VOLT POLSKA Volt Balanser Aku Protect 48v For 48v Batteries User Manual
- June 9, 2024
- VOLT POLSKA
Table of Contents
Volt Balanser Aku Protect 48v For 48v Batteries
User Manual 
PRODUCT MANUAL
BALANSER AKU PROTECT 48V
Equalizer/Balanser for
Gel/Flood/AGM Lead
Acid Batteries
Volt Balanser Aku Protect 48v For 48v Batteries
VOLT POLSKA Sp. z o.o.
ul. Grunwaldzka 76
81-771 Sopot
www.voltpolska.pl
[email protected] (58) 341-05-06
[email protected] (58) 341-38-80
[email protected] (22) 100-42-99
BALANSER AKU PROTECT 48V
Balanser AKU PROTECT 48V is used for the batteries which are connected in series to keep the voltage of batteries are equal when the batteries are charging or discharging. When the batteries work in series connection, the batteries voltage maybe will be not same due to the difference of each cell chemical compo-sition and temperature. And each bat-tery’s self-discharge rate also different. So even the batteries not work, their voltage of series batteries will be also different. These differences will cause battery lost balance, this means maybe one battery is overloaded and the other is insufficiently charged. The voltage difference will be increased with the battery repeated charge-discharge process. This will result in premature failure of the batteries.
Balanser Aku Protect 48V energy
transfer type equalizer, it can compensate for bat-teries with two sides. The
equalizer starts to work when there are 10mV between two batteries. The
current will flow from a higher voltage to low voltage,eventually reach
equilibrium. It can connect with batteriy system with 24 hours , to keep the
system energy balance automatically, no need manual maintenance.
Balanser Aku Protect 48Vsuitable for lead-acid batteries(VRLA), lithium iron
phos-phate batteries(LFP), nickel-cadmium secondary batteries(Ni/CD), and
nickel-metal hydride secondary batteries(Ni/MH). It starts work when the
voltage higher than 2.4V, it means that this equalier can be used in a single
cell battery range from 2.4V to 12V. One equalizer can connect 4 batteries
once a time, if battery less than the 4, the extra cable can be vacant
(positive and negative terminal should be avoided), does not affect the
equilibrium effects. The equalizer is not affected with battery connection
way, no matter in series or in parallel, both can work.
Technical data:
| Battery nominal voltage | 4*(2.4V/3.6V/6V/9V/12V) |
|---|---|
| Optimizing current | 0-10A |
| Quiescent current | 5mA(12V) 1.2mA(2.4) |
| Low Voltage Disconnect | 1.8V |
| Protection | Reverse polarity protection |
| Dimensions | 62x124x27mm |
| Weight | 400g |
Connect it as the following order:
- Red cable connect positive/+ pole. Black cable connect negative/- pole
- Connect the batteries as the pictures (connected in any order)
- If there are extra cables, avoid short circuits.
WARRANTY CARD
DATE OF PURCHASE|
---|---
SHIPPING ADDRESS|
SIGNATURE / STAMP|
DAMAGE DESCRIPTION|
SERVICE COMMENTS|
FILL IN IF NEEDEED
() Cross incorrect
I agree to pay the cost of inverter repair due to: expiration of the warranty
period / * warranty void
Before proceeding with the repair, service will inform by phone about the
exact costs of the repair.
Please attach a copy of the purchase document (receipt or invoice) to the
complaint.
The full regulations of service repairs can be found on our website
www.voltpolska.pl
[email protected] (58) 341-05-06
[email protected] (58) 341-38-80
[email protected] (22) 100-42-99