alverlamp DL03PL60 Recessed Down Light Instruction Manual

May 15, 2024
alverlamp

DL03PL60 Recessed Down Light
Instruction Manual

alverlamp DL03PL60 Recessed Down Light

DL03PL60 Recessed Down Light

REDONDO

DL03PL60 DL04PL60AL DL06PL60 DL09PL40AL DL12PL40 DL18PL30AL DL30PL30
DL03PL60AL DL06PL30 DL06PL60AL DL09PL60 DL12PL40AL DL18PL40 DL30PL40
DL04PL30 DL06PL30AL DL09PL30 DL09PL60AL DL12PL60 DL18PL40AL DL30PL60
DL04PL40 DL06PL40 DL09PL30AL DL12PL30 DL12PL60AL DL18PL60 DL30PL60AL
DL04PL60 DL06PL40AL DL09PL40 DL12PL30AL DL18PL30 DL18PL60AL DL12PLBLUE
DL06PL30D DL09PL30ALD DL12PL30ALD DL12PL30D
DL24PL30 DL24PL40 DL24PL60 DL10RWW DL25RWW
DLM0930 DLM0960 DLM1240 DLM2030 DLM2040 DLM2060 DLM3030
DLM0940 DLM1230 DLM1260 DLM2030AL DLM2040AL DLM2060AL DLM3040

DLM3060

CUADRADO

DL06PL30C| DL06PL60C| DL12PL40C| DL12PL60CAL| DL18PL40C| DL18PL60CAL| DL30PL60C
---|---|---|---|---|---|---
DL06PL40C| DL12PL30C| DL12PL40CAL| DL18PL30C| DL18PL40CAL| DL30PL30C| DL30PL60CAL
DL06PL40CAL| DL12PL30CAL| DL12PL60C| DL18PL30CAL| DL18PL60C| DL30PL40C|
DLM0930C| DLM0960C| DLM1240C| DLM2030C| DLM2040C| DLM2060C| DLM3030C
DLM0940C| DLM1230C| DLM1260C| DLM2030CAL| DLM2040CAL| DLM2060CAL| DLM3040C
DLM3060C

REDONDO IP44

DL10W30 DL10W40S DL10W60S DL15W40 DL25W30 DL25W60 DL35W40
DL10W40 DL10W60 DL15W30 DL15W60 DL25W40 DL35W30 DL35W60

ECO-PRO

DLP0630 DLP0640 DLP0660 DLP1230 DLP1240 DLP1260 DLP1830
DLP1840 DLP1860
  • Attention: Read the instructions in the installation manual carefully. The product must be installed in accordance with the instructions.
  • Before any installation or handling of the product, disconnect from the electrical current.
  • Do not damage the electrical connection parts.
  • If any part of the luminaire is broken, replace it immediately with a new one
  • Electronic products are not toys. Keep them away from children.
  • The light source in this luminaire must only be replaced by the manufacturer or its technical service.

alverlamp DL03PL60 Recessed Down Light 1

*Disconnect the power before starting.

  1. Make a cut in the roof. It must be at least 10 mm thick.
  2. The cut must be made according to the measurements indicated in the technical data sheet (C = cutting diameter).
  3. Connect the controller (driver) to the mains.
  4. The driver will be on the ceiling, leaving the quick connection cable as shown in figure 4.
  5.  Connect the driver to the luminaire. Lift the tabs in the direction of the arrows.
  6.  Insert the luminaire into the hole by releasing the tabs so that they press against the ceiling and hold the luminaire in place. Make sure to leave a safety gap between the components.

Alberola Verdú S.L.
Valencia – Spain
(+34) 962 811 002
www.alverlamp.es

Documents / Resources

| alverlamp DL03PL60 Recessed Down Light [pdf] Instruction Manual
DL03PL60 Recessed Down Light, DL03PL60, Recessed Down Light, Down Light, Light
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals