to change specifications at any time without notice.
V3 (0621) Copyright © Steel-Line Garage Door Australia. All rights reserved.
Call 1300 427 243 | steel-line.com.au
