CONRAD 2813549 Rechargeable LED Head Lamp Instruction Manual
- June 15, 2024
- CONRAD
Table of Contents
2813549 Rechargeable LED Head Lamp
Safety Instructions
Rechargeable LED Head Lamp
Item no: 2813549
1 Intended use
The product is intended to be used as an LED head lamp.
The product can be used outdoors but must remain dry at all times. Rain and
excessive
sweat can damage the product.
If you use the product for purposes other than those described, the product
may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product.
Read the safety instructions and any accompanying instructions carefully and
store them in
a safe place. Make this product available to third parties only together with
the safety instructions
and any accompanying instructions.
All company names and product names are trademarks of their respective owners.
All rights
reserved.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers
Forum.
2 Operating instructions
Download the latest operating instructions from www.conrad.com/downloads or
scan the QR
code shown. Follow the instructions on the website.
3 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
This product is constructed according to protection class III.
4 Safety instructions
Read this document and the accompanying operating instructions carefully
and especially observe the safety information. If you do not follow the
safety instructions and information on proper handling, we assume no liability
for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
4.1 General
■ The product is not a toy. Keep it out of the reach of children and pets.
■ Do not leave packaging material lying around carelessly. This may become
dangerous
playing material for children.
■ If you have questions which remain unanswered by this information product,
contact our
technical support service or other technical personnel.
■ Maintenance, modifications and repairs must only be completed by a
technician or an
authorised repair centre.
4.2 Handling
■ Handle the product carefully. Jolts, impacts or a fall even from a low
height can damage
the product.
4.3 Operating environment
■ Do not place the product under any mechanical stress.
■ Protect the appliance from extreme temperatures, strong jolts, flammable
gases, steam
and solvents.
■ Protect the product from high humidity and moisture.
■ Protect the product from direct sunlight.
4.4 Operation
■ Consult an expert when in doubt about the operation, safety or connection of
the
product.
■ If it is no longer possible to operate the product safely, take it out of
operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself.
Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
4.5 LiPo battery
■ The rechargeable battery is permanently built into the product and cannot be replaced
■ Never damage the rechargeable battery. Damaging the casing of the
rechargeable battery
might cause an explosion or a fire! Unlike conventional batteries/rechargeable
batteries
(e.g. AA or AAA type), the casing of the LiPo rechargeable battery does not
consist
of a thin sheet but rather a sensitive plastic film only.
■ Never short-circuit the contacts of the rechargeable battery. Do not throw
the battery or
the product into fire. There is a danger of fire and explosion!
■ Charge the rechargeable battery regularly, even if you do are not using the
product. Due
to the rechargeable battery technology being used, you do not need to
discharge the rechargeable
battery first.
■ Never charge the rechargeable battery of the product unattended.
■ When charging, place the product on a surface that is not heat-sensitive. It
is normal that
a certain amount of heat is generated during charging.
4.6 LED light
■ Do not look directly into the LED light!
■ Do not look into the beam directly or with optical instruments!
4.7 Connected devices
■ Also observe the safety and operating instructions of any other devices
which are connected
to the product.
5 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Clean the product with a dry, fibre-free cloth.
6 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection
point.
Distributors of electrical and electronic equipment are legally obliged to
provide free takeback
of waste. Conrad provides the following return options free of charge (more
details on
our website):
■ in our Conrad offices
■ at the Conrad collection points
■ at the collection points of public waste management authorities or the
collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be
disposed of.
It should be noted that different obligations about the return or recycling of
WEEE may apply
in countries outside of Germany.
7 Technical data
Battery power supply ………………… 1x 3.7 V 1200 mAh LiPo rechargeable battery
Input port …………………………………. USB-C® port
Input voltage ……………………………. 5 V/DC
Input current ……………………………. max. 0.5 A
Illuminant ………………………………… LED
Replaceable illuminant ……………… No
Range……………………………………… max. 50 m
Material …………………………………… ABS
Operating temperature ……………… -20 to +55 °C
Operating humidity …………………… <85 % RH
Storage temperature …………………. -20 to +55 °C
Storage humidity ………………………. <85 % RH
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the
editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2813549_V1_0823_jh_ss_en 18014399471117067-2 I3/O1 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>