SUNRICHER SR-ZGP2801KS Zigbee Green Power Switch Instruction Manual
- June 15, 2024
- SUNRICHER
Table of Contents
**SUNRICHER SR-ZGP2801KS Zigbee Green Power Switch Instruction Manual
**
Important: Read All Instructions Prior to Installation.
Function introduction
Front side
Back side
The remote control can be fixed on the wall with 3M glue or absorbed on the metal surface with built-in magnet.
Product Data
| Switch Type | Configurable Zigee Green Power Switch |
|---|---|
| Transmission Range | 10-30m (typical) |
| Radio Frequency | 2.4GHz |
| Power Supply | Self-generated when switch is pressed |
| Buttons | 1 |
| Dimensions | Φ58*H18.16mm |
| Operating Temperature | -20 ℃ ~ +45 ℃ |
| Working Humidity | 10% ~ 95% RH non-condensing |
| Waterproof Grade | IP20 |
| Warranty | 5 years |
Product Description
The portable Zigbee Green Power switch is a wireless transmitter that communicates with Compatible Zigbee hub. The switch uses battery-free, energy- harvesting technology. Every time the switch is pressed, a micro-generator produces a small electrical current that powers a built-in transmitter. This transmitter sends wireless radio signals that are used to remotely control the compatible Zigbee system.
The switch can be configured through Zigbee App after added to the Zigbee hub. This switch has one button to trigger different actions of designated devices or zones with 3 events: short press, double click, long press. Action of each event and controlled object of the button can be configured through Zigbee App.
Safety & Warnings
- DO NOT expose the device to moisture.
Operations
Add the Switch to a Compatible Zigbee Hub (For instance Azoula Smart Hub and Azoula Smart App).
Step 1: tap on “+” button on “Home” page, then tap on “Zigbee-Green Power” to add Green Power switch.
Step 2: tap on “Switch (Key 1)”, then tap on “Start” button to add 1 key Green Power switch.
Step 3: Follow the instructions of the App to operate the switch and add it to the App.
Step 4: Once added successfully, tap on “Done” button to finish adding.
Step 5: The added switch will be shown on the “Home” Page.
Configure the switch through a Compatible Zigbee Hub (For instance Azoula Smart Hub and Azoula Smart App).
After the switch is added to the hub, navigate to “Smart” Page of the Azoula Smart App and you can use the switch to set “Automation”. Please refer to the user manual of Azoula Smart Hub to learn how to set automation using green power switch
Symbols
Documents / Resources
|
SUNRICHER SR-ZGP2801KS Zigbee Green Power
Switch
[pdf] Instruction Manual
SR-ZGP2801KS, SR-ZGP2801KS Zigbee Green Power Switch, Zigbee Green Power
Switch, Green Power Switch, Power Switch, Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>