havit True Wireless Stereo Earbuds TW925 User Manual

User;s manual
True wireless stereo
earbuds TW925

Thanks for choosing havit

Product and accessories

Description of product structure

1. FMB (Touch panel)
2. Indicator light
3. MIC| 4. Power LED indicator
5. Charging port
---|---

Wearing Method

Gently cram the earbuds into the cochlea then adjust the appropriate angle.

Basic function

1. Power on,Bluetooth connection
   Follow the steps (Please confirm that your Phone Is builtin Bluetooth function)
   1. Power on
   Method 1: Remove earbuds from the charging case.
   Method 2: If the earbuds are power off outside the case, touch and hold MFB button for 3 seconds on both sides to turn them on. Turn on both earbuds. the earbuds indicators flash white, when the right earbud indicator flashes white and orange, the left earbud indicator is turn off, the product is ready for use.
   2. Tum on Bluetooth on your device and select “HAVIT TW925 ° referring to your phone instructions.
   3. Pairing mode can last up to 180 seconds if you miss the pairing time, you need to restart the device and operate following the procedural steps mentioned above.
   *Note:
   a). HAVIT TW925 remembers previously connected devices. When turned on, earbuds attempts to reconnect to previously connected devices.
   b). HAVIT TW925 will lose the connection whan deviating the working range of Bluetooth. The earbuds will reconnect automatically if you come back to the range in 3 minutes.

2. Power off
   Method 1: Put the earbuds Into the charging case, they will automatically shut off.
   Method 2: Touch and hold MFB for 3 seconds, the white light flashes three times, and the earbuds are turned off.

3. Answering Incoming calls Short press left or right MFB to answer incoming calls.

4. End the call
   Short press the left or right MFB to end the current call.

5. Decline incoming calls
   Touch and hold the left o¢ right MFB for 2 seconds to reject a call.

6. One key for voice assistant
   Double tap either the left or right MFB to activate voice assistant.

7. Music playing
   1. Play/Pause: tap the left or right MFB once;
   2. Long press the left MF for 2s to switch to the previous song
   3. Long press the right MFB for 2s to switch to the next song

8. Mono mode (take out any earbuds as a unilateral Bluetooth earbud)
   **** (note: single channel mode only needs to remove one of earbuds from the charging case; If two eabuds are removed before connection, the earbud will be used in bilateral channel mode by default.)
   1. Take out an earbud from charging case, the earbud automatically turn on and reconnect to previously connected devices.
   2. Switch from one earbud to the other when playing music, taking out the other earbud from the charging case and these two earbuds will connect automatically. Both earbuds will play music automatically and then put the sarbud which do not need anymore into the charging case and the switching process completes. (note: Call mode is applicable)

9. Clear the pairing list
   Take out both earbuds from the charging case and tum them off. And then touch and hold both MFB for 10 seconds, the earbuds will will restart.

10. Charging
    Case
    Charge the case using the Type-C cable connected to a computer or wall charger. The power LED indicator flashes white when charging and turn solid white when fully charged.

Earbuds
Put the earbuds back into the charging case for charging. While charging. the indicators turn white. Once full charge. the white lights turn off.

**Specification

**

Bluetooth Version: V5.1
Earbud Battery: 30mAh2(Fully charged in 1.5H)
Charging case battery: 300mAh
Charging case dimension: 553520mm
Earbud dimensions: 201512mm2
Net weight: 4.09°2(Earbuds)/20g(Charging case)
Wireless working range: 10M (without obstacles)
Speaker: 6MN*2
Speaker sensitivity: ±93 dB
Profiles supported: HFP, A2DP, AVRCP, AVDTP, GAP, SDP, SBC
Impedance: 16Ω±10%
Speaker frequency: 20~20KHz
Input voltage / current: DC SV/1A
Play time: 3-3.5H (60% volume)
Talk time: 3H
Standby time: 100H
Charging time: About 2H

Warnings

1. Please follow the instruction to operate.
2. Please charge the earbuds with input power below 5V/1A, in order to protect the battery.
3. Please store or use the earbuds in a normal temperature environment.
4. Please do not use this product near the water. Do not immerse this product in any liquid or splash any liquid on this product.
5. Plaase keep the earbuds from heat source. such as radiators, hot air regulators, stoves, or other heat generating instruments. As it is not anti-high temperature.
6. Don’t jam the ports of the earbuds, such as Charger port, LED port, and microphone etc.
7. In order to protect your hearing and extend the speaker service life, it is not recommended to adjust the volume to the maximum level for a long time.
8. Whatever reasons damage the earbuds, please feel free to contact our after-sales staff in time rather than repair by yourself. Otherwise, you will accept without after-sales service.

HOME

FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure statement.
  The device can be used in portable exposure condition without restriction
  FCC ID:2AI6I-TW925
  Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>