goobay 61673 Dual USB CTM PD Fast Charger Instruction Manual

61673, 61674

61673 Dual USB CTM PD Fast Charger

Specifications

USB-C™ PD socket (Power Delivery)
Input| 110-240 V , 50/60 Hz, 1.0 A
Output USB-C™ PD| 5.0 V , 3.0 A, 15.0 W max. or
9.0 V , 3.0 A, 27.0 W max. or
12.0 V , 2.5 A, 30.0 W max. or
15.0 V , 2.0 A, 30.0 W max. or
20.0 V , 1.5 A, 30.0 W max.
Output USB-A QC| 5.0 V , 2.4 A, 12.0 W max.
Output USB-C™ PD +
USB-A QC| USB-C™: 5.0 V , 3.0 A, 15.0 W max. or
9.0 V , 2.22 A, 20.0 W max. or
12.0 V , 1.67 A, 20.0 W max. or
15.0 V , 1.33 A, 20.0 W max. or
20.0 V , 1.0 A, 20.0 W max.
USB-A: 5.0 V , 2.4 A, 12.0 W max.
Average active efficiency| 82.3 %
Efficiency at low load (10 %)| 83.5 %
No-load power consumption| 0.09 W
Protection class|
Dimensions| 51.3 x 94.1 x 27.3 mm
Weight| 94 g
Colour| black| white

Symbols used

For indoor use only| IEC 60417- 5957|
---|---|---
Alternating current| IEC 60417- 5032|
Direct current| IEC 60417- 5031|
Recycling| ISO 7001 – PI PF 066|
Class II equipment| IEC 60417- 5172|

Safety instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully beforeuse.
  The user manual must be available for uncertainties and passing the product.

• Keep this user manual.

Notes for network separation
The product has no power switch and may be used only in easily accessible outlets to quickly remove it in an emergency and after use.

Voltage-free only with pulled plug.

• In case of emergency, during thunderstorms and after use, pull the product on its plug housing!
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.

A defective device may not be put into operation, but must be disconnected from mains and protected against further use.

• Use product, product parts and accessories only in perfect condition.
• Do not repair defective products yourself.
• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by thedocumentation, contact your dealer or producer.

Not meant for children. The product is not a toy!

• Secure packaging, small parts and insulation against accidental use.
• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
• Do not cover the product.

Description and function

2.1 Product
The product is a USB charger for charging and operating mobile devices via a USB-A port or USB-C™ port. The product supports the USB-C™ PD3.0 standard and the QC3.0 standard.
2.2 Scope of delivery
Dual USB-C™ PD Fast Charger (30 W), User Manual
2.3 Operating Elements
See Fig. 1.

1. Euro plug
2. USB-A QC socket
3. USB-C™ PD socket (Power Delivery)

Intended use

This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use.
We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms.
Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.

Connection and operation

See Fig. 2.

1. Connect up to two mobile devices to the USB-A or USB-C™ socket of the charger using suitable charging cables.
2. Plug the charger into a power socket.
3. Disconnect all plug connections after use.
   Charging cables are not included in the scope of delivery.
   The product does not contain any elements to be operated during use.

Maintenance, Care, Storage and Transportation

The product is maintenance-free.
NOTICE!
Material damage

• Unplug the product from the wall socket before cleaning.
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

Disposal instructions

7.1 Product
According to the European WEEE directive, electri- cal and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other.
Otherwise contaminative and hazardous substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right.
The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection.
WEEE No: 82898622

7.2 Packaging

Packaging can be disposed of free of charge at the suitable collection points – paper belongs in paper bins, plastics belong in yellow sacks and glass belongs in used glass bins.
DE4535302615620

EU Declaration of conformity

**** With the CE sign Goobay®, a registered trademark of the Wentronic GmbH ensures, that the product is conformed to the basic European standards and directives.

REV2023-07-28
V1.1anw
Subject to change without notice.
Goobay® by Wentronic GmbH
Pillmannstraße 12 38112
Braunschweig Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>