SYCREADER 2A5HC-U2-B Wireless 2D Barcode Scanner Instruction Manual

SYCREADER 2A5HC-U2-B Wireless 2D Barcode Scanner

Dear users, thank you for choosing our products. We will serve you with high- quality products, to ensure that you can use this product better, please read this manual carefully before use!

Introduction description

Universal handheld image 2D barcode scanner adopts the international advanced image transmission technology, with two-way communication and instant error correction feedback, to complete a variety of commonly used one-dimensional codes and two-dimensional code reading. Equipped with auxiliary illumination, it can be used in different lighting environments and can also be used at night, which is highly applicable. 360 ° read barcodes in any direction, faster reading and more efficient operation, suitable for commercial POS systems, supermarkets, warehousing and logistics, books, banking, transportation, postal, industrial, manufacturing production process management and other fields.

The setting code preceded with “**” is the default setting, not all functions of the product are listed in this manual, so please contact your supplier for more details. The rights used in this product, including the final interpretation rights of this instruction manual, are reserved by our Company (The contents of this instruction manual are modified without notice).

Technical parameters

Types of decoding

| 1D：EAN13, EAN 8, UPC-A, UPC-E0, UPC-E1,

Code128, Code39, Code93, Interleaved 2 of 5, Industrial 25, Matrix 2 of 5, Code11, CodeBar, MSI, RSS-14, RSS- Ltd, RSS- Exp, Standard 2 of 5, Plessey, ChinaPost 25, GS1 Composite

2D： QR Code, Data Matrix (DM), PDF417, Han

Xin, Micro PDF417, Micro QRCode, MaxiCode, Aztec Code, Code16K

Operating temperature| Celsius -0°C ~ +50°C
Storage temperature| Celsius -0°C ~ +60°C
Operating humidity| 5%-95% (non-condensing)
Prompt mode| Buzzer, LED
Scan mode| Manual, continuous
Seismic resistance| Pass the 1. 5-meter free fall test

Product Features

1. This product adopts a CMOS camera module, which can identify 1D/2D code and screen code.
2. Reading distance up to 20cm, which can quickly read out the information in the bar code.
3. This product is equipped with an inventory function that can directly carry out some simple daily inventory work.
4. All parameter settings can be completed by scanning the setting code and saved in the memory of the barcode scanner, the inventory content and parameter settings can still be retained after the power is turned off.
5. This product is equipped with a one-key pairing function, a simple and fast to complete the pairing of transmit/receive (This product has been paired at the factory).
6. Long distance transmission, 100 meters transmission distance in an open area (Indoor transmission distance of about 20-30 meters according to different structures and environment).

Installation method of receiver

1. Plug the wireless receiver into the USB port of the computer.
2. After the wireless receiver is plugged into the computer, the system will automatically install the driver (if the driver installation fails, please unplug the receiver or restart the computer).
3. Once the driver is installed, the receiver can transmit data with the paired scanner.

Bluetooth Connection For Bluetooth version
The bluetooth name of the device is“BARCODE SCANNER then click it to connect.

Turn on/off the configuration code setting

Interface settings

**Commonly terminator setting

**

**Reading mode setting

**

Data output encode format
Users can set the output format of the reading module by scanning the following setting codes so that the host can output Chinese data according to the specified encoding format.
Note: GbK format is used for Notepad, and UNICODE format is used for Word and common chat tool input boxes.

Wireless Function Setting

Transmission Mode Setting

Note

1. Normal Mode: the scan result will be uploaded to the computer in time (Default mode).
2. Inventory Mode: the scan result will be stored in the internal memory in this mode (when the internal memory is used up, the buzzer will “long beep” as a reminder).
3. Data lossless mode: the scan results will be uploaded to the computer in time when there is a signal, and the scan result will be stored in the internal memory when the signal is weak or no signal, and it will be automatically uploaded to a computer when it has a signal.
4. Data Upload： Scan the barcode to upload the data stored in the internal memory to the computer in turn (Suit for inventory mode and data lossless mode, please ensure the wireless signal is normal when uploading data, the buzzer will “beep” twice when the data is uploaded successfully when the data is upload failure, the buzzer will “beep” 3 times).
5. Total number of data： Scanning this barcode will display the total number of stored data (suited for inventory mode).
6. Clear Data: Scan this barcode to clear all data in the internal memory

Pairing Parameter Setting

Pairing Method
Scan the“One-click pairing” setting code first and plug the receiver into the USB port of the computer after hearing the buzzer “beep” 3 times.
Note : After the pairing is successful, the scanner’s buzzer will “beep” 3 times and disappear. The whole step will completed within 30 seconds.）

Sleep time setting

Note
Scan the “Set Sleep time” setting code first, then scan the setting code for the time you want to set.

Language settings

Virtual keyboard settings

Inverse reading mode

Battery Indicator

Buzzer Prompt Tone
Wireless barcode scanner Buzzer prompt tone list

Fault Resolution

1

|

There is no response after pressing the power on key

|

The scanner is out of battery

| Make sure that the host is powered on and is turned on when using the USB port that is connected to the USB port of the computer board.

The interface cable connected incorrectly

|

Check if the cable connection is loose

2

|

There is a fill light, but the

barcode cannot be read

| This type of barcode code system is not

turned on

|

Turn on the code by reading the setup code

The barcode is damaged| Try scanning other barcodes with the same barcode type
The distance between the scanner and the barcode is not appropriate|

Move the barcode scanner closer or farther away from the barcode

The barcode scanner is not high enough to cover the barcode completely|

Align the barcode to read the code

3

|

The scanned data is displayed

incorrectly on the host

|

Input method error

| Converts an input method to a standard English input method

Additional settings are made for the scanner

| Restore the scanner’s parameters to factory settings or contact the manufacturer’s  after-sales

service center

4

|

The barcode characters are

garbled or incorrect

| The keyboard country setting of the barcode scanner does not

match the keyboard

country used.

|

Set the barcode scanner keyboard country to match the country in which the keyboard is used

5

|

Other cases cannot be decoded

|

Device transfer error

| Turn off the device power, properly connect the device to the scanner, turn on the device power, restore the scanner parameters to the factory setting state and re-scan the code

Simple maintenance method

1. Stains and dust on the scanning window will affect the scanner’s work sometimes. It should use a good quality facial tissue and gently wipe it when cleaning.
2. Then blow it clean with a blowing balloon. If you wipe with poor paper for a long time, it will damage the surface finish of the scanning window and affect the reading effect of the scanner.
3. The scanner housing can be wiped with a soft clean cloth. If needed, add a small amount of dish soap to the water and wipe it with a soft cloth dipped in water.

FCC Compliance Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>