iDPRT CP400114 Photo Printer User Manual

Table of Contents

Specifications

Please read the guide carefully before using the product and keep it properly.

-iDPRT-CP400114-Photo-Printer-02

Notes

-iDPRT-CP400114-Photo-Printer-3 Loading the Ribbon

Open the ribbon compartment cover
Insert the new ribbon and make it click into place Load the ribbon into the printer in the direction of the arrow marked on the ribbon until it clicks into place.
Close the ribbon compartment cover

Note
Please refer to page 8 for details on replacing the ribbon.

Open the covers of paper tray First open the outer cover①, then the inner cover②.
Load the photo paper with glossy side face up
Note
Placing more than 18 sheets of paper may damage the printer or cause malfunction. Do not touch the glossy side, except for the non-printable area.
Close the inner cover of paper tray

Open the paper tray compartment cover
Make sure the outer cover of paper tray is open
Load the paper tray to the printer
Please make sure to fully insert the paper tray into the compartment.(It slides about 2cm into the compartment.)

Connect the power cord
Insert the power cord into the power interface on the back of the printer
.Notes: Working Position
Please place the printer on the desk or other ﬂat and stable surfaces.
Leave some space (at least 10cm) behind the printer for paper out when printing.
Power on
Hold down the power button for 3 seconds. The yellow LED indicator is lighting, which indicates the printer is waiting for connection.
How to connect and print
Method 1: Print with “HeyPhoto” APP
Scan the QR code below, or search for “HeyPhoto” in the Google Play or App Store to download and install the App.
Open “HeyPhoto” App and follow the APP prompts to add and connect a device, and then follow the operation prompts in the APP to print.

Method 2：Print via USB from a computer

Connect the printer to the computer using a USB cable and powered on.
Go to https://www.idprt.com/downloads/modelid/74/classifyid/22/type/1.html to download the driver for Zeva 1966 Photo Printer and install it.
After installing the driver, select the photos then click”Print”，and select” iDPRT Zeva 1966” to print.

-iDPRT-CP400114-Photo-Printer-15

Note
This method is only applicable to Windows system.

-iDPRT-CP400114-Photo-Printer-16

Replacing the Ribbon

Open the ribbon compartment cover
To remove the used ribbon, move the lock upward that it will be ejected automatically
Load the new ribbon and make it click into place, then close the ribbon compartment cover

The best operating temperature is 0℃~40℃，if the environmental temperature is too high, the print quality may be aﬀected.
Please do not use the unoﬃcial adaptor, color ink and photo paper to ensure the print quality.
Do not touch the ﬁlm of color ink and the glossy side of photo paper in case of ﬁngerprints that may aﬀect the print quality.
During printing, the area around the thermal print head is very hot. Do not touch it, as you could be burned.
Do not pull out the photo paper by force during printing, or else it may damage the printer.
Please remove the paper tray when it is not used for a long time, and close the covers of the printer and the paper tray to avoid dust entering.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Any changes or mod iﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
FCC ID: 2AUTE-ZEVA1966

Thank you for purchasing our product! By using this product, you hereby signify that you have read the Disclaimer and all warnings carefully and that you understand and agree to abide by the terms and conditions herein. The user should observe safe and lawful practices including, but not limited to, those set forth in this document. Our company therefore holds no liability for damages caused by force majeure, used by a third party, incorrect use, non-compliance with this user manual or intentional misconduct on the part of the user.
Except for the scope prohibited by the applicable laws, the company is not responsible for any incidental, indirect, special or consequential damages, including but not limited to the loss of proﬁts, income or data due to the violation of explicit or implied warranties or conditions mentioned in this user manual.
Information in this user manual is for informational purposes only. It is subject to change without prior notice, due to the manufacturer’s continuous development program. This document supersedes and replaces all information supplied prior to the publication hereof.

Tips

All the drawings of product and accessories in the quick start guide are for reference only. Due to the updating and upgrading of the product, there may be some diﬀerences between the actual product and the drawings, please refer to the actual product.
For more product information, please contact iDPRT customer service.

Executive Standard: GB4943.1-2011, GB/T9254.1-2021, GB 17625.1-2012 Wi-Fi Connection: Wi-Fi IEEE 802.11b/g/n 2.4GHz

Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd.
Add: No.96, Rongyuan Road, Tong’an District, Xiamen, China, 361100 Oﬃcial Web: www.idprt.com
Customer Service Email 1: idprt@afterservice.vip
After Service Web: https://idprt.afterservice.vip