JBL Endurance Race Waterproof True Wireless Active Sport Earbuds User Guide
- June 6, 2024
- JBL
Table of Contents
ENDURANCE RACE WATERPROOF TRUE
WIRELESS ACTIVE SPORT EARBUDS
QUICK START GUIDE
WHAT’S IN THE BOX
APP
HOW TO WEAR
FIRST TIME USE
POWER ON & CONNECT
POWER ON & CONNECT
DUAL CONNECT
CONTROLS
- Enable advance controls by connecting your JBL ENDURANCE RACE TWS to JBL Headphones App .
- ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).
POWER OFF
MANUAL SETUP
DO MORE WITH THE APP
CHARGING
WATERPROOF & DUSTPROOF IP67
LED BEHAVIORS
TECH SPEC
| Model: | ENDURANCE RACE |
|---|---|
| Driver size: | 6 mm / 1/4” Dynamic Driver |
| Power supply: | 5 V 1 A |
| Earbud: | 6.2 g per pc (12.4 g combined)/ 0.014 lbs per pc (0.028 lbs combined) |
| Charging case: | 44.9 g / 0.099 lbs |
| Earbud battery type: | Lithium-ion Battery (70 mAh / 3.85 V) |
| Charging case battery type: | Lithium-ion Battery (550 mAh / 3.7 V) |
| Charging time: | < 2 hrs from empty |
| Music playtime with BT on: | ≥ 10 hrs |
| Frequency response: | 20 Hz – 20 kHz |
| Impedance: | 16 ohm |
| Sensitivity: | dB SPL@1 kHz |
| Maximum SPL: | 93 dB |
| Microphone sensitivity: | -38 dBV/Pa @1 kHz |
| Bluetooth version: | 5.2 |
| Bluetooth profile version: | A2DP V1.3, AVRCP V1.6, HFP V1.7 |
| Bluetooth transmitter frequency range: | 2.4 GHz – 2.4835 GHz |
| Bluetooth transmitter power: | < 10 dBm |
| Bluetooth transmitter modulation: | GFSK, π/4QPSK, 8DPSK |
| Maximum operation temperature: | 45 °C |
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLENDRACE) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.4161 W / kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
The Bluetooth® word mark and logos
are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by HARMAN International Industries, Incorporated is under license. Other
trademarks and trade names are those of their respective owners.
FCC ID: APIJBLENDRACE
Google, Android and Google Play are trademarks of Google LLC.
Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon,
Inc. or its affiliates.
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
HP_JBL_Endurance Race TWS_QSG_Global_CR_V12