MONSTER Airmars XKT02 Bluetooth Wireless Headphone Instruction Manual
- June 4, 2024
- Monster
Table of Contents
MONSTER Airmars XKT02 Bluetooth Wireless Headphone
Product parameters
- Transmission distance ——————- 10m
- Driverdia.meter ————————CPlOmm
- Driver impedance ———————- 320±15%
- Sensitivity ————————– 96±3.0dB
- Frequency response range —————— 20Hz-2DkHz
- Battery capacity(charging case )————— 3.N300mAh
- Battery capacity(Headphone ) ————— 3.7V40mAh
- Charging time (charging case ) —————- 1.s hours
- Music playtime with charging case ————- – 20 hours
Packing list
- Headphone *2
- Silicone Ear Tips S *2
- Silicone Ear Tips M (installed) *2
- Silicone Ear Tips L *2
- Charging Case *]1
- Type-C Charging Cable *1
Product Schematic Description
Charge the charging case
Connect the charging case to the 5V power adapter with Type-C charging cable.
Rated input : 5V==40mA(Headphone) Rated input: 5V==300mA (charging case)
Tips : When the ice blue indicator flashes while closing the cover,
please charge in time.
Indicator guide
Product operating instructions
-
Power on
Open the cover of the charging case and take out the headphones, the headphones will turn on automatically. -
Power off
Method 1:put the headphone/s back to the charging case,and the headphone/s will power off automatically
Method 2: after disconnected from the Bluetooth device for 3 minutes. -
Pairing
Method 1 :open the cover of the charging case and take out the headphones.
Method 2 : search and click for “Monster Airmars XKTO2″ on the Bluetooth list of the smart device,and when connection is sUccessful,”Connected” will be heard Headphones will try reconnecting to the device within 3 minutes when connection is lost.
Note:
Fully charge the headphones and power off before an intended not-in-Use
period. Unplug the charging cable after charging.
Operation
Normal
Music playback
Phone
Game/music switching: device connected
Restore factory settings
Either the headphone is not connected to the Bluetooth device when turned on,
click the MFB 5 times to clear the previous pairing information and turn off.
Precautions
- Open the cover of the charging case, take out the headphones and the headphone will power on automatically, then connect with the paired device.After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed.
- Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
- Keep battery (battery pack) away from inflammable or excessive heat such as direct sunlight.
- Intermittent is normal during playback for wireless products due to environmental factors, device brand, users’ behavior, etc.
Warnings
- Do not use headphones at high volume for an extended period of time.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise warranty will be voided.
- Keep headphones away from any impact or vibration.
- Do not use any chemical solvents or cleaning agent on the headphones.
This table is compiled according to SJ/T 11364
O:Indicates that this hazardous substance contained in all of the
homogeneoUs materials for this part is below the limit requirement in GB/T
26572.
X: Indicates that this hazardous subatance contained in at least one of
the homogeneous materials Used for this part is above the limit requirement in
GB/T 26572.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ocur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follawing measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and recelver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardouS
substances in electronic and electrical produsts will not leak or mutate so
that the use of these [substances] will not result in any severe environmental
pollution, any bodily injury or damage to any assets.
Warranty Service
Dear user, this warranty card is the proof of your future warranty
application, please cooperate With the seller to fill it out and keep it for
future use!
- MONSTER Certificate of Approval
- Product No:.
- Production Time:
- PrESS
- QC:
Documents / Resources
|
MONSTER Airmars XKT02 Bluetooth Wireless
Headphone
[pdf] Instruction Manual
QSMXKT02, 2A8PV-QSMXKT02, 2A8PVQSMXKT02, Airmars XKT02 Bluetooth Wireless
Headphone, Airmars XKT02, Bluetooth Wireless Headphone, Wireless Headphone,
Headphone
---|---