ACCURATE LR-SW Ligature Resistant Swinging Door System Instruction Manual
- June 15, 2024
- Accurate
Table of Contents
ACCURATE LR-SW Ligature Resistant Swinging Door System
Specifications
- Product Name: Ligature Resistant Swinging Door System
- Model Number: LR-SW
- Installation Type: Door frame or wall
- Required Space: At least 2 widths of space
- Hardware: Provided screws (22 sheet metal pins in Torx flathead screws and 7 #10 button head pin in Torx screws)
Product Usage Instructions
Door Location
- Locate where the LR-SW needs to be installed on the door frame or wall.
- Make sure there is at least 2 widths of space for the hardware to be installed properly. Height placement of the door may vary depending on the customer’s needs.
Mount Frame
Screw the pre-assembled LR-SW frame onto the area with provided screws (22 sheet metal pins in Torx flathead screws).
Mount Door
Screw LR-SW door into LR-SW frame with provided screws (7 #10 button head pin in Torx screws).
Adjust and Test
To adjust the door:
- Place the door in the closed position.
- Loosen the set screw.
- Place a Torx wrench in the pin on the bottom head screw.
- Adjust the door and tighten the set screw.
Frequently Asked Questions (FAQ)
Q: What is the required space for installation?
A: At least 2 width of space is required for proper installation of the
hardware.
Q: How do I adjust the door?
A: Follow the steps below to adjust the door:
- Place the door in the closed position.
- Loosen the set screw.
- Place a Torx wrench in the pin on the bottom head screw.
- Adjust the door and tighten the set screw.
Q: Where can I contact for sales or support?
You can contact us at:
- Address : 1 Annie Place, Stamford, CT 06902
- Phone : 203.348.8865
- Email : sales@accuratelockandhardware.com
- Website : www.accuratelockandhardware.com
INSTALLATION
-
Door location
-
Locate where the LR-SW needs to be installed on the door frame or wall.
-
Make sure there is at least 2⅛” width of space for the hardware to be installed properly.
-
Height placement of the door may vary depending on the customer’s needs.
-
Mount frame
-
Screw the pre-assembled LR-SW frame onto the area with provided screws (22 sheet metal pin in Torx flathead screws).
-
Mount door
-
Screw LR-SW door into LR-SW frame with provided screws (7 #10 button head pin in Torx screws)
-
Adjust + test
To adjust the door: -
place the door in the closed position. loosen the set screw.
-
place the Torx wrench in the pin on the bottom head screw.
-
adjust the door and tighten the set screw
1 Annie Place
Stamford, CT 06902
P : 203.348.8865
E :
sales@accuratelockandhardware.com
W:
www.accuratelockandhardware.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>