Accurate TECHNOLOGY ProStop-2 Manual Digital Stop and Fence System User Manual

ProStop-2 Manual Digital Stop and Fence System
User Manual

ProStop-2 Manual Digital Stop and Fence System

A complete DIGITAL Stop & Fence System for miter saws, chop saws and similar tools. Includes an aluminum Fence, a Flip Stop with fine adjust, and double locks mechanism.
Quick Set indexing stops can be added. (Quick Sets are useful for setting cutting positions that are used often, allowing very fast stop positioning for your most common cut lengths.) Several add-on accessories are available, such as the 90°/45° reversible stop plates, large area gang stops, reach-in plates, and more.
ProStop uses our Series II measuring technology for the utmost in performance and reliability in almost all working environments (not recommended for use with full stream cutting fluids).
No other manual stop and fence system can match Pro Stop’s repeatability (.001 in.).
Additional Stops, Readouts, Fence extrusion, and accessories are also available.

Features

• Repeatable to .001 inch (0.02mm).
• Stop flips up so rough cuts can be made without loss of position.
• Fine adjust system is easy to learn and control.
• Configurable for use on left or right side of the saw.
• Battery powered system (no wiring to install/manage).
• Includes incremental mode with programmable kerf-compensating ability – for making repeat cut Return to the absolute mode when done, and there’s no need to recalibrate system.
• The Digital Readout can remember calibration information for 5 different blades/tools.
• Multiple stops can be used on the same fence (Use with the same saw, or with saws on both ends).
• Display position in 16 32nds, 64ths, decimal inches (3 places), or millimeters (2 places).
• Automatic power-off after 15 minutes. Automatic power-on when stop is moved.
• Programmable MONITOR mode can alert operator if stop is accidentally moved out of position.

Specifications

• Overall Accuracy: Within .010 inches
• Repeatability: Within .001 inches
• Resolution: .001 inches, .01mm, or 1/64 inches
• Power:  1ea. Size 123 Lithium battery
• Range:  Standard ranges up to 234 inches. Custom sizes to 470 inches.
• Maximum slew rate: 80 inches per second
• Warranty  1 year

Information/Notes:
Each new system is supplied with:

• Aluminum Fence
• Digital scale (bonded to fence)
• Digital stop assembly with double locks, fine-adjustment system, and flip-up stop
• Digital readout (factory configured and calibrated to match your system)
• Encoder/sensor (converts motion of the digital stop to digital reading)
• Installation/Mounting hardware
• Installation and Operation manual

Custom sizes up to 234 inches are available on request and generally do not extend lead time by more than 23 days. Extended ranges (above 234 inches) are made to order and generally require 3-4 weeks lead time. The physical length of each system is typically 6 inches longer than the measuring range. CAD files are available for all size ranges.
System is RoHs compliant (lead free).
Want to see it in action? Watch a Video of the system in use on our website!

Standard Systems:

Common Accessories:

commonly used
positions.
Second Digital Stop| 901-6400-001| A second stop WITH electronics.
45/90 plate| 750-7614-003| Can be used as a gang plate, or for cutting parts that are
mitered at 45 degrees.
Gang Stops (8, 10, 12)| 750-762x-001| Extends stop 8, 10, or 12 from the front of the fence.
Vertical Stop| 750-7615-001| Provides a larger stop contact surface.
Reach-in stop| 750-7619-001| Allows the stop to touch the blade (or can be used for
positioning stop when cutting small parts).

Accurate Technology Inc. 270 Rutledge Rd.
Fletcher, NC 28732
www.proscale.com
800.233.0580 828.654.7920

References

• Digital Measuring Devices | Accurate Technology Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>