smappee EV-Base DC Fast Charger Installation Guide

EV-Base
DC Fast Charger
Installation Guide

What’s in the box?

In case of fi xed cable version:

Connection diagram

For more information, consult the full manual or video at smappee.com /smappee-manuals or via the QR codes:

Manual https://www.smappee.com/smappee-ev-base-installation-and- product-manual/

|

Video https://www.youtube.com/playlist?list=PLpfbNf1wK0HixkPrrjUOa2U9lZ9uv_kbA

---|---

Safety warning

Carrying out electrical work within the home or workplace can be dangerous and must be conducted according to the appropriate national safety standards and executed by a
certifi ed electrician.
For safety purposes, it is also necessary to power off the installation before proceeding with the physical installation.
For further safety instructions and more detailed information, please consult the full manual at smappee.com/smappee-manuals or via the QR code:

https://www.smappee.com/smappee-ev-base-
installation-and-product-manual/

How to install Smappee EV Base

1. Prepare the installation. Foresee an ethernet cable with stable internet connectivity, and power supply cables between the distribution panel and the EV Base.

2. Optional: install Smappee Infi nity in the distribution panel. Consult the Infi nity installation manual at smappee.com/smappee-manuals.
   Smart Charging functionality requires the installation of Smappee
   Infi nity to measure the grid and solar production.

3. Remove the fl oor and backplate and set aside.
   The anchors, washers, cable ties and charging cables (if applicable) are shipped inside the charging station.

4. Use the fl oor plate as a template to drill holes and mount the provided concrete anchors. Use a chemical anchor if necessary.

5. Place the EV Base onto the fl oor plate and hand-tighten the front anchor nuts.

6. Connect the power supply cables and ethernet cable to the EV Base. Mount the open-ended charging cables (if applicable) and cable ties for strain relief.
   See diagrams overleaf.

7. Switch on the power using the circuit breaker.

8. Download the Smappee App and follow the instructions to confi gure your Smappee charging station. If an Infi nity installation is already present, make sure to add the charging station to the existing Smappee location.

9. Use an EV or a tester to confi rm proper functioning of the charging station.

10. Mount the back plate and tighten the anchor nuts with a wrench.

11. Create a user account for the customer and share the location with this new username. Write the username, password and email address on a card for thecustomer for  future reference. This user account can be used in the Smappee App and Dashboard and to configure smart charging.

Please don’t litter.
Responsible publisher: Stefan Grosjean © Smappee nv
Evolis 104 -8530 Harelbeke, Belgium.
QIG-EV Base Installers Multi-language_70-0171_2022/1

Documents / Resources

| smappee EV-Base DC Fast Charger [pdf] Installation Guide
EV-Base DC fast charger, EV-Base, DC fast charger, fast charger
---|---

References

• Efficient energy use at home and for businesses | Smappee
• Efficient energy use at home and for businesses | Smappee
• Downloads - Smappee

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>