Rowenta Digital CF7175F0 Hair Straightener Instruction Manual

: June 5, 2024
: Rowenta

Table of Contents

GENERAL DESCRIPTION
SAFETY INSTRUCTIONS
MAINTENANCE
ENVIRONMENT PROTECTION FIRST!
Documents / Resources

Please read the safety instructions before use

Rowenta Digital CF7175F0 Hair Straightener.

GENERAL DESCRIPTION

A. Tongs
B. ON/OFF switch
C. Smoothing plates with Ultrashine Nano Ceramic coating
D. Rotating power cord outlet
E. Power supply cord
F. Lock System (to lock and unlock the tongs)
G. Appliance power-on light

SAFETY INSTRUCTIONS

For your safety, this appliance complies with the applicable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility, Environmental…).
The appliance’s accessories become very hot during use. Avoid contact with the skin. Make sure that the supply cord never comes into contact with the hot parts of the appliance.
Check that the voltage of your electricity supply matches the voltage of your appliance. Any error when connecting the appliance can cause irreparable harm, not covered by the guarantee.
As an additional safety measure, we recommend the installation of a residual current difference device in the electrical circuit supplying the bathroom, acting at not more than 30 mA. Ask your installer for advice.
The installation of the appliance and its use must however comply with the standards in force in your country.
CAUTION: Never use your appliance with wet hands or near water contained in bathtubs, showers, sinks, or another container.
When using the appliance in the bathroom, unplug it after use as the presence of water nearby may pose a danger even when the appliance is turned off.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
Stop using your appliance and contact an Authorised Service Centre if:
– your appliance has fallen.
– it does not work correctly.
The appliance must be unplugged:
– before cleaning and maintenance procedures.
– if it is not working correctly.
– as soon as you have finished using it.
– if you leave the room, even momentarily.
Do not use it if the cord is damaged.
Do not immerse or put under running water, even for cleaning purposes.
Do not hold with damp hands.
Do not hold the appliance by the casing, which is hot, but by the handle.
Do not unplug by pulling on the cord, rather pull out by the plug.
Do not use an electrical extension lead.
Do not clean with abrasive or corrosive products.
Do not use at temperatures below 0°C and above 35°C.

GUARANTEE:

Your appliance is designed for use in the home only. It should not be used for professional purposes. The guarantee becomes null and void in the case of improper usage.