GE wk1xfdtv8ayzs30hl41f CYNC Indoor Smart Plug Instructions

June 13, 2024
GE

GE-LOGO

GE wk1xfdtv8ayzs30hl41f CYNC Indoor Smart Plug

GE-wk1xfdtv8ayzs30hl41f-CYNC-Indoor-Smart-Plug-PRODUCT

OVERVIEW

  • Connect to your Alexa or Google Assistant device to control vour devices with your voice.

Try these voice commands:

  • Amazon Alexa
  • Alexa, turn off the living room.
  • Alexa, good morning.
  • Alexa, turn on table lamp.

Google Assistant

  • Hey Google, turn on the lights.
  • Hey Google, turn off bathroom plug Hey Google, I’m leaving.

Set Up Using the CYNC App

  1. Plug your Smart Plug into an outlet
  2. Download the CYNC app
  3.  Add the Smart Plug to the CYNC app.
    • Tip: Having trouble connecting?
    • Move your Smart Plug closer to your router to commission.
  4. To set up voice control with Amazon Alexa or Google Assistant follow the steps in the CYNC app

FCC Compliance Statement

Compliance Notice:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equioment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
RF Exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 8 inches during normal operation.
RF Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must be installed to provide a separation distance of at least 8 inches from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
CAUTION – High Voltage – Disconnect power supply before servicing

  • Operation temperature: 0-40°C
    • For Control of Electronic Ballast. CFL LED Lamps
  • Type I Enclosure
    • 1P20
  • Pollution Degree 2
    • Impulse Voltage : 1500V
  • Type I.B action
    • Indoor use only.
  • GE and C by GE are trademarks of General Electric Company.
    • Used under trademark license.
  • Requires 2.4 GHz Wi-Fi and Android™ 8 or higher or iOS 14 or higher.
  • Google, Android, and Google Home are trademarks of Google LLC
  • Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

GE User Manuals

Related Manuals